Subsections


3 Superstructure

15 Overview of Superstructure

ESMF superstructure classes define an architecture for assembling Earth system applications from modeling components. A component may be defined in terms of the physical domain that it represents, such as an atmosphere or sea ice model. It may also be defined in terms of a computational function, such as a data assimilation system. Earth system research often requires that such components be coupled together to create an application. By coupling we mean the data transformations and, on parallel computing systems, data transfers, that are necessary to allow data from one component to be utilized by another. ESMF offers regridding methods and other tools to simplify the organization and execution of inter-component data exchanges.

In addition to components defined at the level of major physical domains and computational functions, components may be defined that represent smaller computational functions within larger components, such as the transformation of data between the physics and dynamics in a spectral atmosphere model, or the creation of nested higher resolution regions within a coarser grid. The objective is to couple components at varying scales both flexibly and efficiently. ESMF encourages a hierarchical application structure, in which large components branch into smaller sub-components (see Figure 2). ESMF also makes it easier for the same component to be used in multiple contexts without changes to its source code.


Key Features
Modular, component-based architecture.
Hierarchical assembly of components into applications.
Use of components in multiple contexts without modification.
Sequential or concurrent component execution.
Single program, multiple datastream (SPMD) applications for maximum portability and reconfigurability.
Multiple program, multiple datastream (MPMD) option for flexibility.

15.1 Superstructure Classes

There are a small number of classes in the ESMF superstructure:

An ESMF coupled application typically involves a parent Gridded Component, two or more child Gridded Components and one or more Coupler Components.

The parent Gridded Component is responsible for creating the child Gridded Components that are exchanging data, for creating the Coupler, for creating the necessary Import and Export States, and for setting up the desired sequencing. The application's “main” routine calls the parent Gridded Component's initialize, run, and finalize methods in order to execute the application. For each of these standard methods, the parent Gridded Component in turn calls the corresponding methods in the child Gridded Components and the Coupler Component. For example, consider a simple coupled ocean/atmosphere simulation. When the initialize method of the parent Gridded Component is called by the application, it in turn calls the initialize methods of its child atmosphere and ocean Gridded Components, and the initialize method of an ocean-to-atmosphere Coupler Component. Figure 3 shows this schematically.

Figure 2: ESMF enables applications such as the atmospheric general circulation model GEOS-5 to be structured hierarchically, and reconfigured and extended easily. Each box in this diagram is an ESMF Gridded Component.
\scalebox{0.9}{\includegraphics{ESMF_GEOS5}}


15.2 Hierarchical Creation of Components

Components are allocated computational resources in the form of Persistent Execution Threads, or PETs. A list of a Component's PETs is contained in a structure called a Virtual Machine, or VM. The VM also contains information about the topology and characteristics of the underlying computer. Components are created hierarchically, with parent Components creating child Components and allocating some or all of their PETs to each one. By default ESMF creates a new VM for each child Component, which allows Components to tailor their VM resources to match their needs. In some cases, a child may want to share its parent's VM - ESMF supports this, too.

A Gridded Component may exist across all the PETs in an application. A Gridded Component may also reside on a subset of PETs in an application. These PETs may wholly coincide with, be wholly contained within, or wholly contain another Component.

Figure 3: A call to a standard ESMF initialize (run, finalize) method by a parent component triggers calls to initialize (run, finalize) all of its child components.
\scalebox{1.0}{\includegraphics{ESMF_appunit}}


15.3 Sequential and Concurrent Execution of Components

When a set of Gridded Components and a Coupler runs in sequence on the same set of PETs the application is executing in a sequential mode. When Gridded Components are created and run on mutually exclusive sets of PETs, and are coupled by a Coupler Component that extends over the union of these sets, the mode of execution is concurrent.

Figure 4 illustrates a typical configuration for a simple coupled sequential application, and Figure 5 shows a possible configuration for the same application running in a concurrent mode.

Parent Components can select if and when to wait for concurrently executing child Components, synchronizing only when required.

It is possible for ESMF applications to contain some Component sets that are executing sequentially and others that are executing concurrently. We might have, for example, atmosphere and land Components created on the same subset of PETs, ocean and sea ice Components created on the remainder of PETs, and a Coupler created across all the PETs in the application.

Figure 4: Schematic of the run method of a coupled application, with an “Atmosphere” and an “Ocean” Gridded Component running sequentially with an “Atm-Ocean Coupler.” The top-level “Hurricane Model” Gridded Component contains the sequencing information and time advancement loop. The application driver, Coupler, and all Gridded Components are distributed over nine PETs.
\scalebox{1.0}{\includegraphics{ESMF_serial}}

Figure 5: Schematic of the run method of a coupled application, with an “Atmosphere” and an “Ocean” Gridded Component running concurrently with an “Atm-Ocean Coupler.” The top-level “Hurricane Model” Gridded Component contains the sequencing information and time advancement loop. The application driver, Coupler, and top-level “Hurricane Model” Gridded Component are distributed over nine PETs. The “Atmosphere” Gridded Component is distributed over three PETs and the “Ocean” Gridded Component is distributed over six PETs.
\scalebox{1.0}{\includegraphics{ESMF_concurrent}}


15.4 Intra-Component Communication

All data transfers within an ESMF application occur within a component. For example, a Gridded Component may contain halo updates. Another example is that a Coupler Component may redistribute data between two Gridded Components. As a result, the architecture of ESMF does not depend on any particular data communication mechanism, and new communication schemes can be introduced without affecting the overall structure of the application.

Since all data communication happens within a component, a Coupler Component must be created on the union of the PETs of all the Gridded Components that it couples.


15.5 Data Distribution and Scoping in Components

The scope of distributed objects is the VM of the currently executing Component. For this reason, all PETs in the current VM must make the same distributed object creation calls. When a Coupler Component running on a superset of a Gridded Component's PETs needs to make communication calls involving objects created by the Gridded Component, an ESMF-supplied function called ESMF_StateReconcile() creates proxy objects for those PETs that had no previous information about the distributed objects. Proxy objects contain no local data but can be used in communication calls (such as regrid or redistribute) to describe the remote source for data being moved to the current PET, or to describe the remote destination for data being moved from the local PET. Figure 6 is a simple schematic that shows the sequence of events in a reconcile call.

Figure 6: An ESMF_StateReconcile() call creates proxy objects for use in subsequent communication calls. The reconcile call would normally be made during Coupler initialization.
\scalebox{1.0}{\includegraphics{ESMF_reconcile}}


15.6 Performance

The ESMF design enables the user to configure ESMF applications so that data is transferred directly from one component to another, without requiring that it be copied or sent to a different data buffer as an interim step. This is likely to be the most efficient way of performing inter-component coupling. However, if desired, an application can also be configured so that data from a source component is sent to a distinct set of Coupler Component PETs for processing before being sent to its destination.

The ability to overlap computation with communication is essential for performance. When running with ESMF the user can initiate data sends during Gridded Component execution, as soon as the data is ready. Computations can then proceed simultaneously with the data transfer.

15.7 Object Model

The following is a simplified Unified Modeling Language (UML) diagram showing the relationships among ESMF superstructure classes. See Appendix A, A Brief Introduction to UML, for a translation table that lists the symbols in the diagram and their meaning.

\includegraphics{Comp_obj}

16 Application Driver and Required ESMF Methods

16.1 Description

Every ESMF application needs a driver code. Typically the driver layer is implemented as the "main" of the application, although this is not strictly an ESMF requirement. For most ESMF applications the task of the application driver will be very generic: Initialize ESMF, create a top-level Component and call its Initialize, Run and Finalize methods, before destroying the top-level Component again and calling ESMF Finalize.

ESMF provides a number of different application driver templates in the $ESMF_DIR/src/Superstructure/AppDriver directory. An appropriate one can be chosen depending on how the application is to be structured:

Sequential vs. Concurrent Execution

In a sequential execution model, every Component executes on all PETs, with each Component completing execution before the next Component begins. This has the appeal of simplicity of data consumption and production: when a Gridded Component starts, all required data is available for use, and when a Gridded Component finishes, all data produced is ready for consumption by the next Gridded Component. This approach also has the possibility of less data movement if the grid and data decomposition is done such that each processor's memory contains the data needed by the next Component.

In a concurrent execution model, subgroups of PETs run Gridded Components and multiple Gridded Components are active at the same time. Data exchange must be coordinated between Gridded Components so that data deadlock does not occur. This strategy has the advantage of allowing coupling to other Gridded Components at any time during the computational process, including not having to return to the calling level of code before making data available.

Pairwise vs. Hub and Spoke

Coupler Components are responsible for taking data from one Gridded Component and putting it into the form expected by another Gridded Component. This might include regridding, change of units, averaging, or binning.

Coupler Components can be written for pairwise data exchange: the Coupler Component takes data from a single Component and transforms it for use by another single Gridded Component. This simplifies the structure of the Coupler Component code.

Couplers can also be written using a hub and spoke model where a single Coupler accepts data from all other Components, can do data merging or splitting, and formats data for all other Components.

Multiple Couplers, using either of the above two models or some mixture of these approaches, are also possible.

Implementation Language

The ESMF framework currently has Fortran interfaces for all public functions. Some functions also have C interfaces, and the number of these is expected to increase over time.

Number of Executables

The simplest way to run an application is to run the same executable program on all PETs. Different Components can still be run on mutually exclusive PETs by using branching (e.g., if this is PET 1, 2, or 3, run Component A, if it is PET 4, 5, or 6 run Component B). This is a SPMD model, Single Program Multiple Data.

The alternative is to start a different executable program on different PETs. This is a MPMD model, Multiple Program Multiple Data. There are complications with many job control systems on multiprocessor machines in getting the different executables started, and getting inter-process communications established. ESMF currently has some support for MPMD: different Components can run as separate executables, but the Coupler that transfers data between the Components must still run on the union of their PETs. This means that the Coupler Component must be linked into all of the executables.

16.2 Constants


16.2.1 ESMF_END

DESCRIPTION:
The ESMF_End_Flag determines how an ESMF application is shut down.

The type of this flag is:

type(ESMF_End_Flag)

The valid values are:

ESMF_END_ABORT
Global abort of the ESMF application. There is no guarantee that all PETs will shut down cleanly during an abort. However, all attempts are made to prevent the application from hanging and the LogErr of at least one PET will be completely flushed during the abort. This option should only be used if a condition is detected that prevents normal continuation or termination of the application. Typical conditions that warrant the use of ESMF_END_ABORT are those that occur on a per PET basis where other PETs may be blocked in communication calls, unable to reach the normal termination point. An aborted application returns to the parent process with a system dependent indication that a failure occurred during execution.
ESMF_END_NORMAL
Normal termination of the ESMF application. Wait for all PETs of the global VM to reach ESMF_Finalize() before termination. This is the clean way of terminating an application. MPI_Finalize() will be called in case of MPI applications.
ESMF_END_KEEPMPI
Same as ESMF_END_NORMAL but MPI_Finalize() will not be called. It is the user code's responsibility to shut down MPI cleanly if necessary.

16.3 Use and Examples

ESMF encourages application organization in which there is a single top-level Gridded Component. This provides a simple, clear sequence of operations at the highest level, and also enables the entire application to be treated as a sub-Component of another, larger application if desired. When a simple application is organized in this fashion the standard AppDriver can probably be used without much modification.

Examples of program organization using the AppDriver can be found in the src/Superstructure/AppDriver directory. A set of subdirectories within the AppDriver directory follows the naming convention:

<seq|concur>_<pairwise|hub>_<f|c>driver_<spmd|mpmd>

The example that is currently implemented is seq_pairwise_fdriver_spmd, which has sequential component execution, a pairwise coupler, a main program in Fortran, and all processors launching the same executable. It is also copied automatically into a top-level quick_start directory at compilation time.

The user can copy the AppDriver files into their own local directory. Some of the files can be used unchanged. Others are template files which have the rough outline of the code but need additional application-specific code added in order to perform a meaningful function. The README file in the AppDriver subdirectory or quick_start directory contains instructions about which files to change.

Examples of concurrent component execution can be found in the system tests that are bundled with the ESMF distribution.

 
  ---------------------------------------------------------------------------
  ---------------------------------------------------------------------------
   EXAMPLE:  This is an AppDriver.F90 file for a sequential ESMF application.
  ---------------------------------------------------------------------------
  ---------------------------------------------------------------------------
  
    The ChangeMe.F90 file that's included below contains a number of
    definitions that are used by the AppDriver, such as the name of the
    application's main configuration file and the name of the application's
    SetServices routine.  This file is in the same directory as the
    AppDriver.F90 file.
  ---------------------------------------------------------------------------
 
 #include "ChangeMe.F90"
 
     program ESMF_AppDriver
 #define ESMF_METHOD "program ESMF_AppDriver"
 
 #include "ESMF.h"
 
     ! ESMF module, defines all ESMF data types and procedures
     use ESMF
 
     ! Gridded Component registration routines.  Defined in "ChangeMe.F90"
     use USER_APP_Mod, only : SetServices => USER_APP_SetServices
 
     implicit none
 
  ---------------------------------------------------------------------------
    Define local variables
  ---------------------------------------------------------------------------
 
     ! Components and States
     type(ESMF_GridComp) :: compGridded
     type(ESMF_State) :: defaultstate
 
     ! Configuration information
     type(ESMF_Config) :: config
 
     ! A common Grid
     type(ESMF_Grid) :: grid
 
     ! A Clock, a Calendar, and timesteps
     type(ESMF_Clock) :: clock
     type(ESMF_TimeInterval) :: timeStep
     type(ESMF_Time) :: startTime
     type(ESMF_Time) :: stopTime
 
     ! Variables related to the Grid
     integer :: i_max, j_max
 
     ! Return codes for error checks
     integer :: rc, localrc
 
  ---------------------------------------------------------------------------
    Initialize ESMF.  Note that an output Log is created by default.
  ---------------------------------------------------------------------------
 
     call ESMF_Initialize(defaultCalKind=ESMF_CALKIND_GREGORIAN, rc=localrc)
     if (ESMF_LogFoundError(localrc, ESMF_ERR_PASSTHRU, &
         ESMF_CONTEXT, rcToReturn=rc)) &
         call ESMF_Finalize(rc=localrc, endflag=ESMF_END_ABORT)
 
     call ESMF_LogWrite("ESMF AppDriver start", ESMF_LOGMSG_INFO)
 
  ---------------------------------------------------------------------------
    Create and load a configuration file.
    The USER_CONFIG_FILE is set to sample.rc in the ChangeMe.F90 file.
    The sample.rc file is also included in the directory with the
    AppDriver.F90 file.
  ---------------------------------------------------------------------------
 
     config = ESMF_ConfigCreate(rc=localrc)
     if (ESMF_LogFoundError(localrc, ESMF_ERR_PASSTHRU, &
         ESMF_CONTEXT, rcToReturn=rc)) &
         call ESMF_Finalize(rc=localrc, endflag=ESMF_END_ABORT)
 
     call ESMF_ConfigLoadFile(config, USER_CONFIG_FILE, rc = localrc)
     if (ESMF_LogFoundError(localrc, ESMF_ERR_PASSTHRU, &
         ESMF_CONTEXT, rcToReturn=rc)) &
         call ESMF_Finalize(rc=localrc, endflag=ESMF_END_ABORT)
 
  ---------------------------------------------------------------------------
    Get configuration information.
  
    A configuration file like sample.rc might include:
    - size and coordinate information needed to create the default Grid.
    - the default start time, stop time, and running intervals
      for the main time loop.
  ---------------------------------------------------------------------------
 
     call ESMF_ConfigGetAttribute(config, i_max, label='I Counts:', &
       default=10, rc=localrc)
     if (ESMF_LogFoundError(localrc, ESMF_ERR_PASSTHRU, &
         ESMF_CONTEXT, rcToReturn=rc)) &
         call ESMF_Finalize(rc=localrc, endflag=ESMF_END_ABORT)
     call ESMF_ConfigGetAttribute(config, j_max, label='J Counts:', &
       default=40, rc=localrc)
     if (ESMF_LogFoundError(localrc, ESMF_ERR_PASSTHRU, &
         ESMF_CONTEXT, rcToReturn=rc)) &
         call ESMF_Finalize(rc=localrc, endflag=ESMF_END_ABORT)
 
  ---------------------------------------------------------------------------
    Create the top Gridded Component.
  ---------------------------------------------------------------------------
 
     compGridded = ESMF_GridCompCreate(name="ESMF Gridded Component", &
         rc=localrc)
     if (ESMF_LogFoundError(localrc, ESMF_ERR_PASSTHRU, &
         ESMF_CONTEXT, rcToReturn=rc)) &
         call ESMF_Finalize(rc=localrc, endflag=ESMF_END_ABORT)
 
     call ESMF_LogWrite("Component Create finished", ESMF_LOGMSG_INFO)
 
  ----------------------------------------------------------------------------
    Register the set services method for the top Gridded Component.
  ----------------------------------------------------------------------------
 
     call ESMF_GridCompSetServices(compGridded, userRoutine=SetServices, rc=rc)
     if (ESMF_LogFoundError(rc, msg="Registration failed", rcToReturn=rc)) &
         call ESMF_Finalize(rc=localrc, endflag=ESMF_END_ABORT)
 
  ----------------------------------------------------------------------------
    Create and initialize a Clock.
  ----------------------------------------------------------------------------
 
       call ESMF_TimeIntervalSet(timeStep, s=2, rc=localrc)
       if (ESMF_LogFoundError(localrc, ESMF_ERR_PASSTHRU, &
             ESMF_CONTEXT, rcToReturn=rc)) &
             call ESMF_Finalize(rc=localrc, endflag=ESMF_END_ABORT)
 
       call ESMF_TimeSet(startTime, yy=2004, mm=9, dd=25, rc=localrc)
       if (ESMF_LogFoundError(localrc, ESMF_ERR_PASSTHRU, &
             ESMF_CONTEXT, rcToReturn=rc)) &
             call ESMF_Finalize(rc=localrc, endflag=ESMF_END_ABORT)
 
       call ESMF_TimeSet(stopTime, yy=2004, mm=9, dd=26, rc=localrc)
       if (ESMF_LogFoundError(localrc, ESMF_ERR_PASSTHRU, &
             ESMF_CONTEXT, rcToReturn=rc)) &
             call ESMF_Finalize(rc=localrc, endflag=ESMF_END_ABORT)
 
       clock = ESMF_ClockCreate(timeStep, startTime, stopTime=stopTime, &
                 name="Application Clock", rc=localrc)
       if (ESMF_LogFoundError(localrc, ESMF_ERR_PASSTHRU, &
             ESMF_CONTEXT, rcToReturn=rc)) &
             call ESMF_Finalize(rc=localrc, endflag=ESMF_END_ABORT)
 
  ----------------------------------------------------------------------------
    Create and initialize a Grid.
  
    The default lower indices for the Grid are (/1,1/).
    The upper indices for the Grid are read in from the sample.rc file,
    where they are set to (/10,40/).  This means a Grid will be
    created with 10 grid cells in the x direction and 40 grid cells in the
    y direction.  The Grid section in the Reference Manual shows how to set
    coordinates.
  ----------------------------------------------------------------------------
 
       grid = ESMF_GridCreateNoPeriDim(maxIndex=(/i_max, j_max/), &
                              name="source grid", rc=localrc)
       if (ESMF_LogFoundError(localrc, ESMF_ERR_PASSTHRU, &
             ESMF_CONTEXT, rcToReturn=rc)) &
             call ESMF_Finalize(rc=localrc, endflag=ESMF_END_ABORT)
 
       ! Attach the grid to the Component
       call ESMF_GridCompSet(compGridded, grid=grid, rc=localrc)
       if (ESMF_LogFoundError(localrc, ESMF_ERR_PASSTHRU, &
             ESMF_CONTEXT, rcToReturn=rc)) &
             call ESMF_Finalize(rc=localrc, endflag=ESMF_END_ABORT)
 
  ----------------------------------------------------------------------------
    Create and initialize a State to use for both import and export.
    In a real code, separate import and export States would normally be
    created.
  ----------------------------------------------------------------------------
 
       defaultstate = ESMF_StateCreate(name="Default State", rc=localrc)
       if (ESMF_LogFoundError(localrc, ESMF_ERR_PASSTHRU, &
             ESMF_CONTEXT, rcToReturn=rc)) &
             call ESMF_Finalize(rc=localrc, endflag=ESMF_END_ABORT)
 
  ----------------------------------------------------------------------------
    Call the initialize, run, and finalize methods of the top component.
    When the initialize method of the top component is called, it will in
    turn call the initialize methods of all its child components, they
    will initialize their children, and so on.  The same is true of the
    run and finalize methods.
  ----------------------------------------------------------------------------
 
       call ESMF_GridCompInitialize(compGridded, importState=defaultstate, &
         exportState=defaultstate, clock=clock, rc=localrc)
       if (ESMF_LogFoundError(rc, msg="Initialize failed", rcToReturn=rc)) &
           call ESMF_Finalize(rc=localrc, endflag=ESMF_END_ABORT)
 
       call ESMF_GridCompRun(compGridded, importState=defaultstate, &
         exportState=defaultstate, clock=clock, rc=localrc)
       if (ESMF_LogFoundError(rc, msg="Run failed", rcToReturn=rc)) &
           call ESMF_Finalize(rc=localrc, endflag=ESMF_END_ABORT)
 
       call ESMF_GridCompFinalize(compGridded, importState=defaultstate, &
         exportState=defaultstate, clock=clock, rc=localrc)
       if (ESMF_LogFoundError(rc, msg="Finalize failed", rcToReturn=rc)) &
           call ESMF_Finalize(rc=localrc, endflag=ESMF_END_ABORT)
 
 
  ----------------------------------------------------------------------------
    Destroy objects.
  ----------------------------------------------------------------------------
 
       call ESMF_ClockDestroy(clock, rc=localrc)
       if (ESMF_LogFoundError(localrc, ESMF_ERR_PASSTHRU, &
         ESMF_CONTEXT, rcToReturn=rc)) &
         call ESMF_Finalize(rc=localrc, endflag=ESMF_END_ABORT)
 
       call ESMF_StateDestroy(defaultstate, rc=localrc)
       if (ESMF_LogFoundError(localrc, ESMF_ERR_PASSTHRU, &
         ESMF_CONTEXT, rcToReturn=rc)) &
         call ESMF_Finalize(rc=localrc, endflag=ESMF_END_ABORT)
 
       call ESMF_GridCompDestroy(compGridded, rc=localrc)
       if (ESMF_LogFoundError(localrc, ESMF_ERR_PASSTHRU, &
         ESMF_CONTEXT, rcToReturn=rc)) &
         call ESMF_Finalize(rc=localrc, endflag=ESMF_END_ABORT)
 
  ----------------------------------------------------------------------------
    Finalize and clean up.
  ----------------------------------------------------------------------------
 
     call ESMF_Finalize()
 
     end program ESMF_AppDriver

16.4 Required ESMF Methods

There are a few methods that every ESMF application must contain. First, ESMF_Initialize() and ESMF_Finalize() are in complete analogy to MPI_Init() and MPI_Finalize() known from MPI. All ESMF programs, serial or parallel, must initialize the ESMF system at the beginning, and finalize it at the end of execution. The behavior of calling any ESMF method before ESMF_Initialize(), or after ESMF_Finalize() is undefined.

Second, every ESMF Component that is accessed by an ESMF application requires that its set services routine is called through ESMF_<Grid/Cpl>CompSetServices(). The Component must implement one public entry point, its set services routine, that can be called through the ESMF_<Grid/Cpl>CompSetServices() library routine. The Component set services routine is responsible for setting entry points for the standard ESMF Component methods Initialize, Run, and Finalize.

Finally, the Component can optionally call ESMF_<Grid/Cpl>CompSetVM() before calling ESMF_<Grid/Cpl>CompSetServices(). Similar to ESMF_<Grid/Cpl>CompSetServices(), the ESMF_<Grid/Cpl>CompSetVM() call requires a public entry point into the Component. It allows the Component to adjust certain aspects of its execution environment, i.e. its own VM, before it is started up.

The following sections discuss the above mentioned aspects in more detail.

16.4.1 ESMF_Initialize - Initialize ESMF


INTERFACE:

       subroutine ESMF_Initialize(defaultConfigFileName, defaultCalKind, &
         defaultLogFileName, logappendflag, logkindflag, mpiCommunicator,  &
         ioUnitLBound, ioUnitUBound, vm, rc)
ARGUMENTS:
 -- The following arguments require argument keyword syntax (e.g. rc=rc). --
       character(len=*),        intent(in),  optional :: defaultConfigFileName
       type(ESMF_CalKind_Flag), intent(in),  optional :: defaultCalKind
       character(len=*),        intent(in),  optional :: defaultLogFileName
       logical,                 intent(in),  optional :: logappendflag
       type(ESMF_LogKind_Flag), intent(in),  optional :: logkindflag
       integer,                 intent(in),  optional :: mpiCommunicator
       integer,                 intent(in),  optional :: ioUnitLBound
       integer,                 intent(in),  optional :: ioUnitUBound
       type(ESMF_VM),           intent(out), optional :: vm
       integer,                 intent(out), optional :: rc
STATUS:

DESCRIPTION:

This method must be called once on each PET before any other ESMF methods are used. The method contains a barrier before returning, ensuring that all processes made it successfully through initialization.

Typically ESMF_Initialize() will call MPI_Init() internally unless MPI has been initialized by the user code before initializing the framework. If the MPI initialization is left to ESMF_Initialize() it inherits all of the MPI implementation dependent limitations of what may or may not be done before MPI_Init(). For instance, it is unsafe for some MPI implementations, such as MPICH, to do I/O before the MPI environment is initialized. Please consult the documentation of your MPI implementation for details.

Note that when using MPICH as the MPI library, ESMF needs to use the application command line arguments for MPI_Init(). However, ESMF acquires these arguments internally and the user does not need to worry about providing them. Also, note that ESMF does not alter the command line arguments, so that if the user obtains them they will be as specified on the command line (including those which MPICH would normally strip out).

ESMF_Initialize() supports running ESMF inside a user MPI program. Details of this feature are discussed under the VM example 49.3.4. It is not necessary that all MPI ranks are handed to ESMF. Section 49.3.5 shows how an MPI communicator can be used to execute ESMF on a subset of MPI ranks. Finally ESMF_Initialize() supports running multiple concurrent instances of ESMF under the same user MPI program. This feature is discussed under 49.3.6.

By default, ESMF_Initialize() will open multiple error log files, one per processor. This is very useful for debugging purpose. However, when running the application on a large number of processors, opening a large number of log files and writing log messages from all the processors could become a performance bottleneck. Therefore, it is recommended to turn the Error Log feature off in these situations by setting logkindflag to ESMF_LOGKIND_NONE.

When integrating ESMF with applications where Fortran unit number conflicts exist, the optional ioUnitLBound and ioUnitUBound arguments may be used to specify an alternate unit number range. See section 51.2.1 for more information on how ESMF uses Fortran unit numbers.

Before exiting the application the user must call ESMF_Finalize() to release resources and clean up ESMF gracefully.

The arguments are:

[defaultConfigFilename]
Name of the default configuration file for the entire application.
[defaultCalKind]
Sets the default calendar to be used by ESMF Time Manager. See section 41.2.1 for a list of valid options. If not specified, defaults to ESMF_CALKIND_NOCALENDAR.
[defaultLogFileName]
Name of the default log file for warning and error messages. If not specified, defaults to ESMF_ErrorLog.
[logappendflag]
If the default log file already exists, a value of .false. will set the file position to the beginning of the file. A value of .true. sets the position to the end of the file. If not specified, defaults to .true..
[logkindflag]
Sets the default Log Type to be used by ESMF Log Manager. See section 47.2.2 for a list of valid options. If not specified, defaults to ESMF_LOGKIND_MULTI.
[mpiCommunicator]
MPI communicator defining the group of processes on which the ESMF application is running. See section 49.3.5 and 49.3.6 for details. If not specified, defaults to MPI_COMM_WORLD.
[ioUnitLBound]
Lower bound for Fortran unit numbers used within the ESMF library. Fortran units are primarily used for log files. Legal unit numbers are positive integers. A value higher than 10 is recommended in order to avoid the compiler-specific reservations which are typically found on the first few units. If not specified, defaults to ESMF_LOG_FORT_UNIT_NUMBER, which is distributed with a value of 50.
[ioUnitUBound]
Upper bound for Fortran unit numbers used within the ESMF library. Must be set to a value at least 5 units higher than ioUnitLBound. If not specified, defaults to ESMF_LOG_UPPER, which is distributed with a value of 99.
[vm]
Returns the global ESMF_VM that was created during initialization.
[rc]
Return code; equals ESMF_SUCCESS if there are no errors.

16.4.2 ESMF_IsInitialized - Query Initialized status of ESMF


INTERFACE:

     function ESMF_IsInitialized(rc)
RETURN VALUE:
       logical :: ESMF_IsInitialized
ARGUMENTS:
 -- The following arguments require argument keyword syntax (e.g. rc=rc). --
       integer,                 intent(out), optional :: rc
DESCRIPTION:

Returns .true. if the framework has been initialized. This means that ESMF_Initialize() has been called. Otherwise returns .false.. If an error occurs, i.e. rc /= ESMF_SUCCESS is returned, the return value of the function will also be .false..

The arguments are:

[rc]
Return code; equals ESMF_SUCCESS if there are no errors.

16.4.3 ESMF_IsFinalized - Query Finalized status of ESMF


INTERFACE:

     function ESMF_IsFinalized(rc)
RETURN VALUE:
       logical :: ESMF_IsFinalized
ARGUMENTS:
 -- The following arguments require argument keyword syntax (e.g. rc=rc). --
       integer,                 intent(out), optional :: rc
DESCRIPTION:

Returns .true. if the framework has been finalized. This means that ESMF_Finalize() has been called. Otherwise returns .false.. If an error occurs, i.e. rc /= ESMF_SUCCESS is returned, the return value of the function will also be .false..

The arguments are:

[rc]
Return code; equals ESMF_SUCCESS if there are no errors.

16.4.4 ESMF_Finalize - Clean up and shut down ESMF


INTERFACE:

       subroutine ESMF_Finalize(endflag, rc)
ARGUMENTS:
 -- The following arguments require argument keyword syntax (e.g. rc=rc). --
       type(ESMF_End_Flag), intent(in), optional  :: endflag
       integer,             intent(out), optional :: rc
STATUS:

DESCRIPTION:

This must be called once on each PET before the application exits to allow ESMF to flush buffers, close open connections, and release internal resources cleanly. The optional argument endflag may be used to indicate the mode of termination. Note that this call must be issued only once per PET with endflag=ESMF_END_NORMAL, and that this call may not be followed by ESMF_Initialize(). This last restriction means that it is not possible to restart ESMF within the same execution.

The arguments are:

[endflag]
Specify mode of termination. The default is ESMF_END_NORMAL which waits for all PETs of the global VM to reach ESMF_Finalize() before termination. See section 16.2.1 for a complete list and description of valid flags.
[rc]
Return code; equals ESMF_SUCCESS if there are no errors.

16.4.5 User-code SetServices method

Many programs call some library routines. The library documentation must explain what the routine name is, what arguments are required and what are optional, and what the code does.

In contrast, all ESMF components must be written to be called by another part of the program; in effect, an ESMF component takes the place of a library. The interface is prescribed by the framework, and the component writer must provide specific subroutines which have standard argument lists and perform specific operations. For technical reasons none of the arguments in user-provided subroutines must be declared as optional.

The only required public interface of a Component is its SetServices method. This subroutine must have an externally accessible name (be a public symbol), take a component as the first argument, and an integer return code as the second. Both arguments are required and must not be declared as optional. If an intent is specified in the interface it must be intent(inout) for the first and intent(out) for the second argument. The subroutine name is not predefined, it is set by the component writer, but must be provided as part of the component documentation.

The required function that the SetServices subroutine must provide is to specify the user-code entry points for the standard ESMF Component methods. To this end the user-written SetServices routine calls the

ESMF_<Grid/Cpl>CompSetEntryPoint() method to set each Component entry point.

See sections 17.2.1 and 18.2.1 for examples of how to write a user-code SetServices routine.

Note that a component does not call its own SetServices routine; the AppDriver or parent component code, which is creating a component, will first call ESMF_<Grid/Cpl>CompCreate() to create a component object, and then must call into ESMF_<Grid/Cpl>CompSetServices(), supplying the user-code SetServices routine as an argument. The framework then calls into the user-code SetServices, after the Component's VM has been started up.

It is good practice to package the user-code implementing a component into a Fortran module, with the user-code SetService routine being the only public module method. ESMF supports three mechanisms for accessing the user-code SetServices routine from the calling AppDriver or parent component.

16.4.6 User-code Initialize, Run, and Finalize methods

The required standard ESMF Component methods, for which user-code entry points must be set, are Initialize, Run, and Finalize. Currently optional, a Component may also set entry points for the WriteRestart and ReadRestart methods.

Sections 17.2.1 and 18.2.1 provide examples of how the entry points for Initialize, Run, and Finalize are set during the user-code SetServices routine, using the ESMF_<Grid/Cpl>CompSetEntryPoint() library call.

All standard user-code methods must abide exactly to the prescribed interfaces. None of the arguments must be declared as optional.

The names of the Initialize, Run, and Finalize user-code subroutines do not need to be public; in fact it is far better for them to be private to lower the chances of public symbol clashes between different components.

See sections 17.2.2, 17.2.3, 17.2.4, and 18.2.2, 18.2.3, 18.2.4 for examples of how to write entry points for the standard ESMF Component methods.


16.4.7 User-code SetVM method

When the AppDriver or parent component code calls ESMF_<Grid/Cpl>CompCreate() it has the option to specify a petList argument. All of the parent PETs contained in this list become resources of the child component. By default, without the petList argument, all of the parent PETs are provided to the child component.

Typically each component has its own virtual machine (VM) object. However, using the optional contextflag argument during ESMF_<Grid/Cpl>CompCreate() a child component can inherit its parent component's VM. Unless a child component inherits the parent VM, it has the option to set certain aspects of how its VM utilizes the provided resources. The resources provided via the parent PETs are the associated processing elements (PEs) and virtual address spaces (VASs).

The optional user-written SetVM routine is called from the parent for the child through the ESMF_<Grid/Cpl>CompSetVM() method. This is the only place where the child component can set aspects of its own VM before it is started up. The child component's VM must be running before the SetServices routine can be called, and thus the parent must call the optional ESMF_<Grid/Cpl>CompSetVM() method before ESMF_<Grid/Cpl>CompSetServices().

Inside the user-code called by the SetVM routine, the component has the option to specify how the PETs share the provided parent PEs. Further, PETs on the same single system image (SSI) can be set to run multi-threaded within a reduced number of virtual address spaces (VAS), allowing a component to leverage shared memory concepts.

Sections 17.2.5 and 18.2.5 provide examples for simple user-written SetVM routines.


16.4.8 Use of internal procedures as user-provided procedures

Internal procedures are nested within a surrounding procedure, and only local to the surrounding procedure. They are specified by using the CONTAINS statement.

Prior to Fortran-2008 an internal procedure could not be used as a user-provided callback procedure. In Fortran-2008 this restriction was lifted. It is important to note that if ESMF is passed an internal procedure, that the surrounding procedure be active whenever ESMF calls it. This helps ensure that local variables at the surrounding procedures scope are properly initialized.

When internal procedures contained within a main program unit are used for callbacks, there is no problem. This is because the main program unit is always active. However when internal procedures are used within other program units, initialization could become a problem. The following outlines the issue:

  module my_procs_mod
    use ESMF
    implicit none

  contains

    subroutine my_procs (...)
      integer :: my_setting
      :
      call ESMF_GridCompSetEntryPoint(gridcomp, methodflag=ESMF_METHOD_INITIALIZE, &
          userRoutine=my_grid_proc_init, rc=localrc)
      :
      my_setting = 42

    contains

      subroutine my_grid_proc_init (gridcomp, importState, exportState, clock, rc)
        :
      ! my_setting is possibly uninitialized when my_grid_proc_init is used as a call-back
        something = my_setting
        :
      end subroutine my_grid_proc_init
    end subroutine my_procs
  end module my_procs_mod

The Fortran standard does not specify whether variable my_setting is statically or automatically allocated, unless it is explicitly given the SAVE attribute. Thus there is no guarantee that its value will persist after my_procs has finished. The SAVE attribute is usually given to a variable via specifying a SAVE attribute in its delaration. However it can also be inferred by initializing the variable in its declaration:

      :
      integer, save : my_setting
      :

or,

      :
      integer :: my_setting = 42
      :

Because of the potential initialization issues, it is recommended that internal procedures only be used as ESMF callbacks when the surrounding procedure is also active.

17 GridComp Class

17.1 Description

In Earth system modeling, the most natural way to think about an ESMF Gridded Component, or ESMF_GridComp, is as a piece of code representing a particular physical domain, such as an atmospheric model or an ocean model. Gridded Components may also represent individual processes, such as radiation or chemistry. It's up to the application writer to decide how deeply to “componentize.”

Earth system software components tend to share a number of basic features. Most ingest and produce a variety of physical fields, refer to a (possibly noncontiguous) spatial region and a grid that is partitioned across a set of computational resources, and require a clock for things like stepping a governing set of PDEs forward in time. Most can also be divided into distinct initialize, run, and finalize computational phases. These common characteristics are used within ESMF to define a Gridded Component data structure that is tailored for Earth system modeling and yet is still flexible enough to represent a variety of domains.

A well designed Gridded Component does not store information internally about how it couples to other Gridded Components. That allows it to be used in different contexts without changes to source code. The idea here is to avoid situations in which slightly different versions of the same model source are maintained for use in different contexts - standalone vs. coupled versions, for example. Data is passed in and out of Gridded Components using an ESMF State, this is described in Section 21.1.

An ESMF Gridded Component has two parts, one which is user-written and another which is part of the framework. The user-written part is software that represents a physical domain or performs some other computational function. It forms the body of the Gridded Component. It may be a piece of legacy code, or it may be developed expressly for use with ESMF. It must contain routines with standard ESMF interfaces that can be called to initialize, run, and finalize the Gridded Component. These routines can have separate callable phases, such as distinct first and second initialization steps.

ESMF provides the Gridded Component derived type, ESMF_GridComp. An ESMF_GridComp must be created for every portion of the application that will be represented as a separate component. For example, in a climate model, there may be Gridded Components representing the land, ocean, sea ice, and atmosphere. If the application contains an ensemble of identical Gridded Components, every one has its own associated ESMF_GridComp. Each Gridded Component has its own name and is allocated a set of computational resources, in the form of an ESMF Virtual Machine, or VM.

The user-written part of a Gridded Component is associated with an ESMF_GridComp derived type through a routine called ESMF_SetServices(). This is a routine that the user must write, and declare public. Inside the SetServices routine the user must call ESMF_SetEntryPoint() methods that associate a standard ESMF operation with the name of the corresponding Fortran subroutine in their user code.

17.2 Use and Examples

A Gridded Component is a computational entity which consumes and produces data. It uses a State object to exchange data between itself and other Components. It uses a Clock object to manage time, and a VM to describe its own and its child components' computational resources.

This section shows how to create Gridded Components. For demonstrations of the use of Gridded Components, see the system tests that are bundled with the ESMF software distribution. These can be found in the directory esmf/src/system_tests.

17.2.1 Implement a user-code SetServices routine

Every ESMF_GridComp is required to provide and document a public set services routine. It can have any name, but must follow the declaration below: a subroutine which takes an ESMF_GridComp as the first argument, and an integer return code as the second. Both arguments are required and must not be declared as optional. If an intent is specified in the interface it must be intent(inout) for the first and intent(out) for the second argument.

The set services routine must call the ESMF method ESMF_GridCompSetEntryPoint() to register with the framework what user-code subroutines should be called to initialize, run, and finalize the component. There are additional routines which can be registered as well, for checkpoint and restart functions.

Note that the actual subroutines being registered do not have to be public to this module; only the set services routine itself must be available to be used by other code.

    ! Example Gridded Component
    module ESMF_GriddedCompEx
    
    ! ESMF Framework module
    use ESMF
    implicit none
    public GComp_SetServices
    public GComp_SetVM

    contains

    subroutine GComp_SetServices(comp, rc)
      type(ESMF_GridComp)   :: comp   ! must not be optional
      integer, intent(out)  :: rc     ! must not be optional

      ! Set the entry points for standard ESMF Component methods
      call ESMF_GridCompSetEntryPoint(comp, ESMF_METHOD_INITIALIZE, &
                                userRoutine=GComp_Init, rc=rc)
      call ESMF_GridCompSetEntryPoint(comp, ESMF_METHOD_RUN, &
                                userRoutine=GComp_Run, rc=rc)
      call ESMF_GridCompSetEntryPoint(comp, ESMF_METHOD_FINALIZE, &
                                userRoutine=GComp_Final, rc=rc)

      rc = ESMF_SUCCESS

    end subroutine

17.2.2 Implement a user-code Initialize routine

When a higher level component is ready to begin using an ESMF_GridComp, it will call its initialize routine.

The component writer must supply a subroutine with the exact interface shown below. Arguments must not be declared as optional, and the types and order must match.

At initialization time the component can allocate data space, open data files, set up initial conditions; anything it needs to do to prepare to run.

The rc return code should be set if an error occurs, otherwise the value ESMF_SUCCESS should be returned.

    subroutine GComp_Init(comp, importState, exportState, clock, rc)
      type(ESMF_GridComp)   :: comp                   ! must not be optional
      type(ESMF_State)      :: importState            ! must not be optional
      type(ESMF_State)      :: exportState            ! must not be optional
      type(ESMF_Clock)      :: clock                  ! must not be optional
      integer, intent(out)  :: rc                     ! must not be optional

      print *, "Gridded Comp Init starting"

      ! This is where the model specific setup code goes.  
 
      ! If the initial Export state needs to be filled, do it here.
      !call ESMF_StateAdd(exportState, field, rc)
      !call ESMF_StateAdd(exportState, bundle, rc)
      print *, "Gridded Comp Init returning"
   
      rc = ESMF_SUCCESS

    end subroutine GComp_Init

17.2.3 Implement a user-code Run routine

During the execution loop, the run routine may be called many times. Each time it should read data from the importState, use the clock to determine what the current time is in the calling component, compute new values or process the data, and produce any output and place it in the exportState.

When a higher level component is ready to use the ESMF_GridComp it will call its run routine.

The component writer must supply a subroutine with the exact interface shown below. Arguments must not be declared as optional, and the types and order must match.

It is expected that this is where the bulk of the model computation or data analysis will occur.

The rc return code should be set if an error occurs, otherwise the value ESMF_SUCCESS should be returned.

    subroutine GComp_Run(comp, importState, exportState, clock, rc)
      type(ESMF_GridComp)   :: comp                   ! must not be optional
      type(ESMF_State)      :: importState            ! must not be optional
      type(ESMF_State)      :: exportState            ! must not be optional
      type(ESMF_Clock)      :: clock                  ! must not be optional
      integer, intent(out)  :: rc                     ! must not be optional

      print *, "Gridded Comp Run starting"
      ! call ESMF_StateGet(), etc to get fields, bundles, arrays
      !  from import state.

      ! This is where the model specific computation goes.

      ! Fill export state here using ESMF_StateAdd(), etc

      print *, "Gridded Comp Run returning"

      rc = ESMF_SUCCESS

    end subroutine GComp_Run

17.2.4 Implement a user-code Finalize routine

At the end of application execution, each ESMF_GridComp should deallocate data space, close open files, and flush final results. These functions should be placed in a finalize routine.

The component writer must supply a subroutine with the exact interface shown below. Arguments must not be declared as optional, and the types and order must match.

The rc return code should be set if an error occurs, otherwise the value ESMF_SUCCESS should be returned.

    subroutine GComp_Final(comp, importState, exportState, clock, rc)
      type(ESMF_GridComp)   :: comp                   ! must not be optional
      type(ESMF_State)      :: importState            ! must not be optional
      type(ESMF_State)      :: exportState            ! must not be optional
      type(ESMF_Clock)      :: clock                  ! must not be optional
      integer, intent(out)  :: rc                     ! must not be optional

      print *, "Gridded Comp Final starting"
    
      ! Add whatever code here needed

      print *, "Gridded Comp Final returning"
   
      rc = ESMF_SUCCESS

    end subroutine GComp_Final

17.2.5 Implement a user-code SetVM routine

Every ESMF_GridComp can optionally provide and document a public set vm routine. It can have any name, but must follow the declaration below: a subroutine which takes an ESMF_GridComp as the first argument, and an integer return code as the second. Both arguments are required and must not be declared as optional. If an intent is specified in the interface it must be intent(inout) for the first and intent(out) for the second argument.

The set vm routine is the only place where the child component can use the ESMF_GridCompSetVMMaxPEs(), or ESMF_GridCompSetVMMaxThreads(), or ESMF_GridCompSetVMMinThreads() call to modify aspects of its own VM.

A component's VM is started up right before its set services routine is entered. ESMF_GridCompSetVM() is executing in the parent VM, and must be called before ESMF_GridCompSetServices().

    subroutine GComp_SetVM(comp, rc)
      type(ESMF_GridComp)   :: comp   ! must not be optional
      integer, intent(out)  :: rc     ! must not be optional
      
      type(ESMF_VM) :: vm
      logical :: pthreadsEnabled
      
      ! Test for Pthread support, all SetVM calls require it
      call ESMF_VMGetGlobal(vm, rc=rc)
      call ESMF_VMGet(vm, pthreadsEnabledFlag=pthreadsEnabled, rc=rc)

      if (pthreadsEnabled) then
        ! run PETs single-threaded
        call ESMF_GridCompSetVMMinThreads(comp, rc=rc)
      endif

      rc = ESMF_SUCCESS

    end subroutine

    end module ESMF_GriddedCompEx

17.2.6 Set and Get the Internal State

ESMF provides the concept of an Internal State that is associated with a Component. Through the Internal State API a user can attach a private data block to a Component, and later retrieve a pointer to this memory allocation. Setting and getting of Internal State information are supported from anywhere in the Component's SetServices, Initialize, Run, or Finalize code.

The code below demonstrates the basic Internal State API of ESMF_<Grid|Cpl>SetInternalState() and ESMF_<Grid|Cpl>GetInternalState(). Notice that an extra level of indirection to the user data is necessary!

  ! ESMF Framework module
  use ESMF
  use ESMF_TestMod
  implicit none
  
  type(ESMF_GridComp) :: comp
  integer :: rc, finalrc

  ! Internal State Variables
  type testData
  sequence
    integer :: testValue
    real    :: testScaling
  end type

  type dataWrapper
  sequence
    type(testData), pointer :: p
  end type

  type(dataWrapper) :: wrap1, wrap2
  type(testData), target :: data
  type(testData), pointer :: datap  ! extra level of indirection

!-------------------------------------------------------------------------
        
  call ESMF_Initialize(defaultlogfilename="InternalStateEx.Log", &
                    logkindflag=ESMF_LOGKIND_MULTI, rc=rc)
  if (rc /= ESMF_SUCCESS) call ESMF_Finalize(endflag=ESMF_END_ABORT)

!-------------------------------------------------------------------------

  !  Creation of a Component
  comp = ESMF_GridCompCreate(name="test", rc=rc)  
  if (rc .ne. ESMF_SUCCESS) finalrc = ESMF_FAILURE 

!-------------------------------------------------------------------------
! This could be called, for example, during a Component's initialize phase.

    ! Initialize private data block
  data%testValue = 4567
  data%testScaling = 0.5

  ! Set Internal State
  wrap1%p => data
  call ESMF_GridCompSetInternalState(comp, wrap1, rc)
  if (rc .ne. ESMF_SUCCESS) finalrc = ESMF_FAILURE 

!-------------------------------------------------------------------------
! This could be called, for example, during a Component's run phase.

  ! Get Internal State
  call ESMF_GridCompGetInternalState(comp, wrap2, rc)
  if (rc .ne. ESMF_SUCCESS) finalrc = ESMF_FAILURE 

  ! Access private data block and verify data
  datap => wrap2%p 
  if ((datap%testValue .ne. 4567) .or. (datap%testScaling .ne. 0.5)) then
    print *, "did not get same values back"
    finalrc = ESMF_FAILURE
  else
    print *, "got same values back from GetInternalState as original"
  endif

When working with ESMF Internal States it is important to consider the applying scoping rules. The user must ensure that the private data block that is being referenced persists for the entire access period. This is not an issue in the previous example, where the private data block was defined on the scope of the main program. However, the Internal State construct is often useful inside of Component modules to hold Component specific data between calls. One option to ensure persisting private data blocks is to use the Fortran SAVE attribute either on local or module variables. A second option, illustrated in the following example, is to use Fortran pointers and user controlled memory management via allocate() and deallocate() calls.

One situation where the Internal State is useful is in the creation of ensembles of the same Component. In this case it can be tricky to distinguish which data, held in saved module variables, belongs to which ensemble member - especially if the ensemble members are executing on the same set of PETs. The Internal State solves this problem by providing a handle to instance specific data allocations.

module user_mod

  use ESMF

  implicit none
  
  ! module variables
  private

  ! Internal State Variables
  type testData
  sequence
    integer       :: testValue        ! scalar data
    real          :: testScaling      ! scalar data
    real, pointer :: testArray(:)     ! array data
  end type

  type dataWrapper
  sequence
    type(testData), pointer :: p
  end type

  contains !--------------------------------------------------------------

  subroutine mygcomp_init(gcomp, istate, estate, clock, rc)
    type(ESMF_GridComp):: gcomp
    type(ESMF_State):: istate, estate
    type(ESMF_Clock):: clock
    integer, intent(out):: rc

    ! Local variables
    type(dataWrapper) :: wrap
    type(testData), pointer :: data
    integer :: i

    rc = ESMF_SUCCESS
    
    ! Allocate private data block
    allocate(data)

    ! Initialize private data block
    data%testValue = 4567         ! initialize scalar data
    data%testScaling = 0.5        ! initialize scalar data
    allocate(data%testArray(10))  ! allocate array data
    
    do i=1, 10
      data%testArray(i) = real(i) ! initialize array data
    enddo
    
    ! In a real ensemble application the initial data would be set to 
    ! something unique for this ensemble member. This could be 
    ! accomplished for example by reading a member specific config file 
    ! that was specified by the driver code. Alternatively, Attributes, 
    ! set by the driver, could be used to label the Component instances 
    ! as specific ensemble members.
    
    ! Set Internal State
    wrap%p => data
    call ESMF_GridCompSetInternalState(gcomp, wrap, rc)

  end subroutine !-------------------------------------------------------
  
  subroutine mygcomp_run(gcomp, istate, estate, clock, rc)
    type(ESMF_GridComp):: gcomp
    type(ESMF_State):: istate, estate
    type(ESMF_Clock):: clock
    integer, intent(out):: rc

    ! Local variables
    type(dataWrapper) :: wrap
    type(testData), pointer :: data
    logical :: match = .true.
    integer :: i
    
    rc = ESMF_SUCCESS

    ! Get Internal State
    call ESMF_GridCompGetInternalState(gcomp, wrap, rc)
    if (rc/=ESMF_SUCCESS) return

    ! Access private data block and verify data
    data => wrap%p 
    if (data%testValue .ne. 4567) match = .false.   ! test scalar data
    if (data%testScaling .ne. 0.5) match = .false.  ! test scalar data
    do i=1, 10
      if (data%testArray(i) .ne. real(i)) match = .false. ! test array data
    enddo
    
    if (match) then
      print *, "got same values back from GetInternalState as original"
    else
      print *, "did not get same values back"
      rc = ESMF_FAILURE
    endif
    
  end subroutine !-------------------------------------------------------

  subroutine mygcomp_final(gcomp, istate, estate, clock, rc)
    type(ESMF_GridComp):: gcomp
    type(ESMF_State):: istate, estate
    type(ESMF_Clock):: clock
    integer, intent(out):: rc

    ! Local variables
    type(dataWrapper) :: wrap
    type(testData), pointer :: data

    rc = ESMF_SUCCESS
    
    ! Get Internal State
    call ESMF_GridCompGetInternalState(gcomp, wrap, rc)
    if (rc/=ESMF_SUCCESS) return
    
    ! Deallocate private data block
    data => wrap%p 
    deallocate(data%testArray)  ! deallocate array data
    deallocate(data)
    
  end subroutine !--------------------------------------------------------------


end module

17.3 Restrictions and Future Work

  1. No optional arguments. User-written routines called by SetServices, and registered for Initialize, Run and Finalize, must not declare any of the arguments as optional.

  2. Namespace isolation. If possible, Gridded Components should attempt to make all data private, so public names do not interfere with data in other components.

  3. Single execution mode. It is not expected that a single Gridded Component be able to function in both sequential and concurrent modes, although Gridded Components of different types can be nested. For example, a concurrently called Gridded Component can contain several nested sequential Gridded Components.

17.4 Class API

17.4.1 ESMF_GridCompAssignment(=) - GridComp assignment


INTERFACE:

     interface assignment(=)
     gridcomp1 = gridcomp2
ARGUMENTS:
     type(ESMF_GridComp) :: gridcomp1
     type(ESMF_GridComp) :: gridcomp2
STATUS:

DESCRIPTION:

Assign gridcomp1 as an alias to the same ESMF GridComp object in memory as gridcomp2. If gridcomp2 is invalid, then gridcomp1 will be equally invalid after the assignment.

The arguments are:

gridcomp1
The ESMF_GridComp object on the left hand side of the assignment.
gridcomp2
The ESMF_GridComp object on the right hand side of the assignment.

17.4.2 ESMF_GridCompOperator(==) - GridComp equality operator


INTERFACE:

   interface operator(==)
     if (gridcomp1 == gridcomp2) then ... endif
               OR
     result = (gridcomp1 == gridcomp2)
RETURN VALUE:
     logical :: result
ARGUMENTS:
     type(ESMF_GridComp), intent(in) :: gridcomp1
     type(ESMF_GridComp), intent(in) :: gridcomp2
STATUS:

DESCRIPTION:

Test whether gridcomp1 and gridcomp2 are valid aliases to the same ESMF GridComp object in memory. For a more general comparison of two ESMF GridComps, going beyond the simple alias test, the ESMF_GridCompMatch() function (not yet implemented) must be used.

The arguments are:

gridcomp1
The ESMF_GridComp object on the left hand side of the equality operation.
gridcomp2
The ESMF_GridComp object on the right hand side of the equality operation.

17.4.3 ESMF_GridCompOperator(/=) - GridComp not equal operator


INTERFACE:

   interface operator(/=)
     if (gridcomp1 /= gridcomp2) then ... endif
               OR
     result = (gridcomp1 /= gridcomp2)
RETURN VALUE:
     logical :: result
ARGUMENTS:
     type(ESMF_GridComp), intent(in) :: gridcomp1
     type(ESMF_GridComp), intent(in) :: gridcomp2
STATUS:

DESCRIPTION:

Test whether gridcomp1 and gridcomp2 are not valid aliases to the same ESMF GridComp object in memory. For a more general comparison of two ESMF GridComps, going beyond the simple alias test, the ESMF_GridCompMatch() function (not yet implemented) must be used.

The arguments are:

gridcomp1
The ESMF_GridComp object on the left hand side of the non-equality operation.
gridcomp2
The ESMF_GridComp object on the right hand side of the non-equality operation.

17.4.4 ESMF_GridCompCreate - Create a GridComp


INTERFACE:

   recursive function ESMF_GridCompCreate(grid, gridList, &
     mesh, meshList, locstream, locstreamList, xgrid, xgridList, &
     config, configFile, clock, petList, contextflag, name, rc)
RETURN VALUE:
     type(ESMF_GridComp) :: ESMF_GridCompCreate
ARGUMENTS:
 -- The following arguments require argument keyword syntax (e.g. rc=rc). --
     type(ESMF_Grid),         intent(in),    optional :: grid
     type(ESMF_Grid),         intent(in),    optional :: gridList(:)
     type(ESMF_Mesh),         intent(in),    optional :: mesh
     type(ESMF_Mesh),         intent(in),    optional :: meshList(:)
     type(ESMF_LocStream),    intent(in),    optional :: locstream
     type(ESMF_LocStream),    intent(in),    optional :: locstreamList(:)
     type(ESMF_XGrid),        intent(in),    optional :: xgrid
     type(ESMF_XGrid),        intent(in),    optional :: xgridList(:)
     type(ESMF_Config),       intent(in),    optional :: config
     character(len=*),        intent(in),    optional :: configFile
     type(ESMF_Clock),        intent(in),    optional :: clock
     integer,                 intent(in),    optional :: petList(:)
     type(ESMF_Context_Flag), intent(in),    optional :: contextflag
     character(len=*),        intent(in),    optional :: name
     integer,                 intent(out),   optional :: rc
STATUS:

DESCRIPTION:

This interface creates an ESMF_GridComp object. By default, a separate VM context will be created for each component. This implies creating a new MPI communicator and allocating additional memory to manage the VM resources. When running on a large number of processors, creating a separate VM for each component could be both time and memory inefficient. If the application is sequential, i.e., each component is running on all the PETs of the global VM, it will be more efficient to use the global VM instead of creating a new one. This can be done by setting contextflag to ESMF_CONTEXT_PARENT_VM.

The return value is the new ESMF_GridComp.

The arguments are:

[grid]
Associate an ESMF_Grid object with the newly created component. This is simply a convenience feature for the user. The ESMF library code does not access the grid object. The grid argument is mutually exclusive with the gridList argument. If both arguments are provided, the routine will fail, and an error is returned in rc. By default, i.e. if neither grid nor gridList are provided, no ESMF_Grid objects are associated with the component.
[gridList]
Associate a list of ESMF_Grid objects with the newly created component. This is simply a convenience feature for the user. The ESMF library code does not access the gridList object. The gridList argument is mutually exclusive with the grid argument. If both arguments are provided, the routine will fail, and an error is returned in rc. By default, i.e. if neither grid nor gridList are provided, no ESMF_Grid objects are associated with the component.
[mesh]
Associate an ESMF_Mesh object with the newly created component. This is simply a convenience feature for the user. The ESMF library code does not access the mesh object. The mesh argument is mutually exclusive with the meshList argument. If both arguments are provided, the routine will fail, and an error is returned in rc. By default, i.e. if neither mesh nor meshList are provided, no ESMF_Mesh objects are associated with the component.
[meshList]
Associate a list of ESMF_Mesh objects with the newly created component. This is simply a convenience feature for the user. The ESMF library code does not access the meshList object. The meshList argument is mutually exclusive with the mesh argument. If both arguments are provided, the routine will fail, and an error is returned in rc. By default, i.e. if neither mesh nor meshList are provided, no ESMF_Mesh objects are associated with the component.
[locstream]
Associate an ESMF_LocStream object with the newly created component. This is simply a convenience feature for the user. The ESMF library code does not access the locstream object. The locstream argument is mutually exclusive with the locstreamList argument. If both arguments are provided, the routine will fail, and an error is returned in rc. By default, i.e. if neither locstream nor locstreamList are provided, no ESMF_LocStream objects are associated with the component.
[locstreamList]
Associate a list of ESMF_LocStream objects with the newly created component. This is simply a convenience feature for the user. The ESMF library code does not access the locstreamList object. The locstreamList argument is mutually exclusive with the locstream argument. If both arguments are provided, the routine will fail, and an error is returned in rc. By default, i.e. if neither locstream nor locstreamList are provided, no ESMF_LocStream objects are associated with the component.
[xgrid]
Associate an ESMF_XGrid object with the newly created component. This is simply a convenience feature for the user. The ESMF library code does not access the xgrid object. The xgrid argument is mutually exclusive with the xgridList argument. If both arguments are provided, the routine will fail, and an error is returned in rc. By default, i.e. if neither xgrid nor xgridList are provided, no ESMF_XGrid objects are associated with the component.
[xgridList]
Associate a list of ESMF_XGrid objects with the newly created component. This is simply a convenience feature for the user. The ESMF library code does not access the xgridList object. The xgridList argument is mutually exclusive with the xgrid argument. If both arguments are provided, the routine will fail, and an error is returned in rc. By default, i.e. if neither xgrid nor xgridList are provided, no ESMF_XGrid objects are associated with the component.
[config]
An already-created ESMF_Config object to be attached to the newly created component. If both config and configFile arguments are specified, config takes priority.
[configFile]
The filename of an ESMF_Config format file. If specified, a new ESMF_Config object is created and attached to the newly created component. The configFile file is opened and associated with the new config object. If both config and configFile arguments are specified, config takes priority.
[clock]
Component-specific ESMF_Clock. This clock is available to be queried and updated by the new ESMF_GridComp as it chooses. This should not be the parent component clock, which should be maintained and passed down to the initialize/run/finalize routines separately.
[petList]
List of parent PETs given to the created child component by the parent component. If petList is not specified all of the parent PETs will be given to the child component. The order of PETs in petList determines how the child local PETs refer back to the parent PETs.
[contextflag]
Specify the component's VM context. The default context is ESMF_CONTEXT_OWN_VM. See section 52.10 for a complete list of valid flags.
[name]
Name of the newly-created ESMF_GridComp. This name can be altered from within the ESMF_GridComp code once the initialization routine is called.
[rc]
Return code; equals ESMF_SUCCESS if there are no errors.

17.4.5 ESMF_GridCompDestroy - Release resources associated with a GridComp


INTERFACE:

   recursive subroutine ESMF_GridCompDestroy(gridcomp, &
     timeout, timeoutFlag, rc)
ARGUMENTS:
     type(ESMF_GridComp), intent(inout)          :: gridcomp
 -- The following arguments require argument keyword syntax (e.g. rc=rc). --
     integer,             intent(in),   optional :: timeout
     logical,             intent(out),  optional :: timeoutFlag
     integer,             intent(out),  optional :: rc
STATUS:

DESCRIPTION:

Destroys an ESMF_GridComp, releasing the resources associated with the object.

The arguments are:

gridcomp
Release all resources associated with this ESMF_GridComp and mark the object as invalid. It is an error to pass this object into any other routines after being destroyed.
[timeout]
The maximum period in seconds that this call will wait in communications with the actual component, before returning with a timeout condition. The default is 3600, i.e. 1 hour. The timeout argument is only supported for connected dual components.
[timeoutFlag]
Returns .true. if the timeout was reached, .false. otherwise. If timeoutFlag was not provided, a timeout condition will lead to a return code of rc \= ESMF_SUCCESS. Otherwise the return value of timeoutFlag is the sole indicator of a timeout condition.
[rc]
Return code; equals ESMF_SUCCESS if there are no errors.

17.4.6 ESMF_GridCompFinalize - Call the GridComp's finalize routine


INTERFACE:

   recursive subroutine ESMF_GridCompFinalize(gridcomp, &
     importState, exportState, clock, syncflag, phase, timeout, timeoutFlag, &
     userRc, rc)
ARGUMENTS:
     type(ESMF_GridComp),  intent(inout)           :: gridcomp
 -- The following arguments require argument keyword syntax (e.g. rc=rc). --
     type(ESMF_State),     intent(inout), optional :: importState
     type(ESMF_State),     intent(inout), optional :: exportState
     type(ESMF_Clock),     intent(inout), optional :: clock
     type(ESMF_Sync_Flag), intent(in),    optional :: syncflag
     integer,              intent(in),    optional :: phase
     integer,              intent(in),    optional :: timeout
     logical,              intent(out),   optional :: timeoutFlag
     integer,              intent(out),   optional :: userRc
     integer,              intent(out),   optional :: rc
STATUS:

DESCRIPTION:

Call the associated user-supplied finalization routine for an ESMF_GridComp.

The arguments are:

gridcomp
The ESMF_GridComp to call finalize routine for.
[importState]
ESMF_State containing import data. If not present, a dummy argument will be passed to the user-supplied routine. The importState argument in the user code cannot be optional.
[exportState]
ESMF_State containing export data. If not present, a dummy argument will be passed to the user-supplied routine. The exportState argument in the user code cannot be optional.
[clock]
External ESMF_Clock for passing in time information. This is generally the parent component's clock, and will be treated as read-only by the child component. The child component can maintain a private clock for its own internal time computations. If not present, a dummy argument will be passed to the user-supplied routine. The clock argument in the user code cannot be optional.
[syncflag]
Blocking behavior of this method call. See section 52.56 for a list of valid blocking options. Default option is ESMF_SYNC_VASBLOCKING which blocks PETs and their spawned off threads across each VAS but does not synchronize PETs that run in different VASs.
[phase]
Component providers must document whether each of their routines are single-phase or multi-phase. Single-phase routines require only one invocation to complete their work. Multi-phase routines provide multiple subroutines to accomplish the work, accommodating components which must complete part of their work, return to the caller and allow other processing to occur, and then continue the original operation. For multiple-phase child components, this is the integer phase number to be invoked. For single-phase child components this argument is optional. The default is 1.
[timeout]
The maximum period in seconds that this call will wait in communications with the actual component, before returning with a timeout condition. The default is 3600, i.e. 1 hour. The timeout argument is only supported for connected dual components.
[timeoutFlag]
Returns .true. if the timeout was reached, .false. otherwise. If timeoutFlag was not provided, a timeout condition will lead to a return code of rc \= ESMF_SUCCESS. Otherwise the return value of timeoutFlag is the sole indicator of a timeout condition.
[userRc]
Return code set by userRoutine before returning.
[rc]
Return code; equals ESMF_SUCCESS if there are no errors.

17.4.7 ESMF_GridCompGet - Get GridComp information


INTERFACE:

   recursive subroutine ESMF_GridCompGet(gridcomp, &
     gridIsPresent, grid, gridList, meshIsPresent, mesh, meshList, &
     locstreamIsPresent, locstream, locstreamList, xgridIsPresent, &
     xgrid, xgridList, importStateIsPresent, importState, &
     exportStateIsPresent, exportState, configIsPresent, config, &
     configFileIsPresent, configFile, clockIsPresent, clock, localPet, &
     petCount, contextflag, currentMethod, currentPhase, comptype, &
     vmIsPresent, vm, name, rc)
ARGUMENTS:
     type(ESMF_GridComp),           intent(in)            :: gridcomp
 -- The following arguments require argument keyword syntax (e.g. rc=rc). --
     logical,                       intent(out), optional :: gridIsPresent
     type(ESMF_Grid),               intent(out), optional :: grid
     type(ESMF_Grid), allocatable,  intent(out), optional :: gridList(:)
     logical,                       intent(out), optional :: meshIsPresent
     type(ESMF_Mesh),               intent(out), optional :: mesh
     type(ESMF_Mesh), allocatable,  intent(out), optional :: meshList(:)
     logical,                       intent(out), optional :: locstreamIsPresent
     type(ESMF_LocStream),          intent(out), optional :: locstream
     type(ESMF_LocStream), allocatable, intent(out), optional :: locstreamList(:)
     logical,                       intent(out), optional :: xgridIsPresent
     type(ESMF_XGrid),              intent(out), optional :: xgrid
     type(ESMF_XGrid), allocatable, intent(out), optional :: xgridList(:)
     logical,                       intent(out), optional :: importStateIsPresent
     type(ESMF_State),              intent(out), optional :: importState
     logical,                       intent(out), optional :: exportStateIsPresent
     type(ESMF_State),              intent(out), optional :: exportState
     logical,                       intent(out), optional :: configIsPresent
     type(ESMF_Config),             intent(out), optional :: config
     logical,                       intent(out), optional :: configFileIsPresent
     character(len=*),              intent(out), optional :: configFile
     logical,                       intent(out), optional :: clockIsPresent
     type(ESMF_Clock),              intent(out), optional :: clock
     integer,                       intent(out), optional :: localPet
     integer,                       intent(out), optional :: petCount
     type(ESMF_Context_Flag),       intent(out), optional :: contextflag
     type(ESMF_Method_Flag),        intent(out), optional :: currentMethod
     integer,                       intent(out), optional :: currentPhase
     type(ESMF_CompType_Flag),      intent(out), optional :: comptype
     logical,                       intent(out), optional :: vmIsPresent
     type(ESMF_VM),                 intent(out), optional :: vm
     character(len=*),              intent(out), optional :: name
     integer,                       intent(out), optional :: rc
STATUS:

DESCRIPTION:

Get information about an ESMF_GridComp object.

The arguments are:

gridcomp
The ESMF_GridComp object being queried.
[gridIsPresent]
Set to .true. if at least one ESMF_Grid object is associated with the gridcomp component. Set to .false. otherwise.
[grid]
Return the ESMF_Grid object associated with the gridcomp component. If multiple ESMF_Grid objects are associated, return the first in the list. It is an error to query for grid if no ESMF_Grid object is associated with the gridcomp component. If unsure, query for gridIsPresent first, or use the gridList variant.
[gridList]
Return a list of all ESMF_Grid objects associated with the gridcomp component. The size of the returned gridList corresponds to the number of ESMF_Grid objects associated. If no ESMF_Grid object is associated with the gridcomp component, the size of the returned gridList is zero.
[meshIsPresent]
Set to .true. if at least one ESMF_Mesh object is associated with the gridcomp component. Set to .false. otherwise.
[mesh]
Return the ESMF_Mesh object associated with the gridcomp component. If multiple ESMF_Mesh objects are associated, return the first in the list. It is an error to query for mesh if no ESMF_Mesh object is associated with the gridcomp component. If unsure, query for meshIsPresent first, or use the meshList variant.
[meshList]
Return a list of all ESMF_Mesh objects associated with the gridcomp component. The size of the returned meshList corresponds to the number of ESMF_Mesh objects associated. If no ESMF_Mesh object is associated with the gridcomp component, the size of the returned meshList is zero.
[locstreamIsPresent]
Set to .true. if at least one ESMF_LocStream object is associated with the gridcomp component. Set to .false. otherwise.
[locstream]
Return the ESMF_LocStream object associated with the gridcomp component. If multiple ESMF_LocStream objects are associated, return the first in the list. It is an error to query for locstream if no ESMF_Grid object is associated with the gridcomp component. If unsure, query for locstreamIsPresent first, or use the locstreamList variant.
[locstreamList]
Return a list of all ESMF_LocStream objects associated with the gridcomp component. The size of the returned locstreamList corresponds to the number of ESMF_LocStream objects associated. If no ESMF_LocStream object is associated with the gridcomp component, the size of the returned locstreamList is zero.
[xgridIsPresent]
Set to .true. if at least one ESMF_XGrid object is associated with the gridcomp component. Set to .false. otherwise.
[xgrid]
Return the ESMF_XGrid object associated with the gridcomp component. If multiple ESMF_XGrid objects are associated, return the first in the list. It is an error to query for xgrid if no ESMF_XGrid object is associated with the gridcomp component. If unsure, query for xgridIsPresent first, or use the xgridList variant.
[xgridList]
Return a list of all ESMF_XGrid objects associated with the gridcomp component. The size of the returned xgridList corresponds to the number of ESMF_XGrid objects associated. If no ESMF_XGrid object is associated with the gridcomp component, the size of the returned xgridList is zero.
[importStateIsPresent]
.true. if importState was set in GridComp object, .false. otherwise.
[importState]
Return the associated import State. It is an error to query for the import State if none is associated with the GridComp. If unsure, get importStateIsPresent first to determine the status.
[exportStateIsPresent]
.true. if exportState was set in GridComp object, .false. otherwise.
[exportState]
Return the associated export State. It is an error to query for the export State if none is associated with the GridComp. If unsure, get exportStateIsPresent first to determine the status.
[configIsPresent]
.true. if config was set in GridComp object, .false. otherwise.
[config]
Return the associated Config. It is an error to query for the Config if none is associated with the GridComp. If unsure, get configIsPresent first to determine the status.
[configFileIsPresent]
.true. if configFile was set in GridComp object, .false. otherwise.
[configFile]
Return the associated configuration filename. It is an error to query for the configuration filename if none is associated with the GridComp. If unsure, get configFileIsPresent first to determine the status.
[clockIsPresent]
.true. if clock was set in GridComp object, .false. otherwise.
[clock]
Return the associated Clock. It is an error to query for the Clock if none is associated with the GridComp. If unsure, get clockIsPresent first to determine the status.
[localPet]
Return the local PET id within the ESMF_GridComp object.
[petCount]
Return the number of PETs in the the ESMF_GridComp object.
[contextflag]
Return the ESMF_Context_Flag for this ESMF_GridComp. See section 52.10 for a complete list of valid flags.
[currentMethod]
Return the current ESMF_Method_Flag of the ESMF_GridComp execution. See section 52.41 for a complete list of valid options.
[currentPhase]
Return the current phase of the ESMF_GridComp execution.
[comptype]
Return the Component type. See section 52.9 for a complete list of valid flags.
[vmIsPresent]
.true. if vm was set in GridComp object, .false. otherwise.
[vm]
Return the associated VM. It is an error to query for the VM if none is associated with the GridComp. If unsure, get vmIsPresent first to determine the status.
[name]
Return the name of the ESMF_GridComp.
[rc]
Return code; equals ESMF_SUCCESS if there are no errors.

17.4.8 ESMF_GridCompGetInternalState - Get private data block pointer


INTERFACE:

   subroutine ESMF_GridCompGetInternalState(gridcomp, wrappedDataPointer, rc)
ARGUMENTS:
     type(ESMF_GridComp)             :: gridcomp
     type(wrapper)                   :: wrappedDataPointer
     integer,            intent(out) :: rc
STATUS:

DESCRIPTION:

Available to be called by an ESMF_GridComp at any time after ESMF_GridCompSetInternalState has been called. Since init, run, and finalize must be separate subroutines, data that they need to share in common can either be module global data, or can be allocated in a private data block and the address of that block can be registered with the framework and retrieved by this call. When running multiple instantiations of an ESMF_GridComp, for example during ensemble runs, it may be simpler to maintain private data specific to each run with private data blocks. A corresponding ESMF_GridCompSetInternalState call sets the data pointer to this block, and this call retrieves the data pointer. Note that the wrappedDataPointer argument needs to be a derived type which contains only a pointer of the type of the data block defined by the user. When making this call the pointer needs to be unassociated. When the call returns, the pointer will now reference the original data block which was set during the previous call to ESMF_GridCompSetInternalState.

Only the last data block set via ESMF_GridCompSetInternalState will be accessible.

CAUTION: This method does not have an explicit Fortran interface. Do not specify argument keywords when calling this method!

The arguments are:

gridcomp
An ESMF_GridComp object.
wrappedDataPointer
A derived type (wrapper), containing only an unassociated pointer to the private data block. The framework will fill in the pointer. When this call returns, the pointer is set to the same address set during the last ESMF_GridCompSetInternalState call. This level of indirection is needed to reliably set and retrieve the data block no matter which architecture or compiler is used.
rc
Return code; equals ESMF_SUCCESS if there are no errors. Note: unlike most other ESMF routines, this argument is not optional because of implementation considerations.

17.4.9 ESMF_GridCompInitialize - Call the GridComp's initialize routine


INTERFACE:

   recursive subroutine ESMF_GridCompInitialize(gridcomp, &
     importState, exportState, clock, syncflag, phase, timeout, timeoutFlag, &
     userRc, rc)
ARGUMENTS:
     type(ESMF_GridComp),  intent(inout)           :: gridcomp
 -- The following arguments require argument keyword syntax (e.g. rc=rc). --
     type(ESMF_State),     intent(inout), optional :: importState
     type(ESMF_State),     intent(inout), optional :: exportState
     type(ESMF_Clock),     intent(inout), optional :: clock
     type(ESMF_Sync_Flag), intent(in),    optional :: syncflag
     integer,              intent(in),    optional :: phase
     integer,              intent(in),    optional :: timeout
     logical,              intent(out),   optional :: timeoutFlag
     integer,              intent(out),   optional :: userRc
     integer,              intent(out),   optional :: rc
STATUS:

DESCRIPTION:

Call the associated user initialization routine for an ESMF_GridComp.

The arguments are:

gridcomp
ESMF_GridComp to call initialize routine for.
[importState]
ESMF_State containing import data for coupling. If not present, a dummy argument will be passed to the user-supplied routine. The importState argument in the user code cannot be optional.
[exportState]
ESMF_State containing export data for coupling. If not present, a dummy argument will be passed to the user-supplied routine. The exportState argument in the user code cannot be optional.
[clock]
External ESMF_Clock for passing in time information. This is generally the parent component's clock, and will be treated as read-only by the child component. The child component can maintain a private clock for its own internal time computations. If not present, a dummy argument will be passed to the user-supplied routine. The clock argument in the user code cannot be optional.
[syncflag]
Blocking behavior of this method call. See section 52.56 for a list of valid blocking options. Default option is ESMF_SYNC_VASBLOCKING which blocks PETs and their spawned off threads across each VAS but does not synchronize PETs that run in different VASs.
[phase]
Component providers must document whether each of their routines are single-phase or multi-phase. Single-phase routines require only one invocation to complete their work. Multi-phase routines provide multiple subroutines to accomplish the work, accommodating components which must complete part of their work, return to the caller and allow other processing to occur, and then continue the original operation. For multiple-phase child components, this is the integer phase number to be invoked. For single-phase child components this argument is optional. The default is 1.
[timeout]
The maximum period in seconds that this call will wait in communications with the actual component, before returning with a timeout condition. The default is 3600, i.e. 1 hour. The timeout argument is only supported for connected dual components.
[timeoutFlag]
Returns .true. if the timeout was reached, .false. otherwise. If timeoutFlag was not provided, a timeout condition will lead to a return code of rc \= ESMF_SUCCESS. Otherwise the return value of timeoutFlag is the sole indicator of a timeout condition.
[userRc]
Return code set by userRoutine before returning.
[rc]
Return code; equals ESMF_SUCCESS if there are no errors.

17.4.10 ESMF_GridCompIsCreated - Check whether a GridComp object has been created


INTERFACE:

   function ESMF_GridCompIsCreated(gridcomp, rc)
RETURN VALUE:
     logical :: ESMF_GridCompIsCreated
ARGUMENTS:
     type(ESMF_GridComp), intent(in)            :: gridcomp
 -- The following arguments require argument keyword syntax (e.g. rc=rc). --
     integer,             intent(out), optional :: rc
DESCRIPTION:

Return .true. if the gridcomp has been created. Otherwise return .false.. If an error occurs, i.e. rc /= ESMF_SUCCESS is returned, the return value of the function will also be .false..

The arguments are:

gridcomp
ESMF_GridComp queried.
[rc]
Return code; equals ESMF_SUCCESS if there are no errors.

17.4.11 ESMF_GridCompIsPetLocal - Inquire if this GridComp is to execute on the calling PET


INTERFACE:

   recursive function ESMF_GridCompIsPetLocal(gridcomp, rc)
RETURN VALUE:
     logical :: ESMF_GridCompIsPetLocal
ARGUMENTS:
     type(ESMF_GridComp), intent(in)            :: gridcomp
 -- The following arguments require argument keyword syntax (e.g. rc=rc). --
     integer,             intent(out), optional :: rc
STATUS:

DESCRIPTION:

Inquire if this ESMF_GridComp object is to execute on the calling PET.

The return value is .true. if the component is to execute on the calling PET, .false. otherwise.

The arguments are:

gridcomp
ESMF_GridComp queried.
[rc]
Return code; equals ESMF_SUCCESS if there are no errors.

17.4.12 ESMF_GridCompPrint - Print GridComp information


INTERFACE:

   subroutine ESMF_GridCompPrint(gridcomp, rc)
ARGUMENTS:
     type(ESMF_GridComp), intent(in)            :: gridcomp
 -- The following arguments require argument keyword syntax (e.g. rc=rc). --
     integer,             intent(out), optional :: rc
STATUS:

DESCRIPTION:

Prints information about an ESMF_GridComp to stdout.

The arguments are:

gridcomp
ESMF_GridComp to print.
[rc]
Return code; equals ESMF_SUCCESS if there are no errors.

17.4.13 ESMF_GridCompReadRestart - Call the GridComp's read restart routine


INTERFACE:

   recursive subroutine ESMF_GridCompReadRestart(gridcomp, &
     importState, exportState, clock, syncflag, phase, timeout, timeoutFlag, &
     userRc, rc)
ARGUMENTS:
     type(ESMF_GridComp),  intent(inout)           :: gridcomp
 -- The following arguments require argument keyword syntax (e.g. rc=rc). --
     type(ESMF_State),     intent(inout), optional :: importState
     type(ESMF_State),     intent(inout), optional :: exportState
     type(ESMF_Clock),     intent(inout), optional :: clock
     type(ESMF_Sync_Flag), intent(in),    optional :: syncflag
     integer,              intent(in),    optional :: phase
     integer,              intent(in),    optional :: timeout
     logical,              intent(out),   optional :: timeoutFlag
     integer,              intent(out),   optional :: userRc
     integer,              intent(out),   optional :: rc
STATUS:

DESCRIPTION:

Call the associated user read restart routine for an ESMF_GridComp.

The arguments are:

gridcomp
ESMF_GridComp to call run routine for.
[importState]
ESMF_State containing import data. If not present, a dummy argument will be passed to the user-supplied routine. The importState argument in the user code cannot be optional.
[exportState]
ESMF_State containing export data. If not present, a dummy argument will be passed to the user-supplied routine. The exportState argument in the user code cannot be optional.
[clock]
External ESMF_Clock for passing in time information. This is generally the parent component's clock, and will be treated as read-only by the child component. The child component can maintain a private clock for its own internal time computations. If not present, a dummy argument will be passed to the user-supplied routine. The clock argument in the user code cannot be optional.
[syncflag]
Blocking behavior of this method call. See section 52.56 for a list of valid blocking options. Default option is ESMF_SYNC_VASBLOCKING which blocks PETs and their spawned off threads across each VAS but does not synchronize PETs that run in different VASs.
[phase]
Component providers must document whether each of their routines are single-phase or multi-phase. Single-phase routines require only one invocation to complete their work. Multi-phase routines provide multiple subroutines to accomplish the work, accommodating components which must complete part of their work, return to the caller and allow other processing to occur, and then continue the original operation. For multiple-phase child components, this is the integer phase number to be invoked. For single-phase child components this argument is optional. The default is 1.
[timeout]
The maximum period in seconds that this call will wait in communications with the actual component, before returning with a timeout condition. The default is 3600, i.e. 1 hour. The timeout argument is only supported for connected dual components.
[timeoutFlag]
Returns .true. if the timeout was reached, .false. otherwise. If timeoutFlag was not provided, a timeout condition will lead to a return code of rc \= ESMF_SUCCESS. Otherwise the return value of timeoutFlag is the sole indicator of a timeout condition.
[userRc]
Return code set by userRoutine before returning.
[rc]
Return code; equals ESMF_SUCCESS if there are no errors.

17.4.14 ESMF_GridCompRun - Call the GridComp's run routine


INTERFACE:

   recursive subroutine ESMF_GridCompRun(gridcomp, &
     importState, exportState, clock, syncflag, phase, timeout, timeoutFlag, &
     userRc, rc)
ARGUMENTS:
     type(ESMF_GridComp),  intent(inout)           :: gridcomp
 -- The following arguments require argument keyword syntax (e.g. rc=rc). --
     type(ESMF_State),     intent(inout), optional :: importState
     type(ESMF_State),     intent(inout), optional :: exportState
     type(ESMF_Clock),     intent(inout), optional :: clock
     type(ESMF_Sync_Flag), intent(in),    optional :: syncflag
     integer,              intent(in),    optional :: phase
     integer,              intent(in),    optional :: timeout
     logical,              intent(out),   optional :: timeoutFlag
     integer,              intent(out),   optional :: userRc
     integer,              intent(out),   optional :: rc
STATUS:

DESCRIPTION:

Call the associated user run routine for an ESMF_GridComp.

The arguments are:

gridcomp
ESMF_GridComp to call run routine for.
[importState]
ESMF_State containing import data. If not present, a dummy argument will be passed to the user-supplied routine. The importState argument in the user code cannot be optional.
[exportState]
ESMF_State containing export data. If not present, a dummy argument will be passed to the user-supplied routine. The exportState argument in the user code cannot be optional.
[clock]
External ESMF_Clock for passing in time information. This is generally the parent component's clock, and will be treated as read-only by the child component. The child component can maintain a private clock for its own internal time computations. If not present, a dummy argument will be passed to the user-supplied routine. The clock argument in the user code cannot be optional.
[syncflag]
Blocking behavior of this method call. See section 52.56 for a list of valid blocking options. Default option is ESMF_SYNC_VASBLOCKING which blocks PETs and their spawned off threads across each VAS but does not synchronize PETs that run in different VASs.
[phase]
Component providers must document whether each of their routines are single-phase or multi-phase. Single-phase routines require only one invocation to complete their work. Multi-phase routines provide multiple subroutines to accomplish the work, accommodating components which must complete part of their work, return to the caller and allow other processing to occur, and then continue the original operation. For multiple-phase child components, this is the integer phase number to be invoked. For single-phase child components this argument is optional. The default is 1.
[timeout]
The maximum period in seconds that this call will wait in communications with the actual component, before returning with a timeout condition. The default is 3600, i.e. 1 hour. The timeout argument is only supported for connected dual components.
[timeoutFlag]
Returns .true. if the timeout was reached, .false. otherwise. If timeoutFlag was not provided, a timeout condition will lead to a return code of rc \= ESMF_SUCCESS. Otherwise the return value of timeoutFlag is the sole indicator of a timeout condition.
[userRc]
Return code set by userRoutine before returning.
[rc]
Return code; equals ESMF_SUCCESS if there are no errors.

17.4.15 ESMF_GridCompServiceLoop - Call the GridComp's service loop routine


INTERFACE:

   recursive subroutine ESMF_GridCompServiceLoop(gridcomp, &
     importState, exportState, clock, syncflag, port, timeout, timeoutFlag, rc)
ARGUMENTS:
     type(ESMF_GridComp),  intent(inout)           :: gridcomp
 -- The following arguments require argument keyword syntax (e.g. rc=rc). --
     type(ESMF_State),     intent(inout), optional :: importState
     type(ESMF_State),     intent(inout), optional :: exportState
     type(ESMF_Clock),     intent(inout), optional :: clock
     type(ESMF_Sync_Flag), intent(in),    optional :: syncflag
     integer,              intent(in),    optional :: port
     integer,              intent(in),    optional :: timeout
     logical,              intent(out),   optional :: timeoutFlag
     integer,              intent(out),   optional :: rc
DESCRIPTION:

Call the ServiceLoop routine for an ESMF_GridComp. This tries to establish a "component tunnel" between the actual Component (calling this routine) and a dual Component connecting to it through a matching SetServices call.

The arguments are:

gridcomp
ESMF_GridComp to call service loop routine for.
[importState]
ESMF_State containing import data for coupling. If not present, a dummy argument will be passed to the user-supplied routine. The importState argument in the user code cannot be optional.
[exportState]
ESMF_State containing export data for coupling. If not present, a dummy argument will be passed to the user-supplied routine. The exportState argument in the user code cannot be optional.
[clock]
External ESMF_Clock for passing in time information. This is generally the parent component's clock, and will be treated as read-only by the child component. The child component can maintain a private clock for its own internal time computations. If not present, a dummy argument will be passed to the user-supplied routine. The clock argument in the user code cannot be optional.
[syncflag]
Blocking behavior of this method call. See section 52.56 for a list of valid blocking options. Default option is ESMF_SYNC_VASBLOCKING which blocks PETs and their spawned off threads across each VAS but does not synchronize PETs that run in different VASs.
[port]
In case a port number is provided, the "component tunnel" is established using sockets. The actual component side, i.e. the side that calls into ESMF_GridCompServiceLoop(), starts to listen on the specified port as the server. The valid port range is [1024, 65535]. In case the port argument is not specified, the "component tunnel" is established within the same executable using local communication methods (e.g. MPI).
[timeout]
The maximum period in seconds that this call will wait for communications with the dual component, before returning with a timeout condition. The default is 3600, i.e. 1 hour. (NOTE: Currently this option is only available for socket based component tunnels.)
[timeoutFlag]
Returns .true. if the timeout was reached, .false. otherwise. If timeoutFlag was not provided, a timeout condition will lead to a return code of rc \= ESMF_SUCCESS. Otherwise the return value of timeoutFlag is the sole indicator of a timeout condition.
[rc]
Return code; equals ESMF_SUCCESS if there are no errors.

17.4.16 ESMF_GridCompSet - Set or reset information about the GridComp


INTERFACE:

   subroutine ESMF_GridCompSet(gridcomp, grid, gridList, &
     mesh, meshList, locstream, locstreamList, xgrid, xgridList, &
     config, configFile, clock, name, rc)
ARGUMENTS:
     type(ESMF_GridComp),    intent(inout)         :: gridcomp
 -- The following arguments require argument keyword syntax (e.g. rc=rc). --
     type(ESMF_Grid),        intent(in),  optional :: grid
     type(ESMF_Grid),        intent(in),  optional :: gridList(:)
     type(ESMF_Mesh),        intent(in),  optional :: mesh
     type(ESMF_Mesh),        intent(in),  optional :: meshList(:)
     type(ESMF_LocStream),   intent(in),  optional :: locstream
     type(ESMF_LocStream),   intent(in),  optional :: locstreamList(:)
     type(ESMF_XGrid),       intent(in),  optional :: xgrid
     type(ESMF_XGrid),       intent(in),  optional :: xgridList(:)
     type(ESMF_Config),      intent(in),  optional :: config
     character(len=*),       intent(in),  optional :: configFile
     type(ESMF_Clock),       intent(in),  optional :: clock
     character(len=*),       intent(in),  optional :: name
     integer,                intent(out), optional :: rc
STATUS:

DESCRIPTION:

Sets or resets information about an ESMF_GridComp.

The arguments are:

gridcomp
ESMF_GridComp to change.
[grid]
Associate an ESMF_Grid object with the gridcomp component. This is simply a convenience feature for the user. The ESMF library code does not access the grid object. The grid argument is mutually exclusive with the gridList argument. If both arguments are provided, the routine will fail, and an error is returned in rc. By default, i.e. if neither grid nor gridList are provided, the ESMF_Grid association of the incoming gridcomp component remains unchanged.
[gridList]
Associate a list of ESMF_Grid objects with the gridcomp component. This is simply a convenience feature for the user. The ESMF library code does not access the gridList object. The gridList argument is mutually exclusive with the grid argument. If both arguments are provided, the routine will fail, and an error is returned in rc. By default, i.e. if neither grid nor gridList are provided, the ESMF_Grid association of the incoming gridcomp component remains unchanged.
[mesh]
Associate an ESMF_Mesh object with the gridcomp component. This is simply a convenience feature for the user. The ESMF library code does not access the mesh object. The mesh argument is mutually exclusive with the meshList argument. If both arguments are provided, the routine will fail, and an error is returned in rc. By default, i.e. if neither mesh nor meshList are provided, the ESMF_Mesh association of the incoming gridcomp component remains unchanged.
[meshList]
Associate a list of ESMF_Mesh objects with the gridcomp component. This is simply a convenience feature for the user. The ESMF library code does not access the meshList object. The meshList argument is mutually exclusive with the mesh argument. If both arguments are provided, the routine will fail, and an error is returned in rc. By default, i.e. if neither mesh nor meshList are provided, the ESMF_Mesh association of the incoming gridcomp component remains unchanged.
[locstream]
Associate an ESMF_LocStream object with the gridcomp component. This is simply a convenience feature for the user. The ESMF library code does not access the locstream object. The locstream argument is mutually exclusive with the locstreamList argument. If both arguments are provided, the routine will fail, and an error is returned in rc. By default, i.e. if neither locstream nor locstreamList are provided, the ESMF_LocStream association of the incoming gridcomp component remains unchanged.
[locstreamList]
Associate a list of ESMF_LocStream objects with the gridcomp component. This is simply a convenience feature for the user. The ESMF library code does not access the locstreamList object. The locstreamList argument is mutually exclusive with the locstream argument. If both arguments are provided, the routine will fail, and an error is returned in rc. By default, i.e. if neither locstream nor locstreamList are provided, the ESMF_LocStream association of the incoming gridcomp component remains unchanged.
[xgrid]
Associate an ESMF_XGrid object with the gridcomp component. This is simply a convenience feature for the user. The ESMF library code does not access the xgrid object. The xgrid argument is mutually exclusive with the xgridList argument. If both arguments are provided, the routine will fail, and an error is returned in rc. By default, i.e. if neither xgrid nor xgridList are provided, the ESMF_XGrid association of the incoming gridcomp component remains unchanged.
[xgridList]
Associate a list of ESMF_XGrid objects with the gridcomp component. This is simply a convenience feature for the user. The ESMF library code does not access the xgridList object. The xgridList argument is mutually exclusive with the xgrid argument. If both arguments are provided, the routine will fail, and an error is returned in rc. By default, i.e. if neither xgrid nor xgridList are provided, the ESMF_XGrid association of the incoming gridcomp component remains unchanged.
[config]
An already-created ESMF_Config object to be attached to the component. If both config and configFile arguments are specified, config takes priority.
[configFile]
The filename of an ESMF_Config format file. If specified, a new ESMF_Config object is created and attached to the component. The configFile file is opened and associated with the new config object. If both config and configFile arguments are specified, config takes priority.
[clock]
Set the private clock for this ESMF_GridComp.
[name]
Set the name of the ESMF_GridComp.
[rc]
Return code; equals ESMF_SUCCESS if there are no errors.

17.4.17 ESMF_GridCompSetEntryPoint - Set user routine as entry point for standard GridComp method


INTERFACE:

   recursive subroutine ESMF_GridCompSetEntryPoint(gridcomp, methodflag, &
     userRoutine, phase, rc)
ARGUMENTS:
     type(ESMF_GridComp),    intent(inout)         :: gridcomp
     type(ESMF_Method_Flag), intent(in)            :: methodflag
     interface
       subroutine userRoutine(gridcomp, importState, exportState, clock, rc)
         use ESMF_CompMod
         use ESMF_StateMod
         use ESMF_ClockMod
         implicit none
         type(ESMF_GridComp)         :: gridcomp     ! must not be optional
         type(ESMF_State)            :: importState  ! must not be optional
         type(ESMF_State)            :: exportState  ! must not be optional
         type(ESMF_Clock)            :: clock        ! must not be optional
         integer, intent(out)        :: rc           ! must not be optional
       end subroutine
     end interface
 -- The following arguments require argument keyword syntax (e.g. rc=rc). --
     integer,                intent(in),  optional :: phase
     integer,                intent(out), optional :: rc
STATUS:

DESCRIPTION:

Registers a user-supplied userRoutine as the entry point for one of the predefined Component methodflags. After this call the userRoutine becomes accessible via the standard Component method API.

The arguments are:

gridcomp
An ESMF_GridComp object.
methodflag
One of a set of predefined Component methods - e.g. ESMF_METHOD_INITIALIZE, ESMF_METHOD_RUN, ESMF_METHOD_FINALIZE. See section 52.41 for a complete list of valid method options.
userRoutine
The user-supplied subroutine to be associated for this Component method. Argument types, intent and order must match the interface signature, and must not have the optional attribute. Prior to Fortran-2008, the subroutine must be either a module scope procedure, or an external procedure that has a matching interface block specified for it. An internal procedure which is contained within another procedure must not be used. From Fortran-2008 onwards, an internal procedure contained within either a main program or a module procedure may be used. If the internal procedure is contained within a module procedure, it is subject to initialization requirements. See: 16.4.8
[phase]
The phase number for multi-phase methods. For single phase methods the phase argument can be omitted. The default setting is 1.
[rc]
Return code; equals ESMF_SUCCESS if there are no errors.

17.4.18 ESMF_GridCompSetInternalState - Set private data block pointer


INTERFACE:

   subroutine ESMF_GridCompSetInternalState(gridcomp, wrappedDataPointer, rc)
ARGUMENTS:
     type(ESMF_GridComp)             :: gridcomp
     type(wrapper)                   :: wrappedDataPointer
     integer,            intent(out) :: rc
STATUS:

DESCRIPTION:

Available to be called by an ESMF_GridComp at any time, but expected to be most useful when called during the registration process, or initialization. Since init, run, and finalize must be separate subroutines, data that they need to share in common can either be module global data, or can be allocated in a private data block and the address of that block can be registered with the framework and retrieved by subsequent calls. When running multiple instantiations of an ESMF_GridComp, for example during ensemble runs, it may be simpler to maintain private data specific to each run with private data blocks. A corresponding ESMF_GridCompGetInternalState call retrieves the data pointer.

Only the last data block set via ESMF_GridCompSetInternalState will be accessible.

CAUTION: This method does not have an explicit Fortran interface. Do not specify argument keywords when calling this method!

The arguments are:

gridcomp
An ESMF_GridComp object.
wrappedDataPointer
A pointer to the private data block, wrapped in a derived type which contains only a pointer to the block. This level of indirection is needed to reliably set and retrieve the data block no matter which architecture or compiler is used.
rc
Return code; equals ESMF_SUCCESS if there are no errors. Note: unlike most other ESMF routines, this argument is not optional because of implementation considerations.

17.4.19 ESMF_GridCompSetServices - Call user routine to register GridComp methods


INTERFACE:

   recursive subroutine ESMF_GridCompSetServices(gridcomp, &
     userRoutine, userRc, rc)
ARGUMENTS:
     type(ESMF_GridComp), intent(inout)         :: gridcomp
     interface
       subroutine userRoutine(gridcomp, rc)
         use ESMF_CompMod
         implicit none
         type(ESMF_GridComp)        :: gridcomp ! must not be optional
         integer, intent(out)       :: rc       ! must not be optional
       end subroutine
     end interface
 -- The following arguments require argument keyword syntax (e.g. rc=rc). --
     integer,             intent(out), optional :: userRc
     integer,             intent(out), optional :: rc
STATUS:

DESCRIPTION:

Call into user provided userRoutine which is responsible for setting Component's Initialize(), Run(), and Finalize() services.

The arguments are:

gridcomp
Gridded Component.
userRoutine
The Component writer must supply a subroutine with the exact interface shown above for the userRoutine argument. Arguments in userRoutine must not be declared as optional, and the types, intent and order must match. Prior to Fortran-2008, the subroutine must be either a module scope procedure, or an external procedure that has a matching interface block specified for it. An internal procedure which is contained within another procedure must not be used. From Fortran-2008 onwards, an internal procedure contained within either a main program or a module procedure may be used. If the internal procedure is contained within a module procedure, it is subject to initialization requirements. See: 16.4.8

The userRoutine, when called by the framework, must make successive calls to ESMF_GridCompSetEntryPoint() to preset callback routines for standard Component Initialize(), Run(), and Finalize() methods.

[userRc]
Return code set by userRoutine before returning.
[rc]
Return code; equals ESMF_SUCCESS if there are no errors.

17.4.20 ESMF_GridCompSetServices - Call user routine through name lookup, to register GridComp methods


INTERFACE:

   ! Private name; call using ESMF_GridCompSetServices()
   recursive subroutine ESMF_GridCompSetServicesShObj(gridcomp, userRoutine, &
     sharedObj, userRoutineFound, userRc, rc)
ARGUMENTS:
     type(ESMF_GridComp), intent(inout)         :: gridcomp
     character(len=*),    intent(in)            :: userRoutine
 -- The following arguments require argument keyword syntax (e.g. rc=rc). --
     character(len=*),    intent(in),  optional :: sharedObj
     logical,             intent(out), optional :: userRoutineFound
     integer,             intent(out), optional :: userRc
     integer,             intent(out), optional :: rc
STATUS:

DESCRIPTION:

Call into a user provided routine which is responsible for setting Component's Initialize(), Run(), and Finalize() services. The named userRoutine must exist in the executable, or in the shared object specified by sharedObj. In the latter case all of the platform specific details about dynamic linking and loading apply.

The arguments are:

gridcomp
Gridded Component.
userRoutine
Name of routine to be called, specified as a character string. The Component writer must supply a subroutine with the exact interface shown for userRoutine below. Arguments must not be declared as optional, and the types, intent and order must match. Prior to Fortran-2008, the subroutine must be either a module scope procedure, or an external procedure that has a matching interface block specified for it. An internal procedure which is contained within another procedure must not be used. From Fortran-2008 onwards, an internal procedure contained within either a main program or a module procedure may be used. If the internal procedure is contained within a module procedure, it is subject to initialization requirements. See: 16.4.8


INTERFACE:

       interface
         subroutine userRoutine(gridcomp, rc)
           type(ESMF_GridComp)  :: gridcomp   ! must not be optional
           integer, intent(out) :: rc         ! must not be optional
         end subroutine
       end interface
DESCRIPTION:

The userRoutine, when called by the framework, must make successive calls to ESMF_GridCompSetEntryPoint() to preset callback routines for standard Component Initialize(), Run(), and Finalize() methods.

[sharedObj]
Name of shared object that contains userRoutine. If the sharedObj argument is not provided the executable itself will be searched for userRoutine.
[userRoutineFound]
Report back whether the specified userRoutine was found and executed, or was not available. If this argument is present, not finding the userRoutine will not result in returning an error in rc. The default is to return an error if the userRoutine cannot be found.
[userRc]
Return code set by userRoutine before returning.
[rc]
Return code; equals ESMF_SUCCESS if there are no errors.

17.4.21 ESMF_GridCompSetServices - Set to serve as Dual Component for an Actual Component


INTERFACE:

   ! Private name; call using ESMF_GridCompSetServices()
   recursive subroutine ESMF_GridCompSetServicesComp(gridcomp, &
     actualGridcomp, rc)
ARGUMENTS:
     type(ESMF_GridComp), intent(inout)         :: gridcomp
     type(ESMF_GridComp), intent(in)            :: actualGridcomp
 -- The following arguments require argument keyword syntax (e.g. rc=rc). --
     integer,             intent(out), optional :: rc
DESCRIPTION:

Set the services of a Gridded Component to serve a "dual" Component for an "actual" Component. The component tunnel is VM based.

The arguments are:

gridcomp
Dual Gridded Component.
actualGridcomp
Actual Gridded Component.
[rc]
Return code; equals ESMF_SUCCESS if there are no errors.

17.4.22 ESMF_GridCompSetServices - Set to serve as Dual Component for an Actual Component through sockets


INTERFACE:

   ! Private name; call using ESMF_GridCompSetServices()
   recursive subroutine ESMF_GridCompSetServicesSock(gridcomp, port, &
     server, timeout, timeoutFlag, rc)
ARGUMENTS:
     type(ESMF_GridComp), intent(inout)         :: gridcomp
     integer,             intent(in)            :: port
 -- The following arguments require argument keyword syntax (e.g. rc=rc). --
     character(len=*),    intent(in),  optional :: server
     integer,             intent(in),  optional :: timeout
     logical,             intent(out), optional :: timeoutFlag
     integer,             intent(out), optional :: rc
DESCRIPTION:

Set the services of a Gridded Component to serve a "dual" Component for an "actual" Component. The component tunnel is socket based.

The arguments are:

gridcomp
Dual Gridded Component.
port
Port number under which the actual component is being served. The valid port range is [1024, 65535].
[server]
Server name where the actual component is being served. The default, i.e. if the server argument was not provided, is localhost.
[timeout]
The maximum period in seconds that this call will wait in communications with the actual component, before returning with a timeout condition. The default is 3600, i.e. 1 hour.
[timeoutFlag]
Returns .true. if the timeout was reached, .false. otherwise. If timeoutFlag was not provided, a timeout condition will lead to a return code of rc \= ESMF_SUCCESS. Otherwise the return value of timeoutFlag is the sole indicator of a timeout condition.
[rc]
Return code; equals ESMF_SUCCESS if there are no errors.

17.4.23 ESMF_GridCompSetVM - Call user routine to set GridComp VM properties


INTERFACE:

   recursive subroutine ESMF_GridCompSetVM(gridcomp, userRoutine, &
     userRc, rc)
ARGUMENTS:
     type(ESMF_GridComp), intent(inout)         :: gridcomp
     interface
       subroutine userRoutine(gridcomp, rc)
         use ESMF_CompMod
         implicit none
         type(ESMF_GridComp)        :: gridcomp ! must not be optional
         integer, intent(out)       :: rc       ! must not be optional
       end subroutine
     end interface
 -- The following arguments require argument keyword syntax (e.g. rc=rc). --
     integer,             intent(out), optional :: userRc
     integer,             intent(out), optional :: rc
STATUS:

DESCRIPTION:

Optionally call into user provided userRoutine which is responsible for setting Component's VM properties.

The arguments are:

gridcomp
Gridded Component.
userRoutine
The Component writer must supply a subroutine with the exact interface shown above for the userRoutine argument. Arguments in userRoutine must not be declared as optional, and the types, intent and order must match. Prior to Fortran-2008, the subroutine must be either a module scope procedure, or an external procedure that has a matching interface block specified for it. An internal procedure which is contained within another procedure must not be used. From Fortran-2008 onwards, an internal procedure contained within either a main program or a module procedure may be used. If the internal procedure is contained within a module procedure, it is subject to initialization requirements. See: 16.4.8

The subroutine, when called by the framework, is expected to use any of the ESMF_GridCompSetVMxxx() methods to set the properties of the VM associated with the Gridded Component.

[userRc]
Return code set by userRoutine before returning.
[rc]
Return code; equals ESMF_SUCCESS if there are no errors.

17.4.24 ESMF_GridCompSetVM - Call user routine through name lookup, to set GridComp VM properties


INTERFACE:

   ! Private name; call using ESMF_GridCompSetVM()
   recursive subroutine ESMF_GridCompSetVMShObj(gridcomp, userRoutine, &
     sharedObj, userRc, rc)
ARGUMENTS:
     type(ESMF_GridComp), intent(inout)         :: gridcomp
     character(len=*),    intent(in)            :: userRoutine
 -- The following arguments require argument keyword syntax (e.g. rc=rc). --
     character(len=*),    intent(in),  optional :: sharedObj
     integer,             intent(out), optional :: userRc
     integer,             intent(out), optional :: rc
STATUS:

DESCRIPTION:

Optionally call into user provided userRoutine which is responsible for setting Component's VM properties. The named userRoutine must exist in the executable, or in the shared object specified by sharedObj. In the latter case all of the platform specific details about dynamic linking and loading apply.

The arguments are:

gridcomp
Gridded Component.
userRoutine
Routine to be called, specified as a character string. The Component writer must supply a subroutine with the exact interface shown for userRoutine below. Arguments must not be declared as optional, and the types, intent and order must match. Prior to Fortran-2008, the subroutine must be either a module scope procedure, or an external procedure that has a matching interface block specified for it. An internal procedure which is contained within another procedure must not be used. From Fortran-2008 onwards, an internal procedure contained within either a main program or a module procedure may be used. If the internal procedure is contained within a module procedure, it is subject to initialization requirements. See: 16.4.8


INTERFACE:

       interface
         subroutine userRoutine(gridcomp, rc)
           type(ESMF_GridComp)  :: gridcomp    ! must not be optional
           integer, intent(out) :: rc          ! must not be optional
         end subroutine
       end interface
DESCRIPTION:

The subroutine, when called by the framework, is expected to use any of the ESMF_GridCompSetVMxxx() methods to set the properties of the VM associated with the Gridded Component.

[sharedObj]
Name of shared object that contains userRoutine. If the sharedObj argument is not provided the executable itself will be searched for userRoutine.
[userRc]
Return code set by userRoutine before returning.
[rc]
Return code; equals ESMF_SUCCESS if there are no errors.

17.4.25 ESMF_GridCompSetVMMaxPEs - Associate PEs with PETs in GridComp VM


INTERFACE:

   subroutine ESMF_GridCompSetVMMaxPEs(gridcomp, &
     maxPeCountPerPet, prefIntraProcess, prefIntraSsi, prefInterSsi, rc)
ARGUMENTS:
     type(ESMF_GridComp), intent(inout)         :: gridcomp
 -- The following arguments require argument keyword syntax (e.g. rc=rc). --
     integer,             intent(in),  optional :: maxPeCountPerPet
     integer,             intent(in),  optional :: prefIntraProcess
     integer,             intent(in),  optional :: prefIntraSsi
     integer,             intent(in),  optional :: prefInterSsi
     integer,             intent(out), optional :: rc
DESCRIPTION:

Set characteristics of the ESMF_VM for this ESMF_GridComp. Attempts to associate up to maxPeCountPerPet PEs with each PET. Only PEs that are located on the same single system image (SSI) can be associated with the same PET. Within this constraint the call tries to get as close as possible to the number specified by maxPeCountPerPet.

The other constraint to this call is that the number of PEs is preserved. This means that the child Component in the end is associated with as many PEs as the parent Component provided to the child. The number of child PETs however is adjusted according to the above rule.

The typical use of ESMF_GridCompSetVMMaxPEs() is to allocate multiple PEs per PET in a Component for user-level threading, e.g. OpenMP.

The arguments are:

gridcomp
ESMF_GridComp to set the ESMF_VM for.
[maxPeCountPerPet]
Maximum number of PEs on each PET. Default for each SSI is the local number of PEs.
[prefIntraProcess]
Communication preference within a single process. Currently options not documented. Use default.
[prefIntraSsi]
Communication preference within a single system image (SSI). Currently options not documented. Use default.
[prefInterSsi]
Communication preference between different single system images (SSIs). Currently options not documented. Use default.
[rc]
Return code; equals ESMF_SUCCESS if there are no errors.

17.4.26 ESMF_GridCompSetVMMaxThreads - Set multi-threaded PETs in GridComp VM


INTERFACE:

   subroutine ESMF_GridCompSetVMMaxThreads(gridcomp, &
     maxPetCountPerVas, prefIntraProcess, prefIntraSsi, prefInterSsi, rc)
ARGUMENTS:
     type(ESMF_GridComp), intent(inout)         :: gridcomp
 -- The following arguments require argument keyword syntax (e.g. rc=rc). --
     integer,             intent(in),  optional :: maxPetCountPerVas
     integer,             intent(in),  optional :: prefIntraProcess
     integer,             intent(in),  optional :: prefIntraSsi
     integer,             intent(in),  optional :: prefInterSsi
     integer,             intent(out), optional :: rc
DESCRIPTION:

Set characteristics of the ESMF_VM for this ESMF_GridComp. Attempts to provide maxPetCountPerVas threaded PETs in each virtual address space (VAS). Only as many threaded PETs as there are PEs located on the single system image (SSI) can be associated with the VAS. Within this constraint the call tries to get as close as possible to the number specified by maxPetCountPerVas.

The other constraint to this call is that the number of PETs is preserved. This means that the child Component in the end is associated with as many PETs as the parent Component provided to the child. The threading level of the child PETs however is adjusted according to the above rule.

The typical use of ESMF_GridCompSetVMMaxThreads() is to run a Component multi-threaded with groups of PETs executing within a common virtual address space.

The arguments are:

gridcomp
ESMF_GridComp to set the ESMF_VM for.
[maxPetCountPerVas]
Maximum number of threaded PETs in each virtual address space (VAS). Default for each SSI is the local number of PEs.
[prefIntraProcess]
Communication preference within a single process. Currently options not documented. Use default.
[prefIntraSsi]
Communication preference within a single system image (SSI). Currently options not documented. Use default.
[prefInterSsi]
Communication preference between different single system images (SSIs). Currently options not documented. Use default.
[rc]
Return code; equals ESMF_SUCCESS if there are no errors.

17.4.27 ESMF_GridCompSetVMMinThreads - Set a reduced threading level in GridComp VM


INTERFACE:

   subroutine ESMF_GridCompSetVMMinThreads(gridcomp, &
     maxPeCountPerPet, prefIntraProcess, prefIntraSsi, prefInterSsi, rc)
ARGUMENTS:
     type(ESMF_GridComp), intent(inout)         :: gridcomp
 -- The following arguments require argument keyword syntax (e.g. rc=rc). --
     integer,             intent(in),  optional :: maxPeCountPerPet
     integer,             intent(in),  optional :: prefIntraProcess
     integer,             intent(in),  optional :: prefIntraSsi
     integer,             intent(in),  optional :: prefInterSsi
     integer,             intent(out), optional :: rc
DESCRIPTION:

Set characteristics of the ESMF_VM for this ESMF_GridComp. Reduces the number of threaded PETs in each VAS. The max argument may be specified to limit the maximum number of PEs that a single PET can be associated with.

Several constraints apply: 1) the number of PEs cannot change, 2) PEs cannot migrate between single system images (SSIs), 3) the number of PETs cannot increase, only decrease, 4) PETs cannot migrate between virtual address spaces (VASs), nor can VASs migrate between SSIs.

The typical use of ESMF_GridCompSetVMMinThreads() is to run a Component across a set of single-threaded PETs.

The arguments are:

gridcomp
ESMF_GridComp to set the ESMF_VM for.
[maxPeCountPerPet]
Maximum number of PEs on each PET. Default for each SSI is the local number of PEs.
[prefIntraProcess]
Communication preference within a single process. Currently options not documented. Use default.
[prefIntraSsi]
Communication preference within a single system image (SSI). Currently options not documented. Use default.
[prefInterSsi]
Communication preference between different single system images (SSIs). Currently options not documented. Use default.
[rc]
Return code; equals ESMF_SUCCESS if there are no errors.

17.4.28 ESMF_GridCompValidate - Check validity of a GridComp


INTERFACE:

   subroutine ESMF_GridCompValidate(gridcomp, rc)
ARGUMENTS:
     type(ESMF_GridComp), intent(in)            :: gridcomp
 -- The following arguments require argument keyword syntax (e.g. rc=rc). --
     integer,             intent(out), optional :: rc
STATUS:

DESCRIPTION:

Currently all this method does is to check that the gridcomp was created.

The arguments are:

gridcomp
ESMF_GridComp to validate.
[rc]
Return code; equals ESMF_SUCCESS if there are no errors.

17.4.29 ESMF_GridCompWait - Wait for a GridComp to return


INTERFACE:

   subroutine ESMF_GridCompWait(gridcomp, syncflag, &
     timeout, timeoutFlag, userRc, rc)
ARGUMENTS:
     type(ESMF_GridComp),  intent(inout)         :: gridcomp
 -- The following arguments require argument keyword syntax (e.g. rc=rc). --
     type(ESMF_Sync_Flag), intent(in),  optional :: syncflag
     integer,              intent(in),  optional :: timeout
     logical,              intent(out), optional :: timeoutFlag
     integer,              intent(out), optional :: userRc
     integer,              intent(out), optional :: rc
STATUS:

DESCRIPTION:

When executing asynchronously, wait for an ESMF_GridComp to return.

The arguments are:

gridcomp
ESMF_GridComp to wait for.
[syncflag]
Blocking behavior of this method call. See section 52.56 for a list of valid blocking options. Default option is ESMF_SYNC_VASBLOCKING which blocks PETs and their spawned off threads across each VAS but does not synchronize PETs that run in different VASs.
[timeout]
The maximum period in seconds the actual component is allowed to execute a previously invoked component method before it must communicate back to the dual component. If the actual component does not communicate back in the specified time, a timeout condition is raised on the dual side (this side). The default is 3600, i.e. 1 hour. The timeout argument is only supported for connected dual components.
[timeoutFlag]
Returns .true. if the timeout was reached, .false. otherwise. If timeoutFlag was not provided, a timeout condition will lead to a return code of rc \= ESMF_SUCCESS. Otherwise the return value of timeoutFlag is the sole indicator of a timeout condition.
[userRc]
Return code set by userRoutine before returning.
[rc]
Return code; equals ESMF_SUCCESS if there are no errors.

17.4.30 ESMF_GridCompWriteRestart - Call the GridComp's write restart routine


INTERFACE:

   recursive subroutine ESMF_GridCompWriteRestart(gridcomp, &
     importState, exportState, clock, syncflag, phase, timeout, timeoutFlag, &
     userRc, rc)
ARGUMENTS:
     type(ESMF_GridComp),  intent(inout)           :: gridcomp
 -- The following arguments require argument keyword syntax (e.g. rc=rc). --
     type(ESMF_State),     intent(inout), optional :: importState
     type(ESMF_State),     intent(inout), optional :: exportState
     type(ESMF_Clock),     intent(inout), optional :: clock
     type(ESMF_Sync_Flag), intent(in),    optional :: syncflag
     integer,              intent(in),    optional :: phase
     integer,              intent(in),    optional :: timeout
     logical,              intent(out),   optional :: timeoutFlag
     integer,              intent(out),   optional :: userRc
     integer,              intent(out),   optional :: rc
STATUS:

DESCRIPTION:

Call the associated user write restart routine for an ESMF_GridComp.

The arguments are:

gridcomp
ESMF_GridComp to call run routine for.
[importState]
ESMF_State containing import data. If not present, a dummy argument will be passed to the user-supplied routine. The importState argument in the user code cannot be optional.
[exportState]
ESMF_State containing export data. If not present, a dummy argument will be passed to the user-supplied routine. The exportState argument in the user code cannot be optional.
[clock]
External ESMF_Clock for passing in time information. This is generally the parent component's clock, and will be treated as read-only by the child component. The child component can maintain a private clock for its own internal time computations. If not present, a dummy argument will be passed to the user-supplied routine. The clock argument in the user code cannot be optional.
[syncflag]
Blocking behavior of this method call. See section 52.56 for a list of valid blocking options. Default option is ESMF_SYNC_VASBLOCKING which blocks PETs and their spawned off threads across each VAS but does not synchronize PETs that run in different VASs.
[phase]
Component providers must document whether each of their routines are single-phase or multi-phase. Single-phase routines require only one invocation to complete their work. Multi-phase routines provide multiple subroutines to accomplish the work, accommodating components which must complete part of their work, return to the caller and allow other processing to occur, and then continue the original operation. For multiple-phase child components, this is the integer phase number to be invoked. For single-phase child components this argument is optional. The default is 1.
[timeout]
The maximum period in seconds that this call will wait in communications with the actual component, before returning with a timeout condition. The default is 3600, i.e. 1 hour. The timeout argument is only supported for connected dual components.
[timeoutFlag]
Returns .true. if the timeout was reached, .false. otherwise. If timeoutFlag was not provided, a timeout condition will lead to a return code of rc \= ESMF_SUCCESS. Otherwise the return value of timeoutFlag is the sole indicator of a timeout condition.
[userRc]
Return code set by userRoutine before returning.
[rc]
Return code; equals ESMF_SUCCESS if there are no errors.

18 CplComp Class

18.1 Description

In a large, multi-component application such as a weather forecasting or climate prediction system running within ESMF, physical domains and major system functions are represented as Gridded Components (see Section 17.1). A Coupler Component, or ESMF_CplComp, arranges and executes the data transformations between the Gridded Components. Ideally, Coupler Components should contain all the information about inter-component communication for an application. This enables the Gridded Components in the application to be used in multiple contexts; that is, used in different coupled configurations without changes to their source code. For example, the same atmosphere might in one case be coupled to an ocean in a hurricane prediction model, and to a data assimilation system for numerical weather prediction in another. A single Coupler Component can couple two or more Gridded Components.

Like Gridded Components, Coupler Components have two parts, one that is provided by the user and another that is part of the framework. The user-written portion of the software is the coupling code necessary for a particular exchange between Gridded Components. This portion of the Coupler Component code must be divided into separately callable initialize, run, and finalize methods. The interfaces for these methods are prescribed by ESMF.

The term “user-written” is somewhat misleading here, since within a Coupler Component the user can leverage ESMF infrastructure software for regridding, redistribution, lower-level communications, calendar management, and other functions. However, ESMF is unlikely to offer all the software necessary to customize a data transfer between Gridded Components. For instance, ESMF does not currently offer tools for unit tranformations or time averaging operations, so users must manage those operations themselves.

The second part of a Coupler Component is the ESMF_CplComp derived type within ESMF. The user must create one of these types to represent a specific coupling function, such as the regular transfer of data between a data assimilation system and an atmospheric model. 2

The user-written part of a Coupler Component is associated with an ESMF_CplComp derived type through a routine called ESMF_SetServices(). This is a routine that the user must write and declare public. Inside the ESMF_SetServices() routine the user must call ESMF_SetEntryPoint() methods that associate a standard ESMF operation with the name of the corresponding Fortran subroutine in their user code. For example, a user routine called “couplerInit” might be associated with the standard initialize routine in a Coupler Component.

18.2 Use and Examples

A Coupler Component manages the transformation of data between Components. It contains a list of State objects and the operations needed to make them compatible, including such things as regridding and unit conversion. Coupler Components are user-written, following prescribed ESMF interfaces and, wherever desired, using ESMF infrastructure tools.

18.2.1 Implement a user-code SetServices routine

Every ESMF_CplComp is required to provide and document a public set services routine. It can have any name, but must follow the declaration below: a subroutine which takes an ESMF_CplComp as the first argument, and an integer return code as the second. Both arguments are required and must not be declared as optional. If an intent is specified in the interface it must be intent(inout) for the first and intent(out) for the second argument.

The set services routine must call the ESMF method ESMF_CplCompSetEntryPoint() to register with the framework what user-code subroutines should be called to initialize, run, and finalize the component. There are additional routines which can be registered as well, for checkpoint and restart functions.

Note that the actual subroutines being registered do not have to be public to this module; only the set services routine itself must be available to be used by other code.

    ! Example Coupler Component
    module ESMF_CouplerEx
    
    ! ESMF Framework module
    use ESMF
    implicit none
    public CPL_SetServices

    contains

    subroutine CPL_SetServices(comp, rc)
      type(ESMF_CplComp)    :: comp   ! must not be optional
      integer, intent(out)  :: rc     ! must not be optional

      ! Set the entry points for standard ESMF Component methods
      call ESMF_CplCompSetEntryPoint(comp, ESMF_METHOD_INITIALIZE, &
                          userRoutine=CPL_Init, rc=rc)
      call ESMF_CplCompSetEntryPoint(comp, ESMF_METHOD_RUN, &
                          userRoutine=CPL_Run, rc=rc)
      call ESMF_CplCompSetEntryPoint(comp, ESMF_METHOD_FINALIZE, &
                          userRoutine=CPL_Final, rc=rc)

      rc = ESMF_SUCCESS
    end subroutine

18.2.2 Implement a user-code Initialize routine

When a higher level component is ready to begin using an ESMF_CplComp, it will call its initialize routine.

The component writer must supply a subroutine with the exact interface shown below. Arguments must not be declared as optional, and the types and order must match.

At initialization time the component can allocate data space, open data files, set up initial conditions; anything it needs to do to prepare to run.

The rc return code should be set if an error occurs, otherwise the value ESMF_SUCCESS should be returned.

    subroutine CPL_Init(comp, importState, exportState, clock, rc)
      type(ESMF_CplComp)    :: comp               ! must not be optional
      type(ESMF_State)      :: importState        ! must not be optional
      type(ESMF_State)      :: exportState        ! must not be optional
      type(ESMF_Clock)      :: clock              ! must not be optional
      integer, intent(out)  :: rc                 ! must not be optional

      print *, "Coupler Init starting"
    
      ! Add whatever code here needed
      ! Precompute any needed values, fill in any inital values
      !  needed in Import States

      rc = ESMF_SUCCESS

      print *, "Coupler Init returning"
   
    end subroutine CPL_Init

18.2.3 Implement a user-code Run routine

During the execution loop, the run routine may be called many times. Each time it should read data from the importState, use the clock to determine what the current time is in the calling component, compute new values or process the data, and produce any output and place it in the exportState.

When a higher level component is ready to use the ESMF_CplComp it will call its run routine.

The component writer must supply a subroutine with the exact interface shown below. Arguments must not be declared as optional, and the types and order must match.

It is expected that this is where the bulk of the model computation or data analysis will occur.

The rc return code should be set if an error occurs, otherwise the value ESMF_SUCCESS should be returned.

    subroutine CPL_Run(comp, importState, exportState, clock, rc)
      type(ESMF_CplComp)    :: comp              ! must not be optional
      type(ESMF_State)      :: importState       ! must not be optional
      type(ESMF_State)      :: exportState       ! must not be optional
      type(ESMF_Clock)      :: clock             ! must not be optional
      integer, intent(out)  :: rc                ! must not be optional

      print *, "Coupler Run starting"

      ! Add whatever code needed here to transform Export state data
      !  into Import states for the next timestep.  

      rc = ESMF_SUCCESS

      print *, "Coupler Run returning"

    end subroutine CPL_Run

18.2.4 Implement a user-code Finalize routine

At the end of application execution, each ESMF_CplComp should deallocate data space, close open files, and flush final results. These functions should be placed in a finalize routine.

The component writer must supply a subroutine with the exact interface shown below. Arguments must not be declared as optional, and the types and order must match.

The rc return code should be set if an error occurs, otherwise the value ESMF_SUCCESS should be returned.

    subroutine CPL_Final(comp, importState, exportState, clock, rc)
      type(ESMF_CplComp)    :: comp                ! must not be optional
      type(ESMF_State)      :: importState         ! must not be optional
      type(ESMF_State)      :: exportState         ! must not be optional
      type(ESMF_Clock)      :: clock               ! must not be optional
      integer, intent(out)  :: rc                  ! must not be optional

      print *, "Coupler Final starting"
    
      ! Add whatever code needed here to compute final values and
      !  finish the computation.

      rc = ESMF_SUCCESS

      print *, "Coupler Final returning"
   
    end subroutine CPL_Final

18.2.5 Implement a user-code SetVM routine

Every ESMF_CplComp can optionally provide and document a public set vm routine. It can have any name, but must follow the declaration below: a subroutine which takes an ESMF_CplComp as the first argument, and an integer return code as the second. Both arguments are required and must not be declared as optional. If an intent is specified in the interface it must be intent(inout) for the first and intent(out) for the second argument.

The set vm routine is the only place where the child component can use the ESMF_CplCompSetVMMaxPEs(), or ESMF_CplCompSetVMMaxThreads(), or ESMF_CplCompSetVMMinThreads() call to modify aspects of its own VM.

A component's VM is started up right before its set services routine is entered. ESMF_CplCompSetVM() is executing in the parent VM, and must be called before ESMF_CplCompSetServices().

    subroutine GComp_SetVM(comp, rc)
      type(ESMF_CplComp)   :: comp   ! must not be optional
      integer, intent(out)  :: rc     ! must not be optional
      
      type(ESMF_VM) :: vm
      logical :: pthreadsEnabled
      
      ! Test for Pthread support, all SetVM calls require it
      call ESMF_VMGetGlobal(vm, rc=rc)
      call ESMF_VMGet(vm, pthreadsEnabledFlag=pthreadsEnabled, rc=rc)

      if (pthreadsEnabled) then
        ! run PETs single-threaded
        call ESMF_CplCompSetVMMinThreads(comp, rc=rc)
      endif

      rc = ESMF_SUCCESS

    end subroutine

    end module ESMF_CouplerEx

18.3 Restrictions and Future Work

  1. No optional arguments. User-written routines called by SetServices, and registered for Initialize, Run and Finalize, must not declare any of the arguments as optional.

  2. No Transforms. Components must exchange data through ESMF_State objects. The input data are available at the time the component code is called, and data to be returned to another component are available when that code returns.

  3. No automatic unit conversions. The ESMF framework does not currently contain tools for performing unit conversions, operations that are fairly standard within Coupler Components.

  4. No accumulator. The ESMF does not have an accumulator tool, to perform time averaging of fields for coupling. This is likely to be developed in the near term.

18.4 Class API

18.4.1 ESMF_CplCompAssignment(=) - CplComp assignment


INTERFACE:

     interface assignment(=)
     cplcomp1 = cplcomp2
ARGUMENTS:
     type(ESMF_CplComp) :: cplcomp1
     type(ESMF_CplComp) :: cplcomp2
STATUS:

DESCRIPTION:

Assign cplcomp1 as an alias to the same ESMF CplComp object in memory as cplcomp2. If cplcomp2 is invalid, then cplcomp1 will be equally invalid after the assignment.

The arguments are:

cplcomp1
The ESMF_CplComp object on the left hand side of the assignment.
cplcomp2
The ESMF_CplComp object on the right hand side of the assignment.

18.4.2 ESMF_CplCompOperator(==) - CplComp equality operator


INTERFACE:

   interface operator(==)
     if (cplcomp1 == cplcomp2) then ... endif
               OR
     result = (cplcomp1 == cplcomp2)
RETURN VALUE:
     logical :: result
ARGUMENTS:
     type(ESMF_CplComp), intent(in) :: cplcomp1
     type(ESMF_CplComp), intent(in) :: cplcomp2
STATUS:

DESCRIPTION:

Test whether cplcomp1 and cplcomp2 are valid aliases to the same ESMF CplComp object in memory. For a more general comparison of two ESMF CplComps, going beyond the simple alias test, the ESMF_CplCompMatch() function (not yet implemented) must be used.

The arguments are:

cplcomp1
The ESMF_CplComp object on the left hand side of the equality operation.
cplcomp2
The ESMF_CplComp object on the right hand side of the equality operation.

18.4.3 ESMF_CplCompOperator(/=) - CplComp not equal operator


INTERFACE:

   interface operator(/=)
     if (cplcomp1 /= cplcomp2) then ... endif
               OR
     result = (cplcomp1 /= cplcomp2)
RETURN VALUE:
     logical :: result
ARGUMENTS:
     type(ESMF_CplComp), intent(in) :: cplcomp1
     type(ESMF_CplComp), intent(in) :: cplcomp2
STATUS:

DESCRIPTION:

Test whether cplcomp1 and cplcomp2 are not valid aliases to the same ESMF CplComp object in memory. For a more general comparison of two ESMF CplComps, going beyond the simple alias test, the ESMF_CplCompMatch() function (not yet implemented) must be used.

The arguments are:

cplcomp1
The ESMF_CplComp object on the left hand side of the non-equality operation.
cplcomp2
The ESMF_CplComp object on the right hand side of the non-equality operation.

18.4.4 ESMF_CplCompCreate - Create a CplComp


INTERFACE:

   recursive function ESMF_CplCompCreate(config, configFile, &
     clock, petList, contextflag, name, rc)
RETURN VALUE:
     type(ESMF_CplComp) :: ESMF_CplCompCreate
ARGUMENTS:
 -- The following arguments require argument keyword syntax (e.g. rc=rc). --
     type(ESMF_Config),       intent(in),  optional :: config
     character(len=*),        intent(in),  optional :: configFile
     type(ESMF_Clock),        intent(in),  optional :: clock
     integer,                 intent(in),  optional :: petList(:)
     type(ESMF_Context_Flag), intent(in),  optional :: contextflag
     character(len=*),        intent(in),  optional :: name
     integer,                 intent(out), optional :: rc
STATUS:

DESCRIPTION:

This interface creates an ESMF_CplComp object. By default, a separate VM context will be created for each component. This implies creating a new MPI communicator and allocating additional memory to manage the VM resources. When running on a large number of processors, creating a separate VM for each component could be both time and memory inefficient. If the application is sequential, i.e., each component is running on all the PETs of the global VM, it will be more efficient to use the global VM instead of creating a new one. This can be done by setting contextflag to ESMF_CONTEXT_PARENT_VM.

The return value is the new ESMF_CplComp.

The arguments are:

[config]
An already-created ESMF_Config object to be attached to the newly created component. If both config and configFile arguments are specified, config takes priority.
[configFile]
The filename of an ESMF_Config format file. If specified, a new ESMF_Config object is created and attached to the newly created component. The configFile file is opened and associated with the new config object. If both config and configFile arguments are specified, config takes priority.
[clock]
Component-specific ESMF_Clock. This clock is available to be queried and updated by the new ESMF_CplComp as it chooses. This should not be the parent component clock, which should be maintained and passed down to the initialize/run/finalize routines separately.
[petList]
List of parent PETs given to the created child component by the parent component. If petList is not specified all of the parent PETs will be given to the child component. The order of PETs in petList determines how the child local PETs refer back to the parent PETs.
[contextflag]
Specify the component's VM context. The default context is ESMF_CONTEXT_OWN_VM. See section 52.10 for a complete list of valid flags.
[name]
Name of the newly-created ESMF_CplComp. This name can be altered from within the ESMF_CplComp code once the initialization routine is called.
[rc]
Return code; equals ESMF_SUCCESS if there are no errors.

18.4.5 ESMF_CplCompDestroy - Release resources associated with a CplComp


INTERFACE:

   recursive subroutine ESMF_CplCompDestroy(cplcomp, &
     timeout, timeoutFlag, rc)
ARGUMENTS:
     type(ESMF_CplComp), intent(inout)          :: cplcomp
 -- The following arguments require argument keyword syntax (e.g. rc=rc). --
     integer,            intent(in),   optional :: timeout
     logical,            intent(out),  optional :: timeoutFlag
     integer,            intent(out),  optional :: rc
STATUS:

DESCRIPTION:

Destroys an ESMF_CplComp, releasing the resources associated with the object.

The arguments are:

cplcomp
Release all resources associated with this ESMF_CplComp and mark the object as invalid. It is an error to pass this object into any other routines after being destroyed.
[timeout]
The maximum period in seconds that this call will wait in communications with the actual component, before returning with a timeout condition. The default is 3600, i.e. 1 hour. The timeout argument is only supported for connected dual components.
[timeoutFlag]
Returns .true. if the timeout was reached, .false. otherwise. If timeoutFlag was not provided, a timeout condition will lead to a return code of rc \= ESMF_SUCCESS. Otherwise the return value of timeoutFlag is the sole indicator of a timeout condition.
[rc]
Return code; equals ESMF_SUCCESS if there are no errors.

18.4.6 ESMF_CplCompFinalize - Call the CplComp's finalize routine


INTERFACE:

   recursive subroutine ESMF_CplCompFinalize(cplcomp, &
     importState, exportState, clock, syncflag, phase, timeout, timeoutFlag, &
     userRc, rc)
ARGUMENTS:
     type(ESMF_CplComp),   intent(inout)           :: cplcomp
 -- The following arguments require argument keyword syntax (e.g. rc=rc). --
     type(ESMF_State),     intent(inout), optional :: importState
     type(ESMF_State),     intent(inout), optional :: exportState
     type(ESMF_Clock),     intent(inout), optional :: clock
     type(ESMF_Sync_Flag), intent(in),    optional :: syncflag
     integer,              intent(in),    optional :: phase
     integer,              intent(in),    optional :: timeout
     logical,              intent(out),   optional :: timeoutFlag
     integer,              intent(out),   optional :: userRc
     integer,              intent(out),   optional :: rc
STATUS:

DESCRIPTION:

Call the associated user-supplied finalization routine for an ESMF_CplComp.

The arguments are:

cplcomp
The ESMF_CplComp to call finalize routine for.
[importState]
ESMF_State containing import data for coupling. If not present, a dummy argument will be passed to the user-supplied routine. The importState argument in the user code cannot be optional.
[exportState]
ESMF_State containing export data for coupling. If not present, a dummy argument will be passed to the user-supplied routine. The exportState argument in the user code cannot be optional.
[clock]
External ESMF_Clock for passing in time information. This is generally the parent component's clock, and will be treated as read-only by the child component. The child component can maintain a private clock for its own internal time computations. If not present, a dummy argument will be passed to the user-supplied routine. The clock argument in the user code cannot be optional.
[syncflag]
Blocking behavior of this method call. See section 52.56 for a list of valid blocking options. Default option is ESMF_SYNC_VASBLOCKING which blocks PETs and their spawned off threads across each VAS but does not synchronize PETs that run in different VASs.
[phase]
Component providers must document whether each of their routines are single-phase or multi-phase. Single-phase routines require only one invocation to complete their work. Multi-phase routines provide multiple subroutines to accomplish the work, accommodating components which must complete part of their work, return to the caller and allow other processing to occur, and then continue the original operation. For multiple-phase child components, this is the integer phase number to be invoked. For single-phase child components this argument is optional. The default is 1.
[timeout]
The maximum period in seconds that this call will wait in communications with the actual component, before returning with a timeout condition. The default is 3600, i.e. 1 hour. The timeout argument is only supported for connected dual components.
[timeoutFlag]
Returns .true. if the timeout was reached, .false. otherwise. If timeoutFlag was not provided, a timeout condition will lead to a return code of rc \= ESMF_SUCCESS. Otherwise the return value of timeoutFlag is the sole indicator of a timeout condition.
[userRc]
Return code set by userRoutine before returning.
[rc]
Return code; equals ESMF_SUCCESS if there are no errors.

18.4.7 ESMF_CplCompGet - Get CplComp information


INTERFACE:

   subroutine ESMF_CplCompGet(cplcomp, configIsPresent, config, &
     configFileIsPresent, configFile, clockIsPresent, clock, localPet, &
     petCount, contextflag, currentMethod, currentPhase, vmIsPresent, &
     vm, name, rc)
ARGUMENTS:
     type(ESMF_CplComp),      intent(in)            :: cplcomp
 -- The following arguments require argument keyword syntax (e.g. rc=rc). --
     logical,                 intent(out), optional :: configIsPresent
     type(ESMF_Config),       intent(out), optional :: config
     logical,                 intent(out), optional :: configFileIsPresent
     character(len=*),        intent(out), optional :: configFile
     logical,                 intent(out), optional :: clockIsPresent
     type(ESMF_Clock),        intent(out), optional :: clock
     integer,                 intent(out), optional :: localPet
     integer,                 intent(out), optional :: petCount
     type(ESMF_Context_Flag), intent(out), optional :: contextflag
     type(ESMF_Method_Flag),  intent(out), optional :: currentMethod
     integer,                 intent(out), optional :: currentPhase
     logical,                 intent(out), optional :: vmIsPresent
     type(ESMF_VM),           intent(out), optional :: vm
     character(len=*),        intent(out), optional :: name
     integer,                 intent(out), optional :: rc
STATUS:

DESCRIPTION:

Get information about an ESMF_CplComp object.

The arguments are:

cplcomp
The ESMF_CplComp object being queried.
[configIsPresent]
.true. if config was set in CplComp object, .false. otherwise.
[config]
Return the associated Config. It is an error to query for the Config if none is associated with the CplComp. If unsure, get configIsPresent first to determine the status.
[configFileIsPresent]
.true. if configFile was set in CplComp object, .false. otherwise.
[configFile]
Return the associated configuration filename. It is an error to query for the configuration filename if none is associated with the CplComp. If unsure, get configFileIsPresent first to determine the status.
[clockIsPresent]
.true. if clock was set in CplComp object, .false. otherwise.
[clock]
Return the associated Clock. It is an error to query for the Clock if none is associated with the CplComp. If unsure, get clockIsPresent first to determine the status.
[localPet]
Return the local PET id within the ESMF_CplComp object.
[petCount]
Return the number of PETs in the the ESMF_CplComp object.
[contextflag]
Return the ESMF_Context_Flag for this ESMF_CplComp. See section 52.10 for a complete list of valid flags.
[currentMethod]
Return the current ESMF_Method_Flag of the ESMF_CplComp execution. See section 52.41 for a complete list of valid options.
[currentPhase]
Return the current phase of the ESMF_CplComp execution.
[vmIsPresent]
.true. if vm was set in CplComp object, .false. otherwise.
[vm]
Return the associated VM. It is an error to query for the VM if none is associated with the CplComp. If unsure, get vmIsPresent first to determine the status.
[name]
Return the name of the ESMF_CplComp.
[rc]
Return code; equals ESMF_SUCCESS if there are no errors.

18.4.8 ESMF_CplCompGetInternalState - Get private data block pointer


INTERFACE:

   subroutine ESMF_CplCompGetInternalState(cplcomp, wrappedDataPointer, rc)
ARGUMENTS:
     type(ESMF_CplComp)              :: cplcomp
     type(wrapper)                   :: wrappedDataPointer
     integer,            intent(out) :: rc
STATUS:

DESCRIPTION:

Available to be called by an ESMF_CplComp at any time after ESMF_CplCompSetInternalState has been called. Since init, run, and finalize must be separate subroutines, data that they need to share in common can either be module global data, or can be allocated in a private data block and the address of that block can be registered with the framework and retrieved by this call. When running multiple instantiations of an ESMF_CplComp, for example during ensemble runs, it may be simpler to maintain private data specific to each run with private data blocks. A corresponding ESMF_CplCompSetInternalState call sets the data pointer to this block, and this call retrieves the data pointer. Note that the wrappedDataPointer argument needs to be a derived type which contains only a pointer of the type of the data block defined by the user. When making this call the pointer needs to be unassociated. When the call returns, the pointer will now reference the original data block which was set during the previous call to ESMF_CplCompSetInternalState.

Only the last data block set via ESMF_CplCompSetInternalState will be accessible.

CAUTION: This method does not have an explicit Fortran interface. Do not specify argument keywords when calling this method!

The arguments are:

cplcomp
An ESMF_CplComp object.
wrappedDataPointer
A derived type (wrapper), containing only an unassociated pointer to the private data block. The framework will fill in the pointer. When this call returns, the pointer is set to the same address set during the last ESMF_CplCompSetInternalState call. This level of indirection is needed to reliably set and retrieve the data block no matter which architecture or compiler is used.
rc
Return code; equals ESMF_SUCCESS if there are no errors. Note: unlike most other ESMF routines, this argument is not optional because of implementation considerations.

18.4.9 ESMF_CplCompInitialize - Call the CplComp's initialize routine


INTERFACE:

   recursive subroutine ESMF_CplCompInitialize(cplcomp, &
     importState, exportState, clock, syncflag, phase, timeout, timeoutFlag, &
     userRc, rc)
ARGUMENTS:
     type(ESMF_CplComp),   intent(inout)           :: cplcomp
 -- The following arguments require argument keyword syntax (e.g. rc=rc). --
     type(ESMF_State),     intent(inout), optional :: importState
     type(ESMF_State),     intent(inout), optional :: exportState
     type(ESMF_Clock),     intent(inout), optional :: clock
     type(ESMF_Sync_Flag), intent(in),    optional :: syncflag
     integer,              intent(in),    optional :: phase
     integer,              intent(in),    optional :: timeout
     logical,              intent(out),   optional :: timeoutFlag
     integer,              intent(out),   optional :: userRc
     integer,              intent(out),   optional :: rc
STATUS:

DESCRIPTION:

Call the associated user initialization routine for an ESMF_CplComp.

The arguments are:

cplcomp
ESMF_CplComp to call initialize routine for.
[importState]
ESMF_State containing import data for coupling. If not present, a dummy argument will be passed to the user-supplied routine. The importState argument in the user code cannot be optional.
[exportState]
ESMF_State containing export data for coupling. If not present, a dummy argument will be passed to the user-supplied routine. The exportState argument in the user code cannot be optional.
[clock]
External ESMF_Clock for passing in time information. This is generally the parent component's clock, and will be treated as read-only by the child component. The child component can maintain a private clock for its own internal time computations. If not present, a dummy argument will be passed to the user-supplied routine. The clock argument in the user code cannot be optional.
[syncflag]
Blocking behavior of this method call. See section 52.56 for a list of valid blocking options. Default option is ESMF_SYNC_VASBLOCKING which blocks PETs and their spawned off threads across each VAS but does not synchronize PETs that run in different VASs.
[phase]
Component providers must document whether each of their routines are single-phase or multi-phase. Single-phase routines require only one invocation to complete their work. Multi-phase routines provide multiple subroutines to accomplish the work, accommodating components which must complete part of their work, return to the caller and allow other processing to occur, and then continue the original operation. For multiple-phase child components, this is the integer phase number to be invoked. For single-phase child components this argument is optional. The default is 1.
[timeout]
The maximum period in seconds that this call will wait in communications with the actual component, before returning with a timeout condition. The default is 3600, i.e. 1 hour. The timeout argument is only supported for connected dual components.
[timeoutFlag]
Returns .true. if the timeout was reached, .false. otherwise. If timeoutFlag was not provided, a timeout condition will lead to a return code of rc \= ESMF_SUCCESS. Otherwise the return value of timeoutFlag is the sole indicator of a timeout condition.
[userRc]
Return code set by userRoutine before returning.
[rc]
Return code; equals ESMF_SUCCESS if there are no errors.

18.4.10 ESMF_CplCompIsCreated - Check whether a CplComp object has been created


INTERFACE:

   function ESMF_CplCompIsCreated(cplcomp, rc)
RETURN VALUE:
     logical :: ESMF_CplCompIsCreated
ARGUMENTS:
     type(ESMF_CplComp), intent(in)            :: cplcomp
 -- The following arguments require argument keyword syntax (e.g. rc=rc). --
     integer,             intent(out), optional :: rc
DESCRIPTION:

Return .true. if the cplcomp has been created. Otherwise return .false.. If an error occurs, i.e. rc /= ESMF_SUCCESS is returned, the return value of the function will also be .false..

The arguments are:

cplcomp
ESMF_CplComp queried.
[rc]
Return code; equals ESMF_SUCCESS if there are no errors.

18.4.11 ESMF_CplCompIsPetLocal - Inquire if this CplComp is to execute on the calling PET


INTERFACE:

   recursive function ESMF_CplCompIsPetLocal(cplcomp, rc)
RETURN VALUE:
     logical :: ESMF_CplCompIsPetLocal
ARGUMENTS:
     type(ESMF_CplComp), intent(in)            :: cplcomp
 -- The following arguments require argument keyword syntax (e.g. rc=rc). --
     integer,            intent(out), optional :: rc
STATUS:

DESCRIPTION:

Inquire if this ESMF_CplComp object is to execute on the calling PET.

The return value is .true. if the component is to execute on the calling PET, .false. otherwise.

The arguments are:

cplcomp
ESMF_CplComp queried.
[rc]
Return code; equals ESMF_SUCCESS if there are no errors.

18.4.12 ESMF_CplCompPrint - Print CplComp information


INTERFACE:

   subroutine ESMF_CplCompPrint(cplcomp, rc)
ARGUMENTS:
     type(ESMF_CplComp), intent(in)            :: cplcomp
 -- The following arguments require argument keyword syntax (e.g. rc=rc). --
     integer,            intent(out), optional :: rc
STATUS:

DESCRIPTION:

Prints information about an ESMF_CplComp to stdout.

The arguments are:

cplcomp
ESMF_CplComp to print.
[rc]
Return code; equals ESMF_SUCCESS if there are no errors.

18.4.13 ESMF_CplCompReadRestart - Call the CplComp's read restart routine


INTERFACE:

   recursive subroutine ESMF_CplCompReadRestart(cplcomp, &
     importState, exportState, clock, syncflag, phase, timeout, timeoutFlag, &
     userRc, rc)
ARGUMENTS:
     type(ESMF_CplComp),   intent(inout)           :: cplcomp
 -- The following arguments require argument keyword syntax (e.g. rc=rc). --
     type(ESMF_State),     intent(inout), optional :: importState
     type(ESMF_State),     intent(inout), optional :: exportState
     type(ESMF_Clock),     intent(inout), optional :: clock
     type(ESMF_Sync_Flag), intent(in),    optional :: syncflag
     integer,              intent(in),    optional :: phase
     integer,              intent(in),    optional :: timeout
     logical,              intent(out),   optional :: timeoutFlag
     integer,              intent(out),   optional :: userRc
     integer,              intent(out),   optional :: rc
STATUS:

DESCRIPTION:

Call the associated user read restart routine for an ESMF_CplComp.

The arguments are:

cplcomp
ESMF_CplComp to call run routine for.
[importState]
ESMF_State containing import data. If not present, a dummy argument will be passed to the user-supplied routine. The importState argument in the user code cannot be optional.
[exportState]
ESMF_State containing export data. If not present, a dummy argument will be passed to the user-supplied routine. The exportState argument in the user code cannot be optional.
[clock]
External ESMF_Clock for passing in time information. This is generally the parent component's clock, and will be treated as read-only by the child component. The child component can maintain a private clock for its own internal time computations. If not present, a dummy argument will be passed to the user-supplied routine. The clock argument in the user code cannot be optional.
[syncflag]
Blocking behavior of this method call. See section 52.56 for a list of valid blocking options. Default option is ESMF_SYNC_VASBLOCKING which blocks PETs and their spawned off threads across each VAS but does not synchronize PETs that run in different VASs.
[phase]
Component providers must document whether each of their routines are single-phase or multi-phase. Single-phase routines require only one invocation to complete their work. Multi-phase routines provide multiple subroutines to accomplish the work, accommodating components which must complete part of their work, return to the caller and allow other processing to occur, and then continue the original operation. For multiple-phase child components, this is the integer phase number to be invoked. For single-phase child components this argument is optional. The default is 1.
[timeout]
The maximum period in seconds that this call will wait in communications with the actual component, before returning with a timeout condition. The default is 3600, i.e. 1 hour. The timeout argument is only supported for connected dual components.
[timeoutFlag]
Returns .true. if the timeout was reached, .false. otherwise. If timeoutFlag was not provided, a timeout condition will lead to a return code of rc \= ESMF_SUCCESS. Otherwise the return value of timeoutFlag is the sole indicator of a timeout condition.
[userRc]
Return code set by userRoutine before returning.
[rc]
Return code; equals ESMF_SUCCESS if there are no errors.

18.4.14 ESMF_CplCompRun - Call the CplComp's run routine


INTERFACE:

   recursive subroutine ESMF_CplCompRun(cplcomp, &
     importState, exportState, clock, syncflag, phase, timeout, timeoutFlag, &
     userRc, rc)
ARGUMENTS:
     type(ESMF_CplComp),   intent(inout)           :: cplcomp
 -- The following arguments require argument keyword syntax (e.g. rc=rc). --
     type(ESMF_State),     intent(inout), optional :: importState
     type(ESMF_State),     intent(inout), optional :: exportState
     type(ESMF_Clock),     intent(inout), optional :: clock
     type(ESMF_Sync_Flag), intent(in),    optional :: syncflag
     integer,              intent(in),    optional :: phase
     integer,              intent(in),    optional :: timeout
     logical,              intent(out),   optional :: timeoutFlag
     integer,              intent(out),   optional :: userRc
     integer,              intent(out),   optional :: rc
STATUS:

DESCRIPTION:

Call the associated user run routine for an ESMF_CplComp.

The arguments are:

cplcomp
ESMF_CplComp to call run routine for.
[importState]
ESMF_State containing import data for coupling. If not present, a dummy argument will be passed to the user-supplied routine. The importState argument in the user code cannot be optional.
[exportState]
ESMF_State containing export data for coupling. If not present, a dummy argument will be passed to the user-supplied routine. The exportState argument in the user code cannot be optional.
[clock]
External ESMF_Clock for passing in time information. This is generally the parent component's clock, and will be treated as read-only by the child component. The child component can maintain a private clock for its own internal time computations. If not present, a dummy argument will be passed to the user-supplied routine. The clock argument in the user code cannot be optional.
[syncflag]
Blocking behavior of this method call. See section 52.56 for a list of valid blocking options. Default option is ESMF_SYNC_VASBLOCKING which blocks PETs and their spawned off threads across each VAS but does not synchronize PETs that run in different VASs.
[phase]
Component providers must document whether each of their routines are single-phase or multi-phase. Single-phase routines require only one invocation to complete their work. Multi-phase routines provide multiple subroutines to accomplish the work, accommodating components which must complete part of their work, return to the caller and allow other processing to occur, and then continue the original operation. For multiple-phase child components, this is the integer phase number to be invoked. For single-phase child components this argument is optional. The default is 1.
[timeout]
The maximum period in seconds that this call will wait in communications with the actual component, before returning with a timeout condition. The default is 3600, i.e. 1 hour. The timeout argument is only supported for connected dual components.
[timeoutFlag]
Returns .true. if the timeout was reached, .false. otherwise. If timeoutFlag was not provided, a timeout condition will lead to a return code of rc \= ESMF_SUCCESS. Otherwise the return value of timeoutFlag is the sole indicator of a timeout condition.
[userRc]
Return code set by userRoutine before returning.
[rc]
Return code; equals ESMF_SUCCESS if there are no errors.

18.4.15 ESMF_CplCompServiceLoop - Call the CplComp's service loop routine


INTERFACE:

   recursive subroutine ESMF_CplCompServiceLoop(cplcomp, &
     importState, exportState, clock, syncflag, port, timeout, timeoutFlag, rc)
ARGUMENTS:
     type(ESMF_CplComp),   intent(inout)           :: cplcomp
 -- The following arguments require argument keyword syntax (e.g. rc=rc). --
     type(ESMF_State),     intent(inout), optional :: importState
     type(ESMF_State),     intent(inout), optional :: exportState
     type(ESMF_Clock),     intent(inout), optional :: clock
     type(ESMF_Sync_Flag), intent(in),    optional :: syncflag
     integer,              intent(in),    optional :: port
     integer,              intent(in),    optional :: timeout
     logical,              intent(out),   optional :: timeoutFlag
     integer,              intent(out),   optional :: rc
DESCRIPTION:

Call the ServiceLoop routine for an ESMF_CplComp. This tries to establish a "component tunnel" between the actual Component (calling this routine) and a dual Component connecting to it through a matching SetServices call.

The arguments are:

cplcomp
ESMF_CplComp to call service loop routine for.
[importState]
ESMF_State containing import data for coupling. If not present, a dummy argument will be passed to the user-supplied routine. The importState argument in the user code cannot be optional.
[exportState]
ESMF_State containing export data for coupling. If not present, a dummy argument will be passed to the user-supplied routine. The exportState argument in the user code cannot be optional.
[clock]
External ESMF_Clock for passing in time information. This is generally the parent component's clock, and will be treated as read-only by the child component. The child component can maintain a private clock for its own internal time computations. If not present, a dummy argument will be passed to the user-supplied routine. The clock argument in the user code cannot be optional.
[syncflag]
Blocking behavior of this method call. See section 52.56 for a list of valid blocking options. Default option is ESMF_SYNC_VASBLOCKING which blocks PETs and their spawned off threads across each VAS but does not synchronize PETs that run in different VASs.
[port]
In case a port number is provided, the "component tunnel" is established using sockets. The actual component side, i.e. the side that calls into ESMF_CplCompServiceLoop(), starts to listen on the specified port as the server. The valid port range is [1024, 65535]. In case the port argument is not specified, the "component tunnel" is established within the same executable using local communication methods (e.g. MPI).
[timeout]
The maximum period in seconds that this call will wait for communications with the dual component, before returning with a timeout condition. The default is 3600, i.e. 1 hour. (NOTE: Currently this option is only available for socket based component tunnels.)
[timeoutFlag]
Returns .true. if the timeout was reached, .false. otherwise. If timeoutFlag was not provided, a timeout condition will lead to a return code of rc \= ESMF_SUCCESS. Otherwise the return value of timeoutFlag is the sole indicator of a timeout condition.
[rc]
Return code; equals ESMF_SUCCESS if there are no errors.

18.4.16 ESMF_CplCompSet - Set or reset information about the CplComp


INTERFACE:

   subroutine ESMF_CplCompSet(cplcomp, config, configFile, &
     clock, name, rc)
ARGUMENTS:
     type(ESMF_CplComp), intent(inout)         :: cplcomp
 -- The following arguments require argument keyword syntax (e.g. rc=rc). --
     type(ESMF_Config),  intent(in),  optional :: config
     character(len=*),   intent(in),  optional :: configFile
     type(ESMF_Clock),   intent(in),  optional :: clock
     character(len=*),   intent(in),  optional :: name
     integer,            intent(out), optional :: rc
STATUS:

DESCRIPTION:

Sets or resets information about an ESMF_CplComp.

The arguments are:

cplcomp
ESMF_CplComp to change.
[name]
Set the name of the ESMF_CplComp.
[config]
An already-created ESMF_Config object to be attached to the component. If both config and configFile arguments are specified, config takes priority.
[configFile]
The filename of an ESMF_Config format file. If specified, a new ESMF_Config object is created and attached to the component. The configFile file is opened and associated with the new config object. If both config and configFile arguments are specified, config takes priority.
[clock]
Set the private clock for this ESMF_CplComp.
[rc]
Return code; equals ESMF_SUCCESS if there are no errors.

18.4.17 ESMF_CplCompSetEntryPoint - Set user routine as entry point for standard Component method


INTERFACE:

   recursive subroutine ESMF_CplCompSetEntryPoint(cplcomp, methodflag, &
     userRoutine, phase, rc)
ARGUMENTS:
     type(ESMF_CplComp),     intent(inout)         :: cplcomp
     type(ESMF_Method_Flag), intent(in)            :: methodflag
     interface
       subroutine userRoutine(cplcomp, importState, exportState, clock, rc)
         use ESMF_CompMod
         use ESMF_StateMod
         use ESMF_ClockMod
         implicit none
         type(ESMF_CplComp)          :: cplcomp      ! must not be optional
         type(ESMF_State)            :: importState  ! must not be optional
         type(ESMF_State)            :: exportState  ! must not be optional
         type(ESMF_Clock)            :: clock        ! must not be optional
         integer, intent(out)        :: rc           ! must not be optional
       end subroutine
     end interface
 -- The following arguments require argument keyword syntax (e.g. rc=rc). --
     integer,                intent(in),  optional :: phase
     integer,                intent(out), optional :: rc
STATUS:

DESCRIPTION:

Registers a user-supplied userRoutine as the entry point for one of the predefined Component methodflags. After this call the userRoutine becomes accessible via the standard Component method API.

The arguments are:

cplcomp
An ESMF_CplComp object.
methodflag
One of a set of predefined Component methods - e.g. ESMF_METHOD_INITIALIZE, ESMF_METHOD_RUN, ESMF_METHOD_FINALIZE. See section 52.41 for a complete list of valid method options.
userRoutine
The user-supplied subroutine to be associated for this methodflag. The Component writer must supply a subroutine with the exact interface shown above for the userRoutine argument. Arguments in userRoutine must not be declared as optional, and the types, intent and order must match. Prior to Fortran-2008, the subroutine must be either a module scope procedure, or an external procedure that has a matching interface block specified for it. An internal procedure which is contained within another procedure must not be used. From Fortran-2008 onwards, an internal procedure contained within either a main program or a module procedure may be used. If the internal procedure is contained within a module procedure, it is subject to initialization requirements. See: 16.4.8
[phase]
The phase number for multi-phase methods. For single phase methods the phase argument can be omitted. The default setting is 1.
[rc]
Return code; equals ESMF_SUCCESS if there are no errors.

18.4.18 ESMF_CplCompSetInternalState - Set private data block pointer


INTERFACE:

   subroutine ESMF_CplCompSetInternalState(cplcomp, wrappedDataPointer, rc)
ARGUMENTS:
     type(ESMF_CplComp)              :: cplcomp
     type(wrapper)                   :: wrappedDataPointer
     integer,            intent(out) :: rc
STATUS:

DESCRIPTION:

Available to be called by an ESMF_CplComp at any time, but expected to be most useful when called during the registration process, or initialization. Since init, run, and finalize must be separate subroutines data that they need to share in common can either be module global data, or can be allocated in a private data block and the address of that block can be registered with the framework and retrieved by subsequent calls. When running multiple instantiations of an ESMF_CplComp, for example during ensemble runs, it may be simpler to maintain private data specific to each run with private data blocks. A corresponding ESMF_CplCompGetInternalState call retrieves the data pointer.

Only the last data block set via ESMF_CplCompSetInternalState will be accessible.

CAUTION: This method does not have an explicit Fortran interface. Do not specify argument keywords when calling this method!

The arguments are:

cplcomp
An ESMF_CplComp object.
wrappedDataPointer
A pointer to the private data block, wrapped in a derived type which contains only a pointer to the block. This level of indirection is needed to reliably set and retrieve the data block no matter which architecture or compiler is used.
rc
Return code; equals ESMF_SUCCESS if there are no errors. Note: unlike most other ESMF routines, this argument is not optional because of implementation considerations.

18.4.19 ESMF_CplCompSetServices - Call user routine to register CplComp methods


INTERFACE:

   recursive subroutine ESMF_CplCompSetServices(cplcomp, userRoutine, &
      userRc, rc)
ARGUMENTS:
     type(ESMF_CplComp), intent(inout)         :: cplcomp
     interface
       subroutine userRoutine(cplcomp, rc)
         use ESMF_CompMod
         implicit none
         type(ESMF_CplComp)         :: cplcomp  ! must not be optional
         integer, intent(out)       :: rc       ! must not be optional
       end subroutine
     end interface
 -- The following arguments require argument keyword syntax (e.g. rc=rc). --
     integer,            intent(out), optional :: userRc
     integer,            intent(out), optional :: rc
STATUS:

DESCRIPTION:

Call into user provided userRoutine which is responsible for setting Component's Initialize(), Run(), and Finalize() services.

The arguments are:

cplcomp
Coupler Component.
userRoutine
The Component writer must supply a subroutine with the exact interface shown above for the userRoutine argument. Arguments in userRoutine must not be declared as optional, and the types, intent and order must match. Prior to Fortran-2008, the subroutine must be either a module scope procedure, or an external procedure that has a matching interface block specified for it. An internal procedure which is contained within another procedure must not be used. From Fortran-2008 onwards, an internal procedure contained within either a main program or a module procedure may be used. If the internal procedure is contained within a module procedure, it is subject to initialization requirements. See: 16.4.8

The userRoutine, when called by the framework, must make successive calls to ESMF_CplCompSetEntryPoint() to preset callback routines for standard Component Initialize(), Run(), and Finalize() methods.

[userRc]
Return code set by userRoutine before returning.
[rc]
Return code; equals ESMF_SUCCESS if there are no errors.

18.4.20 ESMF_CplCompSetServices - Call user routine through name lookup, to register CplComp methods


INTERFACE:

   ! Private name; call using ESMF_CplCompSetServices()
   recursive subroutine ESMF_CplCompSetServicesShObj(cplcomp, userRoutine, &
     sharedObj, userRoutineFound, userRc, rc)
ARGUMENTS:
     type(ESMF_CplComp),  intent(inout)         :: cplcomp
     character(len=*),    intent(in)            :: userRoutine
 -- The following arguments require argument keyword syntax (e.g. rc=rc). --
     character(len=*),    intent(in),  optional :: sharedObj
     logical,             intent(out), optional :: userRoutineFound
     integer,             intent(out), optional :: userRc
     integer,             intent(out), optional :: rc
STATUS:

DESCRIPTION:

Call into a user provided routine which is responsible for setting Component's Initialize(), Run(), and Finalize() services. The named userRoutine must exist in the executable, or in the shared object specified by sharedObj. In the latter case all of the platform specific details about dynamic linking and loading apply.

The arguments are:

cplcomp
Coupler Component.
userRoutine
Name of routine to be called, specified as a character string. The Component writer must supply a subroutine with the exact interface shown for userRoutine below. Arguments must not be declared as optional, and the types, intent and order must match. Prior to Fortran-2008, the subroutine must be either a module scope procedure, or an external procedure that has a matching interface block specified for it. An internal procedure which is contained within another procedure must not be used. From Fortran-2008 onwards, an internal procedure contained within either a main program or a module procedure may be used. If the internal procedure is contained within a module procedure, it is subject to initialization requirements. See: 16.4.8


INTERFACE:

       interface
         subroutine userRoutine(cplcomp, rc)
           type(ESMF_CplComp)   :: cplcomp    ! must not be optional
           integer, intent(out) :: rc         ! must not be optional
         end subroutine
       end interface
DESCRIPTION:

The userRoutine, when called by the framework, must make successive calls to ESMF_CplCompSetEntryPoint() to preset callback routines for standard Component Initialize(), Run(), and Finalize() methods.

[sharedObj]
Name of shared object that contains userRoutine. If the sharedObj argument is not provided the executable itself will be searched for userRoutine.
[userRoutineFound]
Report back whether the specified userRoutine was found and executed, or was not available. If this argument is present, not finding the userRoutine will not result in returning an error in rc. The default is to return an error if the userRoutine cannot be found.
[userRc]
Return code set by userRoutine before returning.
[rc]
Return code; equals ESMF_SUCCESS if there are no errors.

18.4.21 ESMF_CplCompSetServices - Set to serve as Dual Component for an Actual Component


INTERFACE:

   ! Private name; call using ESMF_CplCompSetServices()
   recursive subroutine ESMF_CplCompSetServicesComp(cplcomp, &
     actualCplcomp, rc)
ARGUMENTS:
     type(ESMF_CplComp), intent(inout)         :: cplcomp
     type(ESMF_CplComp), intent(in)            :: actualCplcomp
 -- The following arguments require argument keyword syntax (e.g. rc=rc). --
     integer,            intent(out), optional :: rc
DESCRIPTION:

Set the services of a Coupler Component to serve a "dual" Component for an "actual" Component. The component tunnel is VM based.

The arguments are:

cplcomp
Dual Coupler Component.
actualCplcomp
Actual Coupler Component.
[rc]
Return code; equals ESMF_SUCCESS if there are no errors.

18.4.22 ESMF_CplCompSetServices - Set to serve as Dual Component for an Actual Component through sockets


INTERFACE:

   ! Private name; call using ESMF_CplCompSetServices()
   recursive subroutine ESMF_CplCompSetServicesSock(cplcomp, port, &
     server, timeout, timeoutFlag, rc)
ARGUMENTS:
     type(ESMF_CplComp), intent(inout)         :: cplcomp
     integer,            intent(in)            :: port
 -- The following arguments require argument keyword syntax (e.g. rc=rc). --
     character(len=*),   intent(in),  optional :: server
     integer,            intent(in),  optional :: timeout
     logical,            intent(out), optional :: timeoutFlag
     integer,            intent(out), optional :: rc
DESCRIPTION:

Set the services of a Coupler Component to serve a "dual" Component for an "actual" Component. The component tunnel is socket based.

The arguments are:

cplcomp
Dual Coupler Component.
port
Port number under which the actual component is being served. The valid port range is [1024, 65535].
[server]
Server name where the actual component is being served. The default, i.e. if the server argument was not provided, is localhost.
[timeout]
The maximum period in seconds that this call will wait in communications with the actual component, before returning with a timeout condition. The default is 3600, i.e. 1 hour.
[timeoutFlag]
Returns .true. if the timeout was reached, .false. otherwise. If timeoutFlag was not provided, a timeout condition will lead to a return code of rc \= ESMF_SUCCESS. Otherwise the return value of timeoutFlag is the sole indicator of a timeout condition.
[rc]
Return code; equals ESMF_SUCCESS if there are no errors.

18.4.23 ESMF_CplCompSetVM - Call user routine to set CplComp VM properties


INTERFACE:

   recursive subroutine ESMF_CplCompSetVM(cplcomp, userRoutine, &
     userRc, rc)
ARGUMENTS:
     type(ESMF_CplComp), intent(inout)         :: cplcomp
     interface
       subroutine userRoutine(cplcomp, rc)
         use ESMF_CompMod
         implicit none
         type(ESMF_CplComp)         :: cplcomp  ! must not be optional
         integer, intent(out)       :: rc       ! must not be optional
       end subroutine
     end interface
 -- The following arguments require argument keyword syntax (e.g. rc=rc). --
     integer,            intent(out), optional :: userRc
     integer,            intent(out), optional :: rc
STATUS:

DESCRIPTION:

Optionally call into user provided userRoutine which is responsible for setting Component's VM properties.

The arguments are:

cplcomp
Coupler Component.
userRoutine
The Component writer must supply a subroutine with the exact interface shown above for the userRoutine argument. Arguments in userRoutine must not be declared as optional, and the types, intent and order must match. Prior to Fortran-2008, the subroutine must be either a module scope procedure, or an external procedure that has a matching interface block specified for it. An internal procedure which is contained within another procedure must not be used. From Fortran-2008 onwards, an internal procedure contained within either a main program or a module procedure may be used. If the internal procedure is contained within a module procedure, it is subject to initialization requirements. See: 16.4.8

The subroutine, when called by the framework, is expected to use any of the ESMF_CplCompSetVMxxx() methods to set the properties of the VM associated with the Coupler Component.

[userRc]
Return code set by userRoutine before returning.
[rc]
Return code; equals ESMF_SUCCESS if there are no errors.

18.4.24 ESMF_CplCompSetVM - Call user routine through name lookup, to set CplComp VM properties


INTERFACE:

   ! Private name; call using ESMF_CplCompSetVM()
   recursive subroutine ESMF_CplCompSetVMShObj(cplcomp, userRoutine, &
     sharedObj, userRc, rc)
ARGUMENTS:
     type(ESMF_CplComp),  intent(inout)         :: cplcomp
     character(len=*),    intent(in)            :: userRoutine
 -- The following arguments require argument keyword syntax (e.g. rc=rc). --
     character(len=*),    intent(in),  optional :: sharedObj
     integer,             intent(out), optional :: userRc
     integer,             intent(out), optional :: rc
STATUS:

DESCRIPTION:

Optionally call into user provided userRoutine which is responsible for setting Component's VM properties. The named userRoutine must exist in the executable, or in the shared object specified by sharedObj. In the latter case all of the platform specific details about dynamic linking and loading apply.

The arguments are:

cplcomp
Coupler Component.
userRoutine
Routine to be called, specified as a character string. The Component writer must supply a subroutine with the exact interface shown for userRoutine below. Arguments must not be declared as optional, and the types, intent and order must match. Prior to Fortran-2008, the subroutine must be either a module scope procedure, or an external procedure that has a matching interface block specified for it. An internal procedure which is contained within another procedure must not be used. From Fortran-2008 onwards, an internal procedure contained within either a main program or a module procedure may be used. If the internal procedure is contained within a module procedure, it is subject to initialization requirements. See: 16.4.8


INTERFACE:

       interface
         subroutine userRoutine(cplcomp, rc)
           type(ESMF_CplComp)   :: cplcomp     ! must not be optional
           integer, intent(out) :: rc          ! must not be optional
         end subroutine
       end interface
DESCRIPTION:

The subroutine, when called by the framework, is expected to use any of the ESMF_CplCompSetVMxxx() methods to set the properties of the VM associated with the Coupler Component.

[sharedObj]
Name of shared object that contains userRoutine. If the sharedObj argument is not provided the executable itself will be searched for userRoutine.
[userRc]
Return code set by userRoutine before returning.
[rc]
Return code; equals ESMF_SUCCESS if there are no errors.

18.4.25 ESMF_CplCompSetVMMaxPEs - Associate PEs with PETs in CplComp VM


INTERFACE:

   subroutine ESMF_CplCompSetVMMaxPEs(cplcomp, &
     maxPeCountPerPet, prefIntraProcess, prefIntraSsi, prefInterSsi, rc)
ARGUMENTS:
     type(ESMF_CplComp),  intent(inout)         :: cplcomp
 -- The following arguments require argument keyword syntax (e.g. rc=rc). --
     integer,             intent(in),  optional :: maxPeCountPerPet
     integer,             intent(in),  optional :: prefIntraProcess
     integer,             intent(in),  optional :: prefIntraSsi
     integer,             intent(in),  optional :: prefInterSsi
     integer,             intent(out), optional :: rc
DESCRIPTION:

Set characteristics of the ESMF_VM for this ESMF_CplComp. Attempts to associate up to maxPeCountPerPet PEs with each PET. Only PEs that are located on the same single system image (SSI) can be associated with the same PET. Within this constraint the call tries to get as close as possible to the number specified by maxPeCountPerPet.

The other constraint to this call is that the number of PEs is preserved. This means that the child Component in the end is associated with as many PEs as the parent Component provided to the child. The number of child PETs however is adjusted according to the above rule.

The typical use of ESMF_CplCompSetVMMaxPEs() is to allocate multiple PEs per PET in a Component for user-level threading, e.g. OpenMP.

The arguments are:

cplcomp
ESMF_CplComp to set the ESMF_VM for.
[maxPeCountPerPet]
Maximum number of PEs on each PET. Default for each SSI is the local number of PEs.
[prefIntraProcess]
Communication preference within a single process. Currently options not documented. Use default.
[prefIntraSsi]
Communication preference within a single system image (SSI). Currently options not documented. Use default.
[prefInterSsi]
Communication preference between different single system images (SSIs). Currently options not documented. Use default.
[rc]
Return code; equals ESMF_SUCCESS if there are no errors.

18.4.26 ESMF_CplCompSetVMMaxThreads - Set multi-threaded PETs in CplComp VM


INTERFACE:

   subroutine ESMF_CplCompSetVMMaxThreads(cplcomp, &
     maxPetCountPerVas, prefIntraProcess, prefIntraSsi, prefInterSsi, rc)
ARGUMENTS:
     type(ESMF_CplComp),  intent(inout)         :: cplcomp
 -- The following arguments require argument keyword syntax (e.g. rc=rc). --
     integer,             intent(in),  optional :: maxPetCountPerVas
     integer,             intent(in),  optional :: prefIntraProcess
     integer,             intent(in),  optional :: prefIntraSsi
     integer,             intent(in),  optional :: prefInterSsi
     integer,             intent(out), optional :: rc
DESCRIPTION:

Set characteristics of the ESMF_VM for this ESMF_CplComp. Attempts to provide maxPetCountPerVas threaded PETs in each virtual address space (VAS). Only as many threaded PETs as there are PEs located on the single system image (SSI) can be associated with the VAS. Within this constraint the call tries to get as close as possible to the number specified by maxPetCountPerVas.

The other constraint to this call is that the number of PETs is preserved. This means that the child Component in the end is associated with as many PETs as the parent Component provided to the child. The threading level of the child PETs however is adjusted according to the above rule.

The typical use of ESMF_CplCompSetVMMaxThreads() is to run a Component multi-threaded with groups of PETs executing within a common virtual address space.

The arguments are:

cplcomp
ESMF_CplComp to set the ESMF_VM for.
[maxPetCountPerVas]
Maximum number of threaded PETs in each virtual address space (VAS). Default for each SSI is the local number of PEs.
[prefIntraProcess]
Communication preference within a single process. Currently options not documented. Use default.
[prefIntraSsi]
Communication preference within a single system image (SSI). Currently options not documented. Use default.
[prefInterSsi]
Communication preference between different single system images (SSIs). Currently options not documented. Use default.
[rc]
Return code; equals ESMF_SUCCESS if there are no errors.

18.4.27 ESMF_CplCompSetVMMinThreads - Set a reduced threading level in CplComp VM


INTERFACE:

   subroutine ESMF_CplCompSetVMMinThreads(cplcomp, &
     maxPeCountPerPet, prefIntraProcess, prefIntraSsi, prefInterSsi, rc)
ARGUMENTS:
     type(ESMF_CplComp),  intent(inout)         :: cplcomp
 -- The following arguments require argument keyword syntax (e.g. rc=rc). --
     integer,             intent(in),  optional :: maxPeCountPerPet
     integer,             intent(in),  optional :: prefIntraProcess
     integer,             intent(in),  optional :: prefIntraSsi
     integer,             intent(in),  optional :: prefInterSsi
     integer,             intent(out), optional :: rc
DESCRIPTION:

Set characteristics of the ESMF_VM for this ESMF_CplComp. Reduces the number of threaded PETs in each VAS. The max argument may be specified to limit the maximum number of PEs that a single PET can be associated with.

Several constraints apply: 1) the number of PEs cannot change, 2) PEs cannot migrate between single system images (SSIs), 3) the number of PETs cannot increase, only decrease, 4) PETs cannot migrate between virtual address spaces (VASs), nor can VASs migrate between SSIs.

The typical use of ESMF_CplCompSetVMMinThreads() is to run a Component across a set of single-threaded PETs.

The arguments are:

cplcomp
ESMF_CplComp to set the ESMF_VM for.
[maxPeCountPerPet]
Maximum number of PEs on each PET. Default for each SSI is the local number of PEs.
[prefIntraProcess]
Communication preference within a single process. Currently options not documented. Use default.
[prefIntraSsi]
Communication preference within a single system image (SSI). Currently options not documented. Use default.
[prefInterSsi]
Communication preference between different single system images (SSIs). Currently options not documented. Use default.
[rc]
Return code; equals ESMF_SUCCESS if there are no errors.

18.4.28 ESMF_CplCompValidate - Ensure the CplComp is internally consistent


INTERFACE:

   subroutine ESMF_CplCompValidate(cplcomp, rc)
ARGUMENTS:
     type(ESMF_CplComp), intent(in)            :: cplcomp
 -- The following arguments require argument keyword syntax (e.g. rc=rc). --
     integer,            intent(out), optional :: rc
STATUS:

DESCRIPTION:

Currently all this method does is to check that the cplcomp was created.

The arguments are:

cplcomp
ESMF_CplComp to validate.
[rc]
Return code; equals ESMF_SUCCESS if there are no errors.

18.4.29 ESMF_CplCompWait - Wait for a CplComp to return


INTERFACE:

   subroutine ESMF_CplCompWait(cplcomp, syncflag, &
     timeout, timeoutFlag, userRc, rc)
ARGUMENTS:
     type(ESMF_CplComp),   intent(inout)         :: cplcomp
 -- The following arguments require argument keyword syntax (e.g. rc=rc). --
     type(ESMF_Sync_Flag), intent(in),  optional :: syncflag
     integer,              intent(in),  optional :: timeout
     logical,              intent(out), optional :: timeoutFlag
     integer,              intent(out), optional :: userRc
     integer,              intent(out), optional :: rc
STATUS:

DESCRIPTION:

When executing asynchronously, wait for an ESMF_CplComp to return.

The arguments are:

cplcomp
ESMF_CplComp to wait for.
[syncflag]
Blocking behavior of this method call. See section 52.56 for a list of valid blocking options. Default option is ESMF_SYNC_VASBLOCKING which blocks PETs and their spawned off threads across each VAS but does not synchronize PETs that run in different VASs.
[timeout]
The maximum period in seconds the actual component is allowed to execute a previously invoked component method before it must communicate back to the dual component. If the actual component does not communicate back in the specified time, a timeout condition is raised on the dual side (this side). The default is 3600, i.e. 1 hour. The timeout argument is only supported for connected dual components.
[timeoutFlag]
Returns .true. if the timeout was reached, .false. otherwise. If timeoutFlag was not provided, a timeout condition will lead to a return code of rc \= ESMF_SUCCESS. Otherwise the return value of timeoutFlag is the sole indicator of a timeout condition.
[userRc]
Return code set by userRoutine before returning.
[rc]
Return code; equals ESMF_SUCCESS if there are no errors.

18.4.30 ESMF_CplCompWriteRestart - Call the CplComp's write restart routine


INTERFACE:

   recursive subroutine ESMF_CplCompWriteRestart(cplcomp, &
     importState, exportState, clock, syncflag, phase, timeout, timeoutFlag, &
     userRc, rc)
ARGUMENTS:
     type(ESMF_CplComp),   intent(inout)           :: cplcomp
 -- The following arguments require argument keyword syntax (e.g. rc=rc). --
     type(ESMF_State),     intent(inout), optional :: importState
     type(ESMF_State),     intent(inout), optional :: exportState
     type(ESMF_Clock),     intent(inout), optional :: clock
     type(ESMF_Sync_Flag), intent(in),    optional :: syncflag
     integer,              intent(in),    optional :: phase
     integer,              intent(in),    optional :: timeout
     logical,              intent(out),   optional :: timeoutFlag
     integer,              intent(out),   optional :: userRc
     integer,              intent(out),   optional :: rc
STATUS:

DESCRIPTION:

Call the associated user write restart routine for an ESMF_CplComp.

The arguments are:

cplcomp
ESMF_CplComp to call run routine for.
[importState]
ESMF_State containing import data. If not present, a dummy argument will be passed to the user-supplied routine. The importState argument in the user code cannot be optional.
[exportState]
ESMF_State containing export data. If not present, a dummy argument will be passed to the user-supplied routine. The exportState argument in the user code cannot be optional.
[clock]
External ESMF_Clock for passing in time information. This is generally the parent component's clock, and will be treated as read-only by the child component. The child component can maintain a private clock for its own internal time computations. If not present, a dummy argument will be passed to the user-supplied routine. The clock argument in the user code cannot be optional.
[syncflag]
Blocking behavior of this method call. See section 52.56 for a list of valid blocking options. Default option is ESMF_SYNC_VASBLOCKING which blocks PETs and their spawned off threads across each VAS but does not synchronize PETs that run in different VASs.
[phase]
Component providers must document whether each of their routines are single-phase or multi-phase. Single-phase routines require only one invocation to complete their work. Multi-phase routines provide multiple subroutines to accomplish the work, accommodating components which must complete part of their work, return to the caller and allow other processing to occur, and then continue the original operation. For multiple-phase child components, this is the integer phase number to be invoked. For single-phase child components this argument is optional. The default is 1.
[timeout]
The maximum period in seconds that this call will wait in communications with the actual component, before returning with a timeout condition. The default is 3600, i.e. 1 hour. The timeout argument is only supported for connected dual components.
[timeoutFlag]
Returns .true. if the timeout was reached, .false. otherwise. If timeoutFlag was not provided, a timeout condition will lead to a return code of rc \= ESMF_SUCCESS. Otherwise the return value of timeoutFlag is the sole indicator of a timeout condition.
[userRc]
Return code set by userRoutine before returning.
[rc]
Return code; equals ESMF_SUCCESS if there are no errors.

19 SciComp Class

19.1 Description

In Earth system modeling, a particular piece of code representing a physical domain, such as an atmospheric model or an ocean model, is typically implemented as an ESMF Gridded Component, or ESMC_GridComp. However, there are times when physical domains, or realms, need to be represented, but aren't actual pieces of code, or software. These domains can be implemented as ESMF Science Components, or ESMC_SciComp.

Unlike Gridded and Coupler Components, Science Components are not associated with software; they don't include execution routines such as initialize, run and finalize. The main purpose of a Science Component is to provide a container for Attributes within a Component hierarchy.

19.2 Use and Examples

A Science Component is a container object intended to represent scientific domains, or realms, in an Earth Science Model. It's primary purpose is to provide a means for representing Component metadata within a hierarchy of Components, and it does this by being a container for Attributes as well as other Components.


19.2.1 Use ESMF_SciComp and Attach Attributes

This example illustrates the use of the ESMF_SciComp to attach Attributes within a Component hierarchy. The hierarchy includes Coupler, Gridded, and Science Components and Attributes are attached to the Science Components. For demonstrable purposes, we'll add some CIM Component attributes to the Gridded Component. However, for a complete example of the CIM Attribute packages supplied by ESMF, see the example in the ESMF Attributes section 39.7.6.

Create the top 2 levels of the Component hierarchy. This example creates a parent Coupler Component and 2 Gridded Components as children.

      ! Create top-level Coupler Component
      cplcomp = ESMF_CplCompCreate(name="coupler_component", rc=rc)

      ! Create Gridded Component for Atmosphere
      atmcomp = ESMF_GridCompCreate(name="Atmosphere", rc=rc)

      ! Create Gridded Component for Ocean
      ocncomp = ESMF_GridCompCreate(name="Ocean", rc=rc)

      ! Link the attributes for the parent and child components
      call ESMF_AttributeLink(cplcomp, atmcomp, rc=rc)
      call ESMF_AttributeLink(cplcomp, ocncomp, rc=rc)

Now add CIM Attribute packages to the Component. Also, add a CIM Component Properties package, to contain two custom attributes.

      convCIM = 'CIM 1.5'
      purpComp = 'ModelComp'
      purpProp = 'CompProp'
      purpField = 'Inputs'
      purpPlatform = 'Platform'

      convISO = 'ISO 19115'
      purpRP = 'RespParty'
      purpCitation = 'Citation'

      ! Add CIM Attribute package to the Science Component
      call ESMF_AttributeAdd(atmcomp, convention=convCIM, &
        purpose=purpComp, attpack=attpack, rc=rc)

The Attribute package can also be retrieved in a multi-Component setting like this:

      call ESMF_AttributeGetAttPack(atmcomp, convCIM, purpComp, &
                                    attpack=attpack, rc=rc)

Now, add some CIM Component attributes to the Atmosphere Grid Component.

      !
      ! Top-level model component attributes, set on gridded component
      !
      call ESMF_AttributeSet(atmcomp, 'ShortName', 'EarthSys_Atmos', &
        attpack=attpack, rc=rc)

      call ESMF_AttributeSet(atmcomp, 'LongName', &
        'Earth System High Resolution Global Atmosphere Model', &
        attpack=attpack, rc=rc)

      call ESMF_AttributeSet(atmcomp, 'Description', &
        'EarthSys brings together expertise from the global ' // &
        'community in a concerted effort to develop coupled ' // &
        'climate models with increased horizontal resolutions.  ' // &
        'Increasing the horizontal resolution of coupled climate ' // &
        'models will allow us to capture climate processes and ' // &
        'weather systems in much greater detail.', &
        attpack=attpack, rc=rc)

      call ESMF_AttributeSet(atmcomp, 'Version', '2.0', &
        attpack=attpack, rc=rc)

      call ESMF_AttributeSet(atmcomp, 'ReleaseDate', '2009-01-01T00:00:00Z', &
        attpack=attpack, rc=rc)

      call ESMF_AttributeSet(atmcomp, 'ModelType', 'aerosol', &
        attpack=attpack, rc=rc)

      call ESMF_AttributeSet(atmcomp, 'URL', &
        'www.earthsys.org', attpack=attpack, rc=rc)

Now create a set of Science Components as a children of the Atmosphere Gridded Component. The hierarchy is as follows:

After each Component is created, we need to link it with its parent Component. We then add some standard CIM Component properties as well as Scientific Properties to each of these components.

    !
    ! Atmosphere Dynamical Core Science Component
    !
    dc_scicomp = ESMF_SciCompCreate(name="AtmosDynamicalCore", rc=rc)

    call ESMF_AttributeLink(atmcomp, dc_scicomp, rc=rc)

    call ESMF_AttributeAdd(dc_scicomp,  &
                           convention=convCIM, purpose=purpComp, &
                           attpack=attpack, rc=rc)

    call ESMF_AttributeSet(dc_scicomp, "ShortName", "AtmosDynamicalCore", &
                           attpack=attpack, rc=rc)
    call ESMF_AttributeSet(dc_scicomp, "LongName", &
                           "Atmosphere Dynamical Core", &
                           attpack=attpack, rc=rc)

    purpSci = 'SciProp'

    dc_sciPropAtt(1) = 'TopBoundaryCondition'
    dc_sciPropAtt(2) = 'HeatTreatmentAtTop'
    dc_sciPropAtt(3) = 'WindTreatmentAtTop'

    call ESMF_AttributeAdd(dc_scicomp,  &
                           convention=convCIM, purpose=purpSci, &
                           attrList=dc_sciPropAtt, &
                           attpack=attpack, rc=rc)

    call ESMF_AttributeSet(dc_scicomp, 'TopBoundaryCondition', &
                           'radiation boundary condition', &
                           attpack=attpack, rc=rc)
    call ESMF_AttributeSet(dc_scicomp, 'HeatTreatmentAtTop', &
                           'some heat treatment', &
                           attpack=attpack, rc=rc)
    call ESMF_AttributeSet(dc_scicomp, 'WindTreatmentAtTop', &
                           'some wind treatment', &
                           attpack=attpack, rc=rc)

    !
    ! Atmosphere Advection Science Component
    !
    adv_scicomp = ESMF_SciCompCreate(name="AtmosAdvection", rc=rc)

    call ESMF_AttributeLink(dc_scicomp, adv_scicomp, rc=rc)

    call ESMF_AttributeAdd(adv_scicomp,  &
                           convention=convCIM, purpose=purpComp, &
                           attpack=attpack, rc=rc)

    call ESMF_AttributeSet(adv_scicomp, "ShortName", "AtmosAdvection", &
                           attpack=attpack, rc=rc)
    call ESMF_AttributeSet(adv_scicomp, "LongName", "Atmosphere Advection", &
                           attpack=attpack, rc=rc)

    adv_sciPropAtt(1) = 'TracersSchemeName'
    adv_sciPropAtt(2) = 'TracersSchemeCharacteristics'
    adv_sciPropAtt(3) = 'MomentumSchemeName'

    call ESMF_AttributeAdd(adv_scicomp,  &
                           convention=convCIM, purpose=purpSci, &
                           attrList=adv_sciPropAtt, &
                           attpack=attpack, rc=rc)

    call ESMF_AttributeSet(adv_scicomp, 'TracersSchemeName', 'Prather', &
                           attpack=attpack, rc=rc)
    call ESMF_AttributeSet(adv_scicomp, 'TracersSchemeCharacteristics', &
                           'modified Euler', &
                           attpack=attpack, rc=rc)
    call ESMF_AttributeSet(adv_scicomp, 'MomentumSchemeName', 'Van Leer', &
                           attpack=attpack, rc=rc)

    !
    ! Atmosphere Radiation Science Component
    !
    rad_scicomp = ESMF_SciCompCreate(name="AtmosRadiation", rc=rc)

    call ESMF_AttributeLink(atmcomp, rad_scicomp, rc=rc)

    call ESMF_AttributeAdd(rad_scicomp,  &
                           convention=convCIM, purpose=purpComp, &
                           attpack=attpack, rc=rc)

    call ESMF_AttributeSet(rad_scicomp, "ShortName", "AtmosRadiation", &
                           attpack=attpack, rc=rc)
    call ESMF_AttributeSet(rad_scicomp, "LongName", &
                           "Atmosphere Radiation", &
                           attpack=attpack, rc=rc)

    rad_sciPropAtt(1) = 'LongwaveSchemeType'
    rad_sciPropAtt(2) = 'LongwaveSchemeMethod'

    call ESMF_AttributeAdd(rad_scicomp,  &
                           convention=convCIM, purpose=purpSci, &
                           attrList=rad_sciPropAtt, &
                           attpack=attpack, rc=rc)

    call ESMF_AttributeSet(rad_scicomp, &
                           'LongwaveSchemeType', &
                           'wide-band model', &
                           attpack=attpack, rc=rc)
    call ESMF_AttributeSet(rad_scicomp, &
                           'LongwaveSchemeMethod', &
                           'two-stream', &
                           attpack=attpack, rc=rc)

Write the entire CIM Attribute hierarchy, beginning at the top of the Component hierarchy (the Coupler Component), to an XML file formatted to conform to CIM specifications. The file is written to the examples execution directory.

        call ESMF_AttributeWrite(cplcomp, convCIM, purpComp, &
          attwriteflag=ESMF_ATTWRITE_XML,rc=rc)

Finally, destroy all of the Components.

      call ESMF_SciCompDestroy(rad_scicomp, rc=rc)
      call ESMF_SciCompDestroy(adv_scicomp, rc=rc)
      call ESMF_SciCompDestroy(dc_scicomp, rc=rc)
      call ESMF_GridCompDestroy(atmcomp, rc=rc)
      call ESMF_GridCompDestroy(ocncomp, rc=rc)
      call ESMF_CplCompDestroy(cplcomp, rc=rc)

19.3 Restrictions and Future Work

  1. None.

19.4 Class API

19.4.1 ESMF_SciCompAssignment(=) - SciComp assignment


INTERFACE:

     interface assignment(=)
     scicomp1 = scicomp2
ARGUMENTS:
     type(ESMF_SciComp) :: scicomp1
     type(ESMF_SciComp) :: scicomp2
DESCRIPTION:

Assign scicomp1 as an alias to the same ESMF SciComp object in memory as scicomp2. If scicomp2 is invalid, then scicomp1 will be equally invalid after the assignment.

The arguments are:

scicomp1
The ESMF_SciComp object on the left hand side of the assignment.
scicomp2
The ESMF_SciComp object on the right hand side of the assignment.

19.4.2 ESMF_SciCompOperator(==) - SciComp equality operator


INTERFACE:

   interface operator(==)
     if (scicomp1 == scicomp2) then ... endif
               OR
     result = (scicomp1 == scicomp2)
RETURN VALUE:
     logical :: result
ARGUMENTS:
     type(ESMF_SciComp), intent(in) :: scicomp1
     type(ESMF_SciComp), intent(in) :: scicomp2
DESCRIPTION:

Test whether scicomp1 and scicomp2 are valid aliases to the same ESMF SciComp object in memory. For a more general comparison of two ESMF SciComps, going beyond the simple alias test, the ESMF_SciCompMatch() function (not yet implemented) must be used.

The arguments are:

scicomp1
The ESMF_SciComp object on the left hand side of the equality operation.
scicomp2
The ESMF_SciComp object on the right hand side of the equality operation.

19.4.3 ESMF_SciCompOperator(/=) - SciComp not equal operator


INTERFACE:

   interface operator(/=)
     if (scicomp1 /= scicomp2) then ... endif
               OR
     result = (scicomp1 /= scicomp2)
RETURN VALUE:
     logical :: result
ARGUMENTS:
     type(ESMF_SciComp), intent(in) :: scicomp1
     type(ESMF_SciComp), intent(in) :: scicomp2
DESCRIPTION:

Test whether scicomp1 and scicomp2 are not valid aliases to the same ESMF SciComp object in memory. For a more general comparison of two ESMF SciComps, going beyond the simple alias test, the ESMF_SciCompMatch() function (not yet implemented) must be used.

The arguments are:

scicomp1
The ESMF_SciComp object on the left hand side of the non-equality operation.
scicomp2
The ESMF_SciComp object on the right hand side of the non-equality operation.

19.4.4 ESMF_SciCompCreate - Create a SciComp


INTERFACE:

   recursive function ESMF_SciCompCreate(name, rc)
RETURN VALUE:
     type(ESMF_SciComp) :: ESMF_SciCompCreate
ARGUMENTS:
 -- The following arguments require argument keyword syntax (e.g. rc=rc). --
     character(len=*),        intent(in),    optional :: name
     integer,                 intent(out),   optional :: rc
DESCRIPTION:

This interface creates an ESMF_SciComp object. The return value is the new ESMF_SciComp.

The arguments are:

[name]
Name of the newly-created ESMF_SciComp. This name can be altered from within the ESMF_SciComp code once the initialization routine is called.
[rc]
Return code; equals ESMF_SUCCESS if there are no errors.

19.4.5 ESMF_SciCompDestroy - Release resources associated with a SciComp


INTERFACE:

   subroutine ESMF_SciCompDestroy(scicomp, rc)
ARGUMENTS:
     type(ESMF_SciComp), intent(inout)           :: scicomp
 -- The following arguments require argument keyword syntax (e.g. rc=rc). --
     integer,             intent(out),  optional :: rc
DESCRIPTION:

Destroys an ESMF_SciComp, releasing the resources associated with the object.

The arguments are:

scicomp
Release all resources associated with this ESMF_SciComp and mark the object as invalid. It is an error to pass this object into any other routines after being destroyed.
[rc]
Return code; equals ESMF_SUCCESS if there are no errors.

19.4.6 ESMF_SciCompGet - Get SciComp information


INTERFACE:

   subroutine ESMF_SciCompGet(scicomp, name, rc)
ARGUMENTS:
     type(ESMF_SciComp),       intent(in)            :: scicomp
 -- The following arguments require argument keyword syntax (e.g. rc=rc). --
     character(len=*),         intent(out), optional :: name
     integer,                  intent(out), optional :: rc
DESCRIPTION:

Get information about an ESMF_SciComp object.

The arguments are:

scicomp
The ESMF_SciComp object being queried.
[name]
Return the name of the ESMF_SciComp.
[rc]
Return code; equals ESMF_SUCCESS if there are no errors.

19.4.7 ESMF_SciCompIsCreated - Check whether a SciComp object has been created


INTERFACE:

   function ESMF_SciCompIsCreated(scicomp, rc)
RETURN VALUE:
     logical :: ESMF_SciCompIsCreated
ARGUMENTS:
     type(ESMF_SciComp), intent(in)            :: scicomp
 -- The following arguments require argument keyword syntax (e.g. rc=rc). --
     integer,             intent(out), optional :: rc
DESCRIPTION:

Return .true. if the scicomp has been created. Otherwise return .false.. If an error occurs, i.e. rc /= ESMF_SUCCESS is returned, the return value of the function will also be .false..

The arguments are:

scicomp
ESMF_SciComp queried.
[rc]
Return code; equals ESMF_SUCCESS if there are no errors.

19.4.8 ESMF_SciCompPrint - Print SciComp information


INTERFACE:

   subroutine ESMF_SciCompPrint(scicomp, rc)
ARGUMENTS:
     type(ESMF_SciComp), intent(in)             :: scicomp
 -- The following arguments require argument keyword syntax (e.g. rc=rc). --
     integer,             intent(out), optional :: rc
DESCRIPTION:

Prints information about an ESMF_SciComp to stdout.

The arguments are:

scicomp
ESMF_SciComp to print.
[rc]
Return code; equals ESMF_SUCCESS if there are no errors.

19.4.9 ESMF_SciCompSet - Set or reset information about the SciComp


INTERFACE:

   subroutine ESMF_SciCompSet(scicomp, name, rc)
ARGUMENTS:
     type(ESMF_SciComp), intent(inout)          :: scicomp
 -- The following arguments require argument keyword syntax (e.g. rc=rc). --
     character(len=*),    intent(in),  optional :: name
     integer,             intent(out), optional :: rc
DESCRIPTION:

Sets or resets information about an ESMF_SciComp.

The arguments are:

scicomp
ESMF_SciComp to change.
[name]
Set the name of the ESMF_SciComp.
[rc]
Return code; equals ESMF_SUCCESS if there are no errors.

19.4.10 ESMF_SciCompValidate - Check validity of a SciComp


INTERFACE:

   subroutine ESMF_SciCompValidate(scicomp, rc)
ARGUMENTS:
     type(ESMF_SciComp), intent(in)             :: scicomp
 -- The following arguments require argument keyword syntax (e.g. rc=rc). --
     integer,             intent(out), optional :: rc
DESCRIPTION:

Currently all this method does is to check that the scicomp was created.

The arguments are:

scicomp
ESMF_SciComp to validate.
[rc]
Return code; equals ESMF_SUCCESS if there are no errors.

20 Fault-tolerant Component Tunnel

20.1 Description

For ensemble runs with many ensemble members, fault-tolerance becomes an issue of very critical practical impact. The meaning of fault-tolerance in this context refers to the ability of an ensemble application to continue with normal execution after one or more ensemble members have experienced catastrophic conditions, from which they cannot recover. ESMF implements this type of fault-tolerance on the Component level via a timeout paradigm: A timeout parameter is specified for all interactions that need to be fault-tolerant. When a connection to a component times out, maybe because it has become inaccessible due to some catastrophic condition, the driver application can react to this condition, for example by not further interacting with the component during the otherwise normal continuation of the model execution.

The fault-tolerant connection between a driver application and a Component is established through a Component Tunnel. There are two sides to a Component Tunnel: the "actual" side is where the component is actually executing, and the "dual" side is the portal through which the Component becomes accessible on the driver side. Both the actual and the dual side of a Component Tunnel are implemented in form of a regular ESMF Gridded or Coupler Component.

Component Tunnels between Components can be based on a number of low level implementations. The only implementation that currently provides fault-tolerance is socket based. In this case an actual Component typically runs as a separate executable, listening to a specific port for connections from the driver application. The dual Component is created on the driver side. It connects to the actual Component during the SetServices() call.

20.2 Use and Examples

A Component Tunnel connects a dual Component to an actual Component. This connection can be based on a number of different low level implementations, e.g. VM-based or socket-based. VM-based Component Tunnels require that both dual and actual Components run within the same application (i.e. execute under the same MPI_COMM_WORLD). Fault-tolerant Component Tunnels require that dual and actual Components run in separate applications, under different MPI_COMM_WORLD communicators. This mode is implemented in the socket-based Component Tunnels.

20.2.1 Creating an actual Component

The creation process of an actual Gridded Component, which will become one of the two end points of a Component Tunnel, is identical to the creation of a regular Gridded Component. On the actual side, an actual Component is very similar to a regular Component. Here the actual Component is created with a custom petList.

  petList = (/0,1,2/)
  actualComp = ESMF_GridCompCreate(petList=petList, name="actual", rc=rc)

20.2.2 Creating a dual Component

The same way an actual Component appears as a regular Component in the context of the actual side application, a dual Component is created as a regular Component on the dual side. A dual Gridded Component with custom petList is created using the regular create call.

  petList = (/4,3,5/)
  dualComp = ESMF_GridCompCreate(petList=petList, name="dual", rc=rc)

20.2.3 Setting up the actual side of a Component Tunnel

After creation, the regular procedure for registering the standard Component methods is followed for the actual Gridded Component.

  call ESMF_GridCompSetServices(actualComp, userRoutine=setservices, &
    userRc=userRc, rc=rc)

So far the actualComp object is no different from a regular Gridded Component. In order to turn it into the actual end point of a Component Tunnel the ServiceLoop() method is called. Here the socket-based implementation is chosen.

  call ESMF_GridCompServiceLoop(actualComp, port=61010, timeout=20, rc=rc)

This call opens the actual side of the Component Tunnel in form of a socket-based server, listening on port 61010. The timeout argument specifies how long the actual side will wait for the dual side to connect, before the actual side returns with a time out condition. The time out is set to 20 seconds.

At this point, before a dual Component connects to the other side of the Component Tunnel, it is possible to manually connect to the waiting actual Component. This can be useful when debugging connection issues. A convenient tool for this is the standard telnet application. Below is a transcript of such a connection. The manually typed commands are separate from the previous responses by a blank line.

   $ telnet localhost 61010
   Trying 127.0.0.1...
   Connected to localhost.
   Escape character is '^]'.
   Hello from ESMF Actual Component server!
  
   date
   Tue Apr  3 21:53:03 2012
   
   version
   ESMF_VERSION_STRING: 5.3.0

If at any point the telnet session is manually shut down, the ServiceLoop() on the actual side will return with an error condition. The clean way to disconnect the telnet session, and to have the ServiceLoop() wait for a new connection, e.g. from a dual Component, is to send the reconnect command. This will automatically shut down the telnet connection.

   reconnect
   Actual Component server will reconnect now!
   Connection closed by foreign host.
   $

At this point the actual Component is back in listening mode, with a time out of 20 seconds, as specified during the ServiceLoop() call.

Before moving on to the dual side of the GridComp based Component Tunnel example, it should be pointed out that the exact same procedure is used to set up the actual side of a CplComp based Component Tunnel. Assuming that actualCplComp is a CplComp object for which SetServices has already been called, the actual side uses ESMF_CplCompServiceLoop() to start listening for connections from the dual side.

  call ESMF_CplCompServiceLoop(actualCplComp, port=61011, timeout=2, &
    timeoutFlag=timeoutFlag, rc=rc)

Here the timeoutFlag is specified in order to prevent the expected time-out condition to be indicated through the return code. Instead, when timeoutFlag is present, the return code is still ESMF_SUCCESS, but timeoutFlag is set to .true. when a time-out occurs.

20.2.4 Setting up the dual side of a Component Tunnel

On the dual side, the dualComp object needs to be connected to the actual Component in order to complete the Component Tunnel. Instead of registering standard Component methods locally, a special variant of the SetServices() call is used to connect to the actual Component.

  call ESMF_GridCompSetServices(dualComp, port=61010, server="localhost", &
    timeout=10, timeoutFlag=timeoutFlag, rc=rc)

The port and server arguments are used to connect to the desired actual Component. The time out of 10 seconds ensures that if the actual Component is not available, a time out condition is returned instead of resulting in a hang. The timeoutFlag argument further absorbs the time out condition, either returning as .true. or .false.. In this mode the standard rc will indicate success even when a time out condition was reached.

20.2.5 Invoking standard Component methods through a Component Tunnel

Once a Component Tunnel is established, the actual Component is fully under the control of the dual Component. A standard Component method invoked on the dual Component is not executed by the dual Component itself, but by the actual Component instead. In fact, it is the entry points registered with the actual Component that are executed when standard methods are invoked on the dual Component. The connected dualComp object serves as a portal through which the connected actualComp becomes accessible on the dual side.

Typically the first standard method called is the CompInitialize() routine.

  call ESMF_GridCompInitialize(dualComp, timeout=10, timeoutFlag=timeoutFlag, &
    userRc=userRc, rc=rc)

Again, the timeout argument serves to prevent the dual side from hanging if the actual Component application has experienced a catastrophic condition and is no longer available, or takes longer than expected. The presence of the timeoutFlag allows time out conditions to be caught gracefully, so the dual side can deal with it in an orderly fashion, instead of triggering an application abort due to an error condition.

The CompRun() and CompFinalize() methods follow the same format.

  call ESMF_GridCompRun(dualComp, timeout=10, timeoutFlag=timeoutFlag, &
    userRc=userRc, rc=rc)

  call ESMF_GridCompFinalize(dualComp, timeout=10, timeoutFlag=timeoutFlag, &
    userRc=userRc, rc=rc)

20.2.6 The non-blocking option to invoke standard Component methods through a Component Tunnel

Standard Component methods called on a connected dual Component are executed on the actual side, across the PETs of the actual Component. By default the dual Component PETs are blocked until the actual Component has finished executing the invoked Component method, or until a time out condition has been reached. In many practical applications a more loose synchronization between dual and actual Components is useful. Having the PETs of a dual Component return immediately from a standard Component method allows multiple dual Component, on the same PETs, to control multiple actual Components. If the actual Components are executing in separate executables, or the same executable but on exclusive sets of PETs, they can execute concurrently, even with the controlling dual Components all running on the same PETs. The non-blocking dual side regains control over the actual Component by synchronizing through the CompWait() call.

Any of the standard Component methods can be called in non-blocking mode by setting the optional syncflag argument to ESMF_SYNC_NONBLOCKING.

  call ESMF_GridCompInitialize(dualComp, syncflag=ESMF_SYNC_NONBLOCKING, rc=rc)

If communication between the dual and the actual Component was successful, this call will return immediately on all of the dual Component PETs, while the actual Component continues to execute the invoked Component method. However, if the dual Component has difficulties reaching the actual Component, the call will block on all dual PETs until successful contact was made, or the default time out (3600 seconds, i.e. 1 hour) has been reached. In most cases a shorter time out condition is desired with the non-blocking option, as shown below.

First the dual Component must wait for the outstanding method.

  call ESMF_GridCompWait(dualComp, rc=rc)

Now the same non-blocking CompInitialize() call is issued again, but this time with an explicit 10 second time out.

  call ESMF_GridCompInitialize(dualComp, syncflag=ESMF_SYNC_NONBLOCKING, &
    timeout=10, timeoutFlag=timeoutFlag, rc=rc)

This call is guaranteed to return within 10 seconds, or less, on the dual Component PETs, either without time out condition, indicating that the actual Component has been contacted successfully, or with time out condition, indicating that the actual Component was unreachable at the time. Either way, the dual Component PETs are back under user control quickly.

Calling the CompWait() method on the dual Component causes the dual Component PETs to block until the actual Component method has returned, or a time out condition has been reached.

  call ESMF_GridCompWait(dualComp, userRc=userRc, rc=rc)

The default time out for CompWait() is 3600 seconds, i.e. 1 hour, just like for the other Component methods. However, the semantics of a time out condition under CompWait() is different from the other Component methods. Typically the timeout is simply the maximum time that any communication between dual and actual Component is allowed to take before a time out condition is raised. For CompWait(), the timeout is the maximum time that an actual Component is allowed to execute before reporting back to the dual Component. Here, even with the default time out, the dual Component would return from CompWait() immediately with a time out condition if the actual Component has already been executing for over 1 hour, and is not already waiting to report back when the dual Component calls CompWait(). On the other hand, if it has only been 30 minutes since CompInitialize() was called on the dual Component, then the actual Component still has 30 minutes before CompWait() returns with a time out condition. During this time (or until the actual Component returns) the dual Component PETs are blocked.

A standard Component method is invoked in non-blocking mode.

  call ESMF_GridCompRun(dualComp, syncflag=ESMF_SYNC_NONBLOCKING, &
    timeout=10, timeoutFlag=timeoutFlag, rc=rc)

Once the user code on the dual side is ready to regain control over the actual Component it calls CompWait() on the dual Component. Here a timeout of 60s is specified, meaning that the total execution time the actual Component spends in the registered Run() routine may not exceed 60s before CompWait() returns with a time out condition.

  call ESMF_GridCompWait(dualComp, timeout=60, userRc=userRc, rc=rc)

20.2.7 Destroying a connected dual Component

A dual Component that is connected to an actual Component through a Component Tunnel is destroyed the same way a regular Component is. The only difference is that a connected dual Component may specify a timeout argument to the CompDestroy() call.

  call ESMF_GridCompDestroy(dualComp, timeout=10, rc=rc)

The timeout argument again ensures that the dual side does not hang indefinitely in case the actual Component has become unavailable. If the actual Component is available, the destroy call will indicate to the actual Component that it should break out of the ServiceLoop(). Either way, the local dual Component is destroyed.

20.2.8 Destroying a connected actual Component

An actual Component that is in a ServiceLoop() must first return from that call before it can be destroyed. This can either happen when a connected dual Component calls its CompDestroy() method, or if the ServiceLoop() reaches the specified time out condition. Either way, once control has been returned to the user code, the actual Component is destroyed in the same way a regular Component is, by calling the destroy method.

  call ESMF_GridCompDestroy(actualComp, rc=rc)

20.3 Restrictions and Future Work

  1. No data flow through States. The current implementation does not support data flow (Fields, FieldBundles, etc.) between actual and dual Components. The current work-around is to employ user controlled, file based transfer methods. The next implementation phase will offer transparent data flow through the Component Tunnel, where the user code interacts with the States on the actual and dual side in the same way as if they were the same Component.

21 State Class

21.1 Description

A State contains the data and metadata to be transferred between ESMF Components. It is an important class, because it defines a standard for how data is represented in data transfers between Earth science components. The State construct is a rational compromise between a fully prescribed interface - one that would dictate what specific fields should be transferred between components - and an interface in which data structures are completely ad hoc.

There are two types of States, import and export. An import State contains data that is necessary for a Gridded Component or Coupler Component to execute, and an export State contains the data that a Gridded Component or Coupler Component can make available.

States can contain Arrays, ArrayBundles, Fields, FieldBundles, and other States. They cannot directly contain native language arrays (i.e. Fortran or C style arrays). Objects in a State must span the VM on which they are running. For sequentially executing components which run on the same set of PETs this happens by calling the object create methods on each PET, creating the object in unison. For concurrently executing components which are running on subsets of PETs, an additional method, called ESMF_StateReconcile(), is provided by ESMF to broadcast information about objects which were created in sub-components.

State methods include creation and deletion, adding and retrieving data items, adding and retrieving attributes, and performing queries.

21.2 Constants


21.2.1 ESMF_STATEINTENT

DESCRIPTION:
Specifies whether a ESMF_State contains data to be imported into a component or exported from a component.

The type of this flag is:

type(ESMF_StateIntent_Flag)

The valid values are:

ESMF_STATEINTENT_IMPORT
Contains data to be imported into a component.
ESMF_STATEINTENT_EXPORT
Contains data to be exported out of a component.
ESMF_STATEINTENT_UNSPECIFIED
The intent has not been specified.


21.2.2 ESMF_STATEITEM

DESCRIPTION:
Specifies the type of object being added to or retrieved from an ESMF_State.

The type of this flag is:

type(ESMF_StateItem_Flag)

The valid values are:

ESMF_STATEITEM_ARRAY
Refers to an ESMF_Array within an ESMF_State.
ESMF_STATEITEM_ARRAYBUNDLE
Refers to an ESMF_Array within an ESMF_State.
ESMF_STATEITEM_FIELD
Refers to a ESMF_Field within an ESMF_State.
ESMF_STATEITEM_FIELDBUNDLE
Refers to a ESMF_FieldBundle within an ESMF_State.
ESMF_STATEITEM_ROUTEHANDLE
Refers to a ESMF_RouteHandle within an ESMF_State.
ESMF_STATEITEM_STATE
Refers to a ESMF_State within an ESMF_State.

21.3 Use and Examples

A Gridded Component generally has one associated import State and one export State. Generally the States associated with a Gridded Component will be created by the Gridded Component's parent component. In many cases, the States will be created containing no data. Both the empty States and the newly created Gridded Component are passed by the parent component into the Gridded Component's initialize method. This is where the States get prepared for use and the import State is first filled with data.

States can be filled with data items that do not yet have data allocated. Fields, FieldBundles, Arrays, and ArrayBundles each have methods that support their creation without actual data allocation - the Grid and Attributes are set up but no Fortran array of data values is allocated. In this approach, when a State is passed into its associated Gridded Component's initialize method, the incomplete Arrays, Fields, FieldBundles, and ArrayBundles within the State can allocate or reference data inside the initialize method.

States are passed through the interfaces of the Gridded and Coupler Components' run methods in order to carry data between the components. While we expect a Gridded Component's import State to be filled with data during initialization, its export State will typically be filled over the course of its run method. At the end of a Gridded Component's run method, the filled export State is passed out through the argument list into a Coupler Component's run method. We recommend the convention that it enters the Coupler Component as the Coupler Component's import State. Here is it transformed into a form that another Gridded Component requires, and passed out of the Coupler Component as its export State. It can then be passed into the run method of a recipient Gridded Component as that component's import State.

While the above sounds complicated, the rule is simple: a State going into a component is an import State, and a State leaving a component is an export State.

Objects inside States are normally created in unison where each PET executing a component makes the same object create call. If the object contains data, like a Field, each PET may have a different local chunk of the entire dataset but each Field has the same name and is logically one part of a single distributed object. As States are passed between components, if any object in a State was not created in unison on all the current PETs then some PETs have no object to pass into a communication method (e.g. regrid or data redistribution). The ESMF_StateReconcile() method must be called to broadcast information about these objects to all PETs in a component; after which all PETs have a single uniform view of all objects and metadata.

If components are running in sequential mode on all available PETs and States are being passed between them there is no need to call ESMF_StateReconcile since all PETs have a uniform view of the objects. However, if components are running on a subset of the PETs, as is usually the case when running in concurrent mode, then when States are passed into components which contain a superset of those PETs, for example, a Coupler Component, all PETs must call ESMF_StateReconcile on the States before using them in any ESMF communication methods. The reconciliation process broadcasts information about objects which exist only on a subset of the PETs. On PETs missing those objects it creates a proxy object which contains any qualities of the original object plus enough information for it to be a data source or destination for a regrid or data redistribution operation. There is an option to turn off metadata reconciliation in the ESMF_StateReconcile call.

21.3.1 State create and destroy

States can be created and destroyed at any time during application execution. The ESMF_StateCreate() routine can take many different combinations of optional arguments. Refer to the API description for all possible methods of creating a State. An empty State can be created by providing only a name and type for the intended State:

state = ESMF_StateCreate(name, stateintent=ESMF_STATEINTENT_IMPORT, rc=rc)

When finished with an ESMF_State, the ESMF_StateDestroy method removes it. However, the objects inside the ESMF_State created externally should be destroyed separately, since objects can be added to more than one ESMF_State.

21.3.2 Add items to a State

Creation of an empty ESMF_State, and adding an ESMF_FieldBundle to it. Note that the ESMF_FieldBundle does not get destroyed when the ESMF_State is destroyed; the ESMF_State only contains a reference to the objects it contains. It also does not make a copy; the original objects can be updated and code accessing them by using the ESMF_State will see the updated version.

    statename = "Ocean"
    state2 = ESMF_StateCreate(name=statename,  &
                              stateintent=ESMF_STATEINTENT_EXPORT, rc=rc)

    bundlename = "Temperature"
    bundle1 = ESMF_FieldBundleCreate(name=bundlename, rc=rc)
    print *, "FieldBundle Create returned", rc

    call ESMF_StateAdd(state2, (/bundle1/), rc=rc)
    print *, "StateAdd returned", rc

    call ESMF_StateDestroy(state2, rc=rc)

    call ESMF_FieldBundleDestroy(bundle1, rc=rc)

21.3.3 Add placeholders to a State

If a component could potentially produce a large number of optional items, one strategy is to add the names only of those objects to the ESMF_State. Other components can call framework routines to set the ESMF_NEEDED flag to indicate they require that data. The original component can query this flag and then produce only the data that is required by another component.

    statename = "Ocean"
    state3 = ESMF_StateCreate(name=statename,  &
                              stateintent=ESMF_STATEINTENT_EXPORT, rc=rc)

    dataname = "Downward wind:needed"
    call ESMF_AttributeSet (state3, dataname, .false., rc=rc)

    dataname = "Humidity:needed"
    call ESMF_AttributeSet (state3, dataname, .false., rc=rc)

21.3.4 Mark an item NEEDED

How to set the NEEDED state of an item.

    dataname = "Downward wind:needed"
    call ESMF_AttributeSet (state3, name=dataname, value=.true., rc=rc)

21.3.5 Create a NEEDED item

Query an item for the NEEDED status, and creating an item on demand. Similar flags exist for "Ready", "Valid", and "Required for Restart", to mark each data item as ready, having been validated, or needed if the application is to be checkpointed and restarted. The flags are supported to help coordinate the data exchange between components.

    dataname = "Downward wind:needed"
    call ESMF_AttributeGet (state3, dataname, valueList=neededFlag, rc=rc)

    if (rc == ESMF_SUCCESS .and. neededFlag(1)) then
        bundlename = dataname
        bundle2 = ESMF_FieldBundleCreate(name=bundlename, rc=rc)

        call ESMF_StateAdd(state3, (/bundle2/), rc=rc)

    else
        print *, "Data not marked as needed", trim(dataname)
    endif

21.3.6 ESMF_StateReconcile() usage

The set services routines are used to tell ESMF which routine hold the user code for the initialize, run, and finalize blocks of user level Components. These are the separate subroutines called by the code below.

! Initialize routine which creates "field1" on PETs 0 and 1
subroutine comp1_init(gcomp, istate, ostate, clock, rc)
    type(ESMF_GridComp)  :: gcomp
    type(ESMF_State)     :: istate, ostate
    type(ESMF_Clock)     :: clock
    integer, intent(out) :: rc

    type(ESMF_Field) :: field1
    integer :: localrc

    print *, "i am comp1_init"

    field1 = ESMF_FieldEmptyCreate(name="Comp1 Field", rc=localrc)
  
    call ESMF_StateAdd(istate, (/field1/), rc=localrc)
    
    rc = localrc

end subroutine comp1_init

! Initialize routine which creates "field2" on PETs 2 and 3
subroutine comp2_init(gcomp, istate, ostate, clock, rc)
    type(ESMF_GridComp)  :: gcomp
    type(ESMF_State)     :: istate, ostate
    type(ESMF_Clock)     :: clock
    integer, intent(out) :: rc

    type(ESMF_Field) :: field2
    integer :: localrc

    print *, "i am comp2_init"

    field2 = ESMF_FieldEmptyCreate(name="Comp2 Field", rc=localrc)
    
    call ESMF_StateAdd(istate, (/field2/), rc=localrc)

    rc = localrc

end subroutine comp2_init

subroutine comp_dummy(gcomp, rc)
   type(ESMF_GridComp)  :: gcomp
   integer, intent(out) :: rc

   rc = ESMF_SUCCESS
end subroutine comp_dummy

! !PROGRAM: ESMF_StateReconcileEx - State reconciliation
!
! !DESCRIPTION:
!
! This program shows examples of using the State Reconcile function
!-----------------------------------------------------------------------------
#include "ESMF.h"

    ! ESMF Framework module
    use ESMF
    use ESMF_TestMod
    use ESMF_StateReconcileEx_Mod
    implicit none

    ! Local variables
    integer :: rc, petCount
    type(ESMF_State) :: state1
    type(ESMF_GridComp) :: comp1, comp2
    type(ESMF_VM) :: vm
    character(len=ESMF_MAXSTR) :: comp1name, comp2name, statename

A Component can be created which will run only on a subset of the current PET list.

    ! Get the global VM for this job.
    call ESMF_VMGetGlobal(vm=vm, rc=rc)

    comp1name = "Atmosphere"
    comp1 = ESMF_GridCompCreate(name=comp1name, petList=(/ 0, 1 /), rc=rc)
    print *, "GridComp Create returned, name = ", trim(comp1name)

    comp2name = "Ocean"
    comp2 = ESMF_GridCompCreate(name=comp2name, petList=(/ 2, 3 /), rc=rc)
    print *, "GridComp Create returned, name = ", trim(comp2name)

    statename = "Ocn2Atm"
    state1 = ESMF_StateCreate(name=statename, rc=rc)

Here we register the subroutines which should be called for initialization. Then we call ESMF_GridCompInitialize() on all PETs, but the code runs only on the PETs given in the petList when the Component was created.

Because this example is so short, we call the entry point code directly instead of the normal procedure of nesting it in a separate SetServices() subroutine.

    ! This is where the VM for each component is initialized.
    ! Normally you would call SetEntryPoint inside set services,
    ! but to make this example very short, they are called inline below.
    ! This is o.k. because the SetServices routine must execute from within
    ! the parent component VM.
    call ESMF_GridCompSetVM(comp1, comp_dummy, rc=rc)

    call ESMF_GridCompSetVM(comp2, comp_dummy, rc=rc)

    call ESMF_GridCompSetServices(comp1, userRoutine=comp_dummy, rc=rc)

    call ESMF_GridCompSetServices(comp2, userRoutine=comp_dummy, rc=rc)

    print *, "ready to set entry point 1"
    call ESMF_GridCompSetEntryPoint(comp1, ESMF_METHOD_INITIALIZE, &
         comp1_init, rc=rc)

    print *, "ready to set entry point 2"
    call ESMF_GridCompSetEntryPoint(comp2, ESMF_METHOD_INITIALIZE, &
         comp2_init, rc=rc)

    print *, "ready to call init for comp 1"
    call ESMF_GridCompInitialize(comp1, exportState=state1, rc=rc)

    print *, "ready to call init for comp 2"
    call ESMF_GridCompInitialize(comp2, exportState=state1, rc=rc)

Now we have state1 containing field1 on PETs 0 and 1, and state1 containing field2 on PETs 2 and 3. For the code to have a rational view of the data, we call ESMF_StateReconcile which determines which objects are missing from any PET, and communicates information about the object. There is the option of turning metadata reconciliation on or off with the optional parameter shown in the call below. The default behavior is for metadata reconciliation to be off. After the call to reconcile, all ESMF_State objects now have a consistent view of the data.

    print *, "State before calling StateReconcile()"
    call ESMF_StatePrint(state1, rc=rc)

    call ESMF_StateReconcile(state1, vm=vm,  &
                             attreconflag=ESMF_ATTRECONCILE_OFF, rc=rc)

    print *, "State after calling StateReconcile()"
    call ESMF_StatePrint(state1, rc=rc)

end program ESMF_StateReconcileEx


21.3.7 Read Arrays from a NetCDF file and add to a State

This program shows an example of reading and writing Arrays from a State from/to a NetCDF file.

    ! ESMF Framework module
    use ESMF
    use ESMF_TestMod
    implicit none

    ! Local variables
    type(ESMF_State) :: state
    type(ESMF_Array) :: latArray, lonArray, timeArray, humidArray, &
                        tempArray, pArray, rhArray
    type(ESMF_VM) :: vm
    integer :: localPet, rc

The following line of code will read all Array data contained in a NetCDF file, place them in ESMF_Arrays and add them to an ESMF_State. Only PET 0 reads the file; the States in the other PETs remain empty. Currently, the data is not decomposed or distributed; each PET has only 1 DE and only PET 0 contains data after reading the file. Future versions of ESMF will support data decomposition and distribution upon reading a file.

Note that the third party NetCDF library must be installed. For more details, see the "ESMF Users Guide", "Building and Installing the ESMF, Third Party Libraries, NetCDF" and the website http://www.unidata.ucar.edu/software/netcdf.

    ! Read the NetCDF data file into Array objects in the State on PET 0
    call ESMF_StateRead(state, "io_netcdf_testdata.nc", rc=rc)

    ! If the NetCDF library is not present (on PET 0), cleanup and exit 
    if (rc == ESMF_RC_LIB_NOT_PRESENT) then
      call ESMF_StateDestroy(state, rc=rc)
      goto 10
    endif

Only reading data into ESMF_Arrays is supported at this time; ESMF_ArrayBundles, ESMF_Fields, and ESMF_FieldBundles will be supported in future releases of ESMF.

21.3.8 Print Array data from a State

To see that the State now contains the same data as in the file, the following shows how to print out what Arrays are contained within the State and to print the data contained within each Array. The NetCDF utility "ncdump" can be used to view the contents of the NetCDF file. In this example, only PET 0 will contain data.

    if (localPet == 0) then
      ! Print the names and attributes of Array objects contained in the State
      call ESMF_StatePrint(state, rc=rc)

      ! Get each Array by name from the State
      call ESMF_StateGet(state, "lat",  latArray,   rc=rc)
      call ESMF_StateGet(state, "lon",  lonArray,   rc=rc)
      call ESMF_StateGet(state, "time", timeArray,  rc=rc)
      call ESMF_StateGet(state, "Q",    humidArray, rc=rc)
      call ESMF_StateGet(state, "TEMP", tempArray,  rc=rc)
      call ESMF_StateGet(state, "p",    pArray,     rc=rc)
      call ESMF_StateGet(state, "rh",   rhArray,    rc=rc)

      ! Print out the Array data
      call ESMF_ArrayPrint(latArray,   rc=rc)
      call ESMF_ArrayPrint(lonArray,   rc=rc)
      call ESMF_ArrayPrint(timeArray,  rc=rc)
      call ESMF_ArrayPrint(humidArray, rc=rc)
      call ESMF_ArrayPrint(tempArray,  rc=rc)
      call ESMF_ArrayPrint(pArray,     rc=rc)
      call ESMF_ArrayPrint(rhArray,    rc=rc)
    endif

Note that the Arrays "lat", "lon", and "time" hold spatial and temporal coordinate data for the dimensions latitude, longitude and time, respectively. These will be used in future releases of ESMF to create ESMF_Grids.

21.3.9 Write Array data within a State to a NetCDF file

All the Array data within the State on PET 0 can be written out to a NetCDF file as follows:

    ! Write Arrays within the State on PET 0 to a NetCDF file
    call ESMF_StateWrite(state, "io_netcdf_testdata_out.nc", rc=rc)

Currently writing is limited to PET 0; future versions of ESMF will allow parallel writing, as well as parallel reading.

21.4 Restrictions and Future Work

  1. No synchronization of object IDs at object create time. Object IDs are used during the reconcile process to identify objects which are unknown to some subset of the PETs in the currently running VM. Object IDs are assigned in sequential order at object create time.

    One important request by the user community during the ESMF object design was that there be no communication overhead or synchronization when creating distributed ESMF objects. As a consequence it is required to create these objects in unison across all PETs in order to keep the ESMF object identification in sync.

21.5 Design and Implementation Notes

  1. States contain the name of the associated Component, a flag for Import or Export, and a list of data objects, which can be a combination of FieldBundles, Fields, and/or Arrays. The objects must be named and have the proper attributes so they can be identified by the receiver of the data. For example, units and other detailed information may need to be associated with the data as an Attribute.

  2. Data contained in States must be created in unison on each PET of the current VM. This allows the creation process to avoid doing communications since each PET can compute any information it needs to know about any remote PET (for example, the grid distribute method can compute the decomposition of the grid on not only the local PET but also the remote PETs since it knows each PET is making the identical call). For all PETs to have a consistent view of the data this means objects must be given unique names when created, or all objects must be created in the same order on all PETs so ESMF can generate consistent default names for the objects.

    When running components on subsets of the original VM all the PETs can create consistent objects but then when they are put into a State and passed to a component with a different VM and a different set of PETs, a communication call (reconcile) must be made to communicate the missing information to the PETs which were not involved in the original object creation. The reconcile call broadcasts object lists; those PETs which are missing any objects in the total list can receive enough information to reconstruct a proxy object which contains all necessary information about that object, with no local data, on that PET. These proxy objects can be queried by ESMF routines to determine the amount of data and what PETs contain data which is destined to be moved to the local PET (for receiving data) and conversely, can determine which other PETs are going to receive data and how much (for sending data).

    For example, the FieldExcl system test creates 2 Gridded Components on separate subsets of PETs. They use the option of mapping particular, non-monotonic PETs to DEs. The following figures illustrate how the DEs are mapped in each of the Gridded Components in that test:

    Figure 7: The mapping of PETs (processors) to DEs (data) in the source grid created by user_model1.F90 in the FieldExcl system test.
    \scalebox{0.9}{\includegraphics{Excl_src_grid}}

    Figure 8: The mapping of PETs (processors) to DEs (data) in the destination grid created by user_model2.F90 in the FieldExcl system test.
    \scalebox{0.9}{\includegraphics{Excl_dst_grid}}

    In the coupler code, all PETs must make the reconcile call before accessing data in the State. On PETs which already contain data, the objects are unchanged. On PETs which were not involved during the creation of the FieldBundles or Fields, the reconcile call adds an object to the State which contains all the same metadata associated with the object, but creates a slightly different Grid object, called a Proxy Grid. These PETs contain no local data, so the Array object is empty, and the DELayout for the Grid is like this:

    Figure 9: The mapping of PETs (processors) to DEs (data) in the source grid after the reconcile call in user_coupler.F90 in the FieldExcl system test.
    \scalebox{0.9}{\includegraphics{Excl_src_grid_cpl}}

    Figure 10: The mapping of PETs (processors) to DEs (data) in the destination grid after the reconcile call in user_coupler.F90 in the FieldExcl system test.
    \scalebox{0.9}{\includegraphics{Excl_dst_grid_cpl}}

21.6 Object Model

The following is a simplified UML diagram showing the structure of the State class. States can contain FieldBundles, Fields, Arrays, or nested States. See Appendix A, A Brief Introduction to UML, for a translation table that lists the symbols in the diagram and their meaning.

\includegraphics{State_obj}

21.7 Class API

21.7.1 ESMF_StateAssignment(=) - State assignment


INTERFACE:

   interface assignment(=)
   state1 = state2
ARGUMENTS:
   type(ESMF_State) :: state1
   type(ESMF_State) :: state2
STATUS:

DESCRIPTION:

Assign state1 as an alias to the same ESMF State object in memory as state2. If state2 is invalid, then state1 will be equally invalid after the assignment.

The arguments are:

state1
The ESMF_State object on the left hand side of the assignment.
state2
The ESMF_State object on the right hand side of the assignment.

21.7.2 ESMF_StateOperator(==) - State equality operator


INTERFACE:

   interface operator(==)
   if (state1 == state2) then ... endif
   OR
   result = (state1 == state2)
RETURN VALUE:
   logical :: result
ARGUMENTS:
   type(ESMF_State), intent(in) :: state1
   type(ESMF_State), intent(in) :: state2
STATUS:

DESCRIPTION:

Test whether state1 and state2 are valid aliases to the same ESMF State object in memory. For a more general comparison of two ESMF States, going beyond the simple alias test, the ESMF_StateMatch() function (not yet implemented) must be used.

The arguments are:

state1
The ESMF_State object on the left hand side of the equality operation.
state2
The ESMF_State object on the right hand side of the equality operation.

21.7.3 ESMF_StateOperator(/=) - State not equal operator


INTERFACE:

   interface operator(/=)
   if (state1 /= state2) then ... endif
   OR
   result = (state1 /= state2)
RETURN VALUE:
   logical :: result
ARGUMENTS:
   type(ESMF_State), intent(in) :: state1
   type(ESMF_State), intent(in) :: state2
STATUS:

DESCRIPTION:

Test whether state1 and state2 are not valid aliases to the same ESMF State object in memory. For a more general comparison of two ESMF States, going beyond the simple alias test, the ESMF_StateMatch() function (not yet implemented) must be used.

The arguments are:

state1
The ESMF_State object on the left hand side of the non-equality operation.
state2
The ESMF_State object on the right hand side of the non-equality operation.

21.7.4 ESMF_StateAdd - Add a list of items to a State


INTERFACE:

   subroutine ESMF_StateAdd(state, <itemList>, relaxedFlag, rc)
ARGUMENTS:
   type(ESMF_State), intent(inout) :: state
   <itemList>, see below for supported values
 -- The following arguments require argument keyword syntax (e.g. rc=rc). --
   logical, intent(in), optional :: relaxedFlag
   integer, intent(out), optional :: rc
STATUS:

DESCRIPTION:

Add a list of items to a ESMF_State. It is an error if any item in <itemlist> already matches, by name, an item already contained in state.

Supported values for <itemList> are:

type(ESMF_Array), intent(in) :: arrayList(:)
type(ESMF_ArrayBundle), intent(in) :: arraybundleList(:)
type(ESMF_Field), intent(in) :: fieldList(:)
type(ESMF_FieldBundle), intent(in) :: fieldbundleList(:)
type(ESMF_RouteHandle), intent(in) :: routehandleList(:)
type(ESMF_State), intent(in) :: nestedStateList(:)

The arguments are:

state
An ESMF_State to which the <itemList> will be added.
<itemList>
The list of items to be added. This is a reference only; when the ESMF_State is destroyed the <itemList> items contained within it will not be destroyed. Also, the items in the <itemList> cannot be safely destroyed before the ESMF_State is destroyed. Since <itemList> items can be added to multiple containers, it remains the responsibility of the user to manage their destruction when they are no longer in use.
[relaxedflag]
A setting of .true. indicates a relaxed definition of "add", where it is not an error if <itemList> contains items with names that are found in state. The State is left unchanged for these items. For .false. this is treated as an error condition. The default setting is .false..
[rc]
Return code; equals ESMF_SUCCESS if there are no errors.

21.7.5 ESMF_StateAddReplace - Add or replace a list of items to a State


INTERFACE:

   subroutine ESMF_StateAddReplace(state, <itemList>, rc)
ARGUMENTS:
   type(ESMF_State), intent(inout) :: state
   <itemList>, see below for supported values
 -- The following arguments require argument keyword syntax (e.g. rc=rc). --
   integer, intent(out), optional :: rc
STATUS:

DESCRIPTION:

Add or replace a list of items to an ESMF_State. If an item in <itemList> does not match any items already present in state, it is added. Items with names already present in the state replace the existing item.

Supported values for <itemList> are:

type(ESMF_Array), intent(in) :: arrayList(:)
type(ESMF_ArrayBundle), intent(in) :: arraybundleList(:)
type(ESMF_Field), intent(in) :: fieldList(:)
type(ESMF_FieldBundle), intent(in) :: fieldbundleList(:)
type(ESMF_RouteHandle), intent(in) :: routehandleList(:)
type(ESMF_State), intent(in) :: nestedStateList(:)

The arguments are:

state
An ESMF_State to which the <itemList> will be added or replaced.
<itemList>
The list of items to be added or replaced. This is a reference only; when the ESMF_State is destroyed the <itemList> items contained within it will not be destroyed. Also, the items in the <itemList> cannot be safely destroyed before the ESMF_State is destroyed. Since <itemList> items can be added to multiple containers, it remains the responsibility of the user to manage their destruction when they are no longer in use.
[rc]
Return code; equals ESMF_SUCCESS if there are no errors.

21.7.6 ESMF_StateCreate - Create a new State


INTERFACE:

       function ESMF_StateCreate(stateintent, &
                    arrayList, arraybundleList, &
                    fieldList, fieldbundleList, &
                    nestedStateList, &
                    routehandleList, name, rc)
RETURN VALUE:
       type(ESMF_State) :: ESMF_StateCreate
ARGUMENTS:
 -- The following arguments require argument keyword syntax (e.g. rc=rc). --
       type(ESMF_StateIntent_Flag), intent(in), optional :: stateintent
       type(ESMF_Array), intent(in), optional :: arrayList(:)
       type(ESMF_ArrayBundle), intent(in), optional :: arraybundleList(:)
       type(ESMF_Field), intent(in), optional :: fieldList(:)
       type(ESMF_FieldBundle), intent(in), optional :: fieldbundleList(:)
       type(ESMF_State), intent(in), optional :: nestedStateList(:)
       type(ESMF_RouteHandle), intent(in), optional :: routehandleList(:)
       character(len=*), intent(in), optional :: name
       integer, intent(out), optional :: rc
STATUS:

DESCRIPTION:

Create a new ESMF_State, set default characteristics for objects added to it, and optionally add initial objects to it.

The arguments are:

[stateintent]
Import or Export ESMF_State. Valid values are ESMF_STATEINTENT_IMPORT, ESMF_STATEINTENT_EXPORT, or ESMF_STATEINTENT_UNSPECIFIED The default is ESMF_STATEINTENT_UNSPECIFIED.
[arrayList]
A list (Fortran array) of ESMF_Arrays.
[arraybundleList]
A list (Fortran array) of ESMF_ArrayBundles.
[fieldList]
A list (Fortran array) of ESMF_Fields.
[fieldbundleList]
A list (Fortran array) of ESMF_FieldBundles.
[nestedStateList]
A list (Fortran array) of ESMF_States to be nested inside the outer ESMF_State.
[routehandleList]
A list (Fortran array) of ESMF_RouteHandles.
[name]
Name of this ESMF_State object. A default name will be generated if none is specified.
[rc]
Return code; equals ESMF_SUCCESS if there are no errors.

21.7.7 ESMF_StateDestroy - Release resources for a State


INTERFACE:

       recursive subroutine ESMF_StateDestroy(state, rc)
ARGUMENTS:
       type(ESMF_State), intent(inout) :: state
 -- The following arguments require argument keyword syntax (e.g. rc=rc). --
       integer, intent(out), optional :: rc
STATUS:

DESCRIPTION:

Releases resources associated with this ESMF_State. Actual objects added to ESMF_States will not be destroyed, it remains the responsibility of the user to destroy these objects in the correct context.

The arguments are:

state
Destroy contents of this ESMF_State.
[rc]
Return code; equals ESMF_SUCCESS if there are no errors.

21.7.8 ESMF_StateGet - Get object-wide information from a State


INTERFACE:

       ! Private name; call using ESMF_StateGet()
       subroutine ESMF_StateGetInfo(state, &
             itemSearch, itemorderflag, nestedFlag, &
             stateintent, itemCount, itemNameList, itemTypeList, name, rc)
ARGUMENTS:
       type(ESMF_State), intent(in) :: state
 -- The following arguments require argument keyword syntax (e.g. rc=rc). --
       character (len=*), intent(in), optional :: itemSearch
       type(ESMF_ItemOrder_Flag), intent(in), optional :: itemorderflag
       logical, intent(in), optional :: nestedFlag
       type(ESMF_StateIntent_Flag), intent(out), optional :: stateintent
       integer, intent(out), optional :: itemCount
       character (len=*), intent(out), optional :: itemNameList(:)
       type(ESMF_StateItem_Flag), intent(out), optional :: itemTypeList(:)
       character (len=*), intent(out), optional :: name
       integer, intent(out), optional :: rc
STATUS:

DESCRIPTION:

Returns the requested information about this ESMF_State. The optional itemSearch argument may specify the name of an individual item to search for. When used in conjunction with the nestedFlag, nested States will also be searched.

Typically, an ESMF_StateGet() information request will be performed twice. The first time, the itemCount argument will be used to query the size of arrays that are needed. Arrays can then be allocated to the correct size for itemNameList and itemtypeList as needed. A second call to ESMF_StateGet() will then fill in the values.

The arguments are:

state
An ESMF_State object to be queried.
[itemSearch]
Query objects by name in the State. When the nestedFlag option is set to .true., all nested States will also be searched for the specified name.
[itemorderflag]
Specifies the order of the returned items in the itemNameList and itemTypeList. The default is ESMF_ITEMORDER_ABC. See 52.31 for a full list of options.
[nestedFlag]
When set to .false., returns information at the current State level only (default) When set to .true., additionally returns information from nested States
[stateintent]
Returns the type, e.g., Import or Export, of this ESMF_State. Possible values are listed in Section 21.2.1.
[itemCount]
Count of items in this ESMF_State. When the nestedFlag option is set to .true., the count will include items present in nested States. When using itemSearch, it will count the number of items matching the specified name.
[itemNameList]
Array of item names in this ESMF_State. When the nestedFlag option is set to .true., the list will include items present in nested States. When using itemSearch, it will return the names of items matching the specified name. itemNameList must be at least itemCount long.
[itemTypeList]
Array of possible item object types in this ESMF_State. When the nestedFlag option is set to .true., the list will include items present in nested States. When using itemSearch, it will return the types of items matching the specified name. Must be at least itemCount long. Return values are listed in Section 21.2.2.
[name]
Returns the name of this ESMF_State.
[rc]
Return code; equals ESMF_SUCCESS if there are no errors.

21.7.9 ESMF_StateGet - Get information about an item in a State by item name


INTERFACE:

       ! Private name; call using ESMF_StateGet()
       subroutine ESMF_StateGetItemInfo(state, itemName, itemType, rc)
ARGUMENTS:
       type(ESMF_State), intent(in) :: state
       character (len=*), intent(in) :: itemName
       type(ESMF_StateItem_Flag), intent(out) :: itemType
 -- The following arguments require argument keyword syntax (e.g. rc=rc). --
       integer, intent(out), optional :: rc
STATUS:

DESCRIPTION:

Returns the type for the item named name in this ESMF_State. If no item with this name exists, the value ESMF_STATEITEM_NOTFOUND will be returned and the error code will not be set to an error. Thus this routine can be used to safely query for the existence of items by name whether or not they are expected to be there. The error code will be set in case of other errors, for example if the ESMF_State itself is invalid.

The arguments are:

state
ESMF_State to be queried.
itemName
Name of the item to return information about.
itemType
Returned item types for the item with the given name, including placeholder names. Options are listed in Section 21.2.2. If no item with the given name is found, ESMF_STATEITEM_NOTFOUND will be returned and rc will not be set to an error.
[rc]
Return code; equals ESMF_SUCCESS if there are no errors.

21.7.10 ESMF_StateGet - Get an item from a State by item name


INTERFACE:

   subroutine ESMF_StateGet(state, itemName, <item>, rc)
ARGUMENTS:
   type(ESMF_State), intent(in) :: state
   character (len=*), intent(in) :: itemName
   <item>, see below for supported values
 -- The following arguments require argument keyword syntax (e.g. rc=rc). --
   integer, intent(out), optional :: rc
STATUS:

DESCRIPTION:

Returns an <item> from an ESMF_State by item name. If the ESMF_State contains the <item> directly, only itemName is required.

If the state contains nested ESMF_States, the itemName argument may specify a fully qualified name to access the desired item with a single call. This is performed using the '/' character to separate the names of the intermediate State names leading to the desired item. (E.g., itemName='state1/state12/item').

Supported values for <item> are:

type(ESMF_Array), intent(out) :: array
type(ESMF_ArrayBundle), intent(out) :: arraybundle
type(ESMF_Field), intent(out) :: field
type(ESMF_FieldBundle), intent(out) :: fieldbundle
type(ESMF_RouteHandle), intent(out) :: routehandle
type(ESMF_State), intent(out) :: nestedState

The arguments are:

state
State to query for an <item> named itemName.
itemName
Name of <item> to be returned. This name may be fully qualified in order to access nested State items.
<item>
Returned reference to the <item>.
[rc]
Return code; equals ESMF_SUCCESS if there are no errors.

21.7.11 ESMF_StateIsCreated - Check whether an State object has been created


INTERFACE:

   function ESMF_StateIsCreated(state, rc)
RETURN VALUE:
     logical :: ESMF_StateIsCreated
ARGUMENTS:
     type(ESMF_State), intent(in) :: state
 -- The following arguments require argument keyword syntax (e.g. rc=rc). --
     integer, intent(out), optional :: rc
DESCRIPTION:

Return .true. if the state has been created. Otherwise return .false.. If an error occurs, i.e. rc /= ESMF_SUCCESS is returned, the return value of the function will also be .false..

The arguments are:

state
ESMF_State queried.
[rc]
Return code; equals ESMF_SUCCESS if there are no errors.

21.7.12 ESMF_StatePrint - Print State information


INTERFACE:

       subroutine ESMF_StatePrint(state, options, nestedFlag, rc)
ARGUMENTS:
       type(ESMF_State), intent(in) :: state
       character(len=*), intent(in), optional :: options
       logical, intent(in), optional :: nestedFlag
       integer, intent(out), optional :: rc
DESCRIPTION:

Prints information about the state to stdout.

The arguments are:

state
The ESMF_State to print.
[options]
Print options: " ", or "brief" - print names and types of the objects within the state (default), "long" - print additional information, such as proxy flags
[nestedFlag]
When set to .false., prints information about the current State level only (default), When set to .true., additionally prints information from nested States
[rc]
Return code; equals ESMF_SUCCESS if there are no errors.

21.7.13 ESMF_StateRead - Read data items from a file into a State


INTERFACE:

       subroutine ESMF_StateRead(state, fileName, rc)
ARGUMENTS:
       type(ESMF_State), intent(inout) :: state
       character (len=*), intent(in) :: fileName
       integer, intent(out), optional :: rc
DESCRIPTION:

Currently limited to read in all Arrays from a NetCDF file and add them to a State object. Future releases will enable more items of a State to be read from a file of various formats.

Only PET 0 reads the file; the States in other PETs remain empty. Currently, the data is not decomposed or distributed; each PET has only 1 DE and only PET 0 contains data after reading the file. Future versions of ESMF will support data decomposition and distribution upon reading a file. See Section 21.3.7 for an example.

Note that the third party NetCDF library must be installed. For more details, see the "ESMF Users Guide", "Building and Installing the ESMF, Third Party Libraries, NetCDF" and the website http://www.unidata.ucar.edu/software/netcdf.

The arguments are:

state
The ESMF_State to add items read from file. Currently only Arrays are supported.
fileName
File to be read.
[rc]
Return code; equals ESMF_SUCCESS if there are no errors. Equals ESMF_RC_LIB_NOT_PRESENT if the NetCDF library is not present.

21.7.14 ESMF_StateReconcile - Reconcile State data across all PETs in a VM


INTERFACE:

   subroutine ESMF_StateReconcile (state, vm, attreconflag, rc)
ARGUMENTS:
     type(ESMF_State),            intent(inout)         :: state
     type(ESMF_VM),               intent(in),  optional :: vm
     type(ESMF_AttReconcileFlag), intent(in),  optional :: attreconflag
     integer,                     intent(out), optional :: rc
DESCRIPTION:

Must be called for any ESMF_State which contains ESMF objects that have not been created on all the PETs of the currently running ESMF_Component. For example, if a coupler is operating on data which was created by another component that ran on only a subset of the couplers PETs, the coupler must make this call first before operating on any data inside that ESMF_State. After calling ESMF_StateReconcile all PETs will have a common view of all objects contained in this ESMF_State. The option to reconcile the metadata associated with the objects contained in this ESMF_State also exists. The default behavior for this capability is to not reconcile metadata unless told otherwise.

This call is collective across the specified VM.

The arguments are:

state
ESMF_State to reconcile.
[vm]
ESMF_VM for this ESMF_Component. By default, it is set to the current vm.
[attreconflag]
Flag to tell if Attribute reconciliation is to be done as well as data reconciliation. This flag is documented in section 52.6. Default is ESMF_ATTRECONCILE_OFF.
[rc]
Return code; equals ESMF_SUCCESS if there are no errors.

21.7.15 ESMF_StateRemove - Remove an item from a State - (DEPRECATED METHOD)


INTERFACE:

   ! Private name; call using ESMF_StateRemove ()
   subroutine ESMF_StateRemoveOneItem (state, itemName, &
       relaxedFlag, rc)
ARGUMENTS:
     type(ESMF_State), intent(inout) :: state
     character(*), intent(in) :: itemName
 -- The following arguments require argument keyword syntax (e.g. rc=rc). --
     logical, intent(in), optional :: relaxedFlag
     integer, intent(out), optional :: rc
STATUS:

DESCRIPTION:

Remove an existing reference to an item from a State.

The arguments are:

state
The ESMF_State within which itemName will be removed.
itemName
The name of the item to be removed. This is a reference only. The item itself is unchanged.

If the state contains nested ESMF_States, the itemName argument may specify a fully qualified name to remove the desired item with a single call. This is performed using the "/" character to separate the names of the intermediate State names leading to the desired item. (E.g., itemName="state1/state12/item".

Since an item could potentially be referenced by multiple containers, it remains the responsibility of the user to manage its destruction when it is no longer in use.

[relaxedflag]
A setting of .true. indicates a relaxed definition of "remove", where it is not an error if itemName is not present in the state. For .false. this is treated as an error condition. The default setting is .false..
[rc]
Return code; equals ESMF_SUCCESS if there are no errors.

21.7.16 ESMF_StateRemove - Remove a list of items from a State


INTERFACE:

   ! Private name; call using ESMF_StateRemove ()
   subroutine ESMF_StateRemoveList (state, itemNameList, relaxedFlag, rc)
ARGUMENTS:
     type(ESMF_State), intent(inout) :: state
     character(*), intent(in) :: itemNameList(:)
 -- The following arguments require argument keyword syntax (e.g. rc=rc). --
     logical, intent(in), optional :: relaxedFlag
     integer, intent(out), optional :: rc
STATUS:

DESCRIPTION:

Remove existing references to items from a State.

The arguments are:

state
The ESMF_State within which itemName will be removed.
itemNameList
The name of the items to be removed. This is a reference only. The items themselves are unchanged.

If the state contains nested ESMF_States, the itemName arguments may specify fully qualified names to remove the desired items with a single call. This is performed using the "/" character to separate the names of the intermediate State names leading to the desired items. (E.g., itemName="state1/state12/item".

Since items could potentially be referenced by multiple containers, it remains the responsibility of the user to manage their destruction when they are no longer in use.

[relaxedflag]
A setting of .true. indicates a relaxed definition of "remove", where it is not an error if an item in the itemNameList is not present in the state. For .false. this is treated as an error condition. The default setting is .false..
[rc]
Return code; equals ESMF_SUCCESS if there are no errors.

21.7.17 ESMF_StateReplace - Replace a list of items within a State


INTERFACE:

   subroutine ESMF_StateReplace(state, <itemList>, relaxedflag, rc)
ARGUMENTS:
   type(ESMF_State), intent(inout) :: state
   <itemList>, see below for supported values
 -- The following arguments require argument keyword syntax (e.g. rc=rc). --
   logical, intent(in), optional :: relaxedflag
   integer, intent(out), optional :: rc
STATUS:

DESCRIPTION:

Replace a list of items with a ESMF_State. If an item in <itemList> does not match any items already present in state, an error is returned.

Supported values for <itemList> are:

type(ESMF_Array), intent(in) :: arrayList(:)
type(ESMF_ArrayBundle), intent(in) :: arraybundleList(:)
type(ESMF_Field), intent(in) :: fieldList(:)
type(ESMF_FieldBundle), intent(in) :: fieldbundleList(:)
type(ESMF_RouteHandle), intent(in) :: routehandleList(:)
type(ESMF_State), intent(in) :: nestedStateList(:)

The arguments are:

state
An ESMF_State within which the <itemList> items will be replaced.
<itemList>
The list of items to be replaced. This is a reference only; when the ESMF_State is destroyed the <itemList> contained in it will not be destroyed. Also, the items in the <itemList> cannot be safely destroyed before the ESMF_State is destroyed. Since <itemList> items can be added to multiple containers, it remains the responsibility of the user to manage their destruction when they are no longer in use.
[relaxedflag]
A setting of .true. indicates a relaxed definition of "replace", where it is not an error if <itemList> contains items with names that are not found in state. The State is left unchanged for these items. For .false. this is treated as an error condition. The default setting is .false..
[rc]
Return code; equals ESMF_SUCCESS if there are no errors.

21.7.18 ESMF_StateValidate - Check validity of a State


INTERFACE:

       subroutine ESMF_StateValidate(state, nestedFlag, rc)
ARGUMENTS:
       type(ESMF_State), intent(in) :: state
 -- The following arguments require argument keyword syntax (e.g. rc=rc). --
       logical,          intent(in),  optional :: nestedFlag
       integer,          intent(out), optional :: rc
STATUS:

DESCRIPTION:

Validates that the state is internally consistent. Currently this method determines if the State is uninitialized or already destroyed. The method returns an error code if problems are found.

The arguments are:

state
The ESMF_State to validate.
[nestedFlag]
.false. - validates at the current State level only (default) .true. - recursively validates any nested States
[rc]
Return code; equals ESMF_SUCCESS if there are no errors.

21.7.19 ESMF_StateWrite - Write items from a State to file


INTERFACE:

       subroutine ESMF_StateWrite(state, fileName, rc)
ARGUMENTS:
       type(ESMF_State),  intent(in)            :: state 
       character (len=*), intent(in)            :: fileName
       integer,           intent(out), optional :: rc
DESCRIPTION:

Currently limited to write out all Arrays of a State object to a netCDF file. Future releases will enable more item types of a State to be written to files of various formats.

Writing is currently limited to PET 0; future versions of ESMF will allow parallel writing, as well as parallel reading.

See Section 21.3.7 for an example.

Note that the third party NetCDF library must be installed. For more details, see the "ESMF Users Guide", "Building and Installing the ESMF, Third Party Libraries, NetCDF" and the website http://www.unidata.ucar.edu/software/netcdf.

The arguments are:

state
The ESMF_State from which to write items. Currently limited to Arrays.
fileName
File to be written.
[rc]
Return code; equals ESMF_SUCCESS if there are no errors. Equals ESMF_RC_LIB_NOT_PRESENT if the NetCDF library is not present.

22 Attachable Methods

22.1 Description

ESMF allows user methods to be attached to Components and States. Providing this capability supports a more object oriented way of model design.

Attachable methods on Components can be used to implement the concept of generic Components where the specialization requires attaching methods with well defined names. This methods are then called by the generic Component code.

Attaching methods to States can be used to supply data operations along with the data objects inside of a State object. This can be useful where a producer Component not only supplies a data set, but also the associated processing functionality. This can be more efficient than providing all of the possible sets of derived data.

22.2 Use and Examples

The following examples demonstrate how a producer Component attaches a user defined method to a State, and how it implements the method. The attached method is then executed by the consumer Component.

22.2.1 Producer Component attaches user defined method

The producer Component attaches a user defined method to exportState during the Component's initialize method. The user defined method is attached with label finalCalculation by which it will become accessible to the consumer Component.

  subroutine init(gcomp, importState, exportState, clock, rc)
    ! arguments
    type(ESMF_GridComp):: gcomp
    type(ESMF_State):: importState, exportState
    type(ESMF_Clock):: clock
    integer, intent(out):: rc
    
    call ESMF_MethodAdd(exportState, label="finalCalculation", &
      userRoutine=finalCalc, rc=rc)

    rc = 0
  end subroutine !--------------------------------------------------------------

22.2.2 Producer Component implements user defined method

The producer Component implements the attached, user defined method finalCalc. Strict interface rules apply for the user defined method.

  subroutine finalCalc(state, rc)
    ! arguments
    type(ESMF_State):: state
    integer, intent(out):: rc

    ! access data objects in state and perform calculation
    
    print *, "dummy output from attached method "

    rc = 0
  end subroutine !--------------------------------------------------------------

22.2.3 Consumer Component executes user defined method

The consumer Component executes the user defined method on the importState.

  subroutine init(gcomp, importState, exportState, clock, rc)
    ! arguments
    type(ESMF_GridComp):: gcomp
    type(ESMF_State):: importState, exportState
    type(ESMF_Clock):: clock
    integer, intent(out):: rc
    
    integer:: userRc
    
    call ESMF_MethodExecute(importState, label="finalCalculation", &
      userRc=userRc, rc=rc)

    rc = 0
  end subroutine !--------------------------------------------------------------

22.3 Restrictions and Future Work

  1. Not reconciled. Attachable Methods are PET-local settings on an object. Currently Attachable Methods cannot be reconciled (i.e. ignored during ESMF_StateReconcile()).
  2. No copy nor move. Currently Attachable Methods cannot be copied or moved between objects.

22.4 Class API

22.4.1 ESMF_MethodAdd - Attach user method to State


INTERFACE:

   ! Private name; call using ESMF_MethodAdd()
   subroutine ESMF_MethodStateAdd(state, label, index, userRoutine, rc)
ARGUMENTS:
     type(ESMF_State)                        :: state
     character(len=*), intent(in)            :: label
     integer,          intent(in),  optional :: index
     interface
       subroutine userRoutine(state, rc)
         use ESMF_StateMod
         implicit none
         type(ESMF_State)            :: state        ! must not be optional
         integer, intent(out)        :: rc           ! must not be optional
       end subroutine
     end interface
     integer,          intent(out), optional :: rc
DESCRIPTION:

Attach userRoutine.

The arguments are:

state
The ESMF_State to attach to.
label
Label of method.
[index]
Integer modifier to distinguish multiple entries with the same label.
userRoutine
The user-supplied subroutine to be associated with the label.

The subroutine must have the exact interface shown above for the userRoutine argument. Arguments in userRoutine must not be declared as optional, and the types, intent and order must match. Prior to Fortran-2008, the subroutine must be either a module scope procedure, or an external procedure that has a matching interface block specified for it. An internal procedure which is contained within another procedure must not be used. From Fortran-2008 onwards, an internal procedure contained within either a main program or a module procedure may be used. If the internal procedure is contained within a module procedure, it is subject to initialization requirements. See: 16.4.8

[rc]
Return code; equals ESMF_SUCCESS if there are no errors.

22.4.2 ESMF_MethodAdd - Attach user method, located in shared object, to State


INTERFACE:

   ! Private name; call using ESMF_MethodAdd()
   subroutine ESMF_MethodStateAddShObj(state, label, index, userRoutine, &
     sharedObj, rc)
ARGUMENTS:
     type(ESMF_State)                        :: state
     character(len=*), intent(in)            :: label
     integer,          intent(in),  optional :: index
     character(len=*), intent(in)            :: userRoutine
     character(len=*), intent(in),  optional :: sharedObj
     integer,          intent(out), optional :: rc
DESCRIPTION:

Attach userRoutine.

The arguments are:

state
The ESMF_State to attach to.
label
Label of method.
[index]
Integer modifier to distinguish multiple entries with the same label.
userRoutine
Name of user-supplied subroutine to be associated with the label, specified as a character string.

The subroutine must have the exact interface shown in ESMF_MethodStateAdd for the userRoutine argument. Arguments in userRoutine must not be declared as optional, and the types, intent and order must match. Prior to Fortran-2008, the subroutine must be either a module scope procedure, or an external procedure that has a matching interface block specified for it. An internal procedure which is contained within another procedure must not be used. From Fortran-2008 onwards, an internal procedure contained within either a main program or a module procedure may be used. If the internal procedure is contained within a module procedure, it is subject to initialization requirements. See: 16.4.8

[sharedObj]
Name of shared object that contains userRoutine. If the sharedObj argument is not provided the executable itself will be searched for userRoutine.
[rc]
Return code; equals ESMF_SUCCESS if there are no errors.

22.4.3 ESMF_MethodExecute - Execute user method attached to State


INTERFACE:

   ! Private name; call using ESMF_MethodExecute()
   subroutine ESMF_MethodStateExecute(state, label, index, existflag, &
     userRc, rc)
ARGUMENTS:
     type(ESMF_State)                        :: state
     character(len=*), intent(in)            :: label
     integer,          intent(in),  optional :: index
     logical,          intent(out), optional :: existflag
     integer,          intent(out), optional :: userRc
     integer,          intent(out), optional :: rc
DESCRIPTION:

Execute attached method.

The arguments are:

state
The ESMF_State to attach to.
label
Label of method.
[index]
Integer modifier to distinguish multiple entries with the same label.
[existflag]
Returned .true. indicates that the method specified by label exists and was executed. A return value of .false. indicates that the method does not exist and consequently was not executed. By default, i.e. if existflag was not specified, the latter condition will lead to rc not equal ESMF_SUCCESS being returned. However, if existflag was specified, a method not existing is not an error condition.
[userRc]
Return code set by attached method before returning.
[rc]
Return code; equals ESMF_SUCCESS if there are no errors.

22.4.4 ESMF_MethodRemove - Remove user method attached to State


INTERFACE:

   ! Private name; call using ESMF_MethodRemove()
   subroutine ESMF_MethodStateRemove(state, label, index, rc)
ARGUMENTS:
     type(ESMF_State)                        :: state
     character(len=*), intent(in)            :: label
     integer,          intent(in),  optional :: index
     integer,          intent(out), optional :: rc
DESCRIPTION:

Remove attached method.

The arguments are:

state
The ESMF_State to attach to.
label
Label of method.
[index]
Integer modifier to distinguish multiple entries with the same label.
[rc]
Return code; equals ESMF_SUCCESS if there are no errors.

22.4.5 ESMF_MethodAdd - Attach user method to GridComp


INTERFACE:

   ! Private name; call using ESMF_MethodAdd()
   subroutine ESMF_MethodGridCompAdd(gcomp, label, index, userRoutine, rc)
ARGUMENTS:
     type(ESMF_GridComp)                     :: gcomp
     character(len=*), intent(in)            :: label
     integer,          intent(in),  optional :: index
     interface
       subroutine userRoutine(gcomp, rc)
         use ESMF_CompMod
         implicit none
         type(ESMF_GridComp)         :: gcomp        ! must not be optional
         integer, intent(out)        :: rc           ! must not be optional
       end subroutine
     end interface
     integer,          intent(out), optional :: rc
DESCRIPTION:

Attach userRoutine.

The arguments are:

gcomp
The ESMF_GridComp to attach to.
label
Label of method.
[index]
Integer modifier to distinguish multiple entries with the same label.
userRoutine
The user-supplied subroutine to be associated with the label.

The subroutine must have the exact interface shown above for the userRoutine argument. Arguments in userRoutine must not be declared as optional, and the types, intent and order must match. Prior to Fortran-2008, the subroutine must be either a module scope procedure, or an external procedure that has a matching interface block specified for it. An internal procedure which is contained within another procedure must not be used. From Fortran-2008 onwards, an internal procedure contained within either a main program or a module procedure may be used. If the internal procedure is contained within a module procedure, it is subject to initialization requirements. See: 16.4.8

[rc]
Return code; equals ESMF_SUCCESS if there are no errors.

22.4.6 ESMF_MethodAdd - Attach user method, located in shared object, to GridComp


INTERFACE:

   ! Private name; call using ESMF_MethodAdd()
   subroutine ESMF_MethodGridCompAddShObj(gcomp, label, index, userRoutine, &
     sharedObj, rc)
ARGUMENTS:
     type(ESMF_GridComp)                     :: gcomp
     character(len=*), intent(in)            :: label
     integer,          intent(in),  optional :: index
     character(len=*), intent(in)            :: userRoutine
     character(len=*), intent(in),  optional :: sharedObj
     integer,          intent(out), optional :: rc
DESCRIPTION:

Attach userRoutine.

The arguments are:

gcomp
The ESMF_GridComp to attach to.
label
Label of method.
[index]
Integer modifier to distinguish multiple entries with the same label.
userRoutine
Name of user-supplied subroutine to be associated with the label, specified as a character string.

The subroutine must have the exact interface shown in ESMF_MethodGridCompAdd for the userRoutine argument. Arguments in userRoutine must not be declared as optional, and the types, intent and order must match. Prior to Fortran-2008, the subroutine must be either a module scope procedure, or an external procedure that has a matching interface block specified for it. An internal procedure which is contained within another procedure must not be used. From Fortran-2008 onwards, an internal procedure contained within either a main program or a module procedure may be used. If the internal procedure is contained within a module procedure, it is subject to initialization requirements. See: 16.4.8

[sharedObj]
Name of shared object that contains userRoutine. If the sharedObj argument is not provided the executable itself will be searched for userRoutine.
[rc]
Return code; equals ESMF_SUCCESS if there are no errors.

22.4.7 ESMF_MethodAdd - Attach user method to CplComp


INTERFACE:

   ! Private name; call using ESMF_MethodAdd()
   subroutine ESMF_MethodCplCompAdd(cplcomp, label, index, userRoutine, rc)
ARGUMENTS:
     type(ESMF_CplComp)                      :: cplcomp
     character(len=*), intent(in)            :: label
     integer,          intent(in),  optional :: index
     interface
       subroutine userRoutine(cplcomp, rc)
         use ESMF_CompMod
         implicit none
         type(ESMF_CplComp)          :: cplcomp      ! must not be optional
         integer, intent(out)        :: rc           ! must not be optional
       end subroutine
     end interface
     integer,          intent(out), optional :: rc
DESCRIPTION:

Attach userRoutine.

The arguments are:

cplcomp
The ESMF_CplComp to attach to.
label
Label of method.
[index]
Integer modifier to distinguish multiple entries with the same label.
userRoutine
The user-supplied subroutine to be associated with the label.

The subroutine must have the exact interface shown above for the userRoutine argument. Arguments in userRoutine must not be declared as optional, and the types, intent and order must match. Prior to Fortran-2008, the subroutine must be either a module scope procedure, or an external procedure that has a matching interface block specified for it. An internal procedure which is contained within another procedure must not be used. From Fortran-2008 onwards, an internal procedure contained within either a main program or a module procedure may be used. If the internal procedure is contained within a module procedure, it is subject to initialization requirements. See: 16.4.8

[rc]
Return code; equals ESMF_SUCCESS if there are no errors.

22.4.8 ESMF_MethodAdd - Attach user method, located in shared object, to CplComp


INTERFACE:

   ! Private name; call using ESMF_MethodAdd()
   subroutine ESMF_MethodCplCompAddShObj(cplcomp, label, index, userRoutine, &
     sharedObj, rc)
ARGUMENTS:
     type(ESMF_CplComp)                      :: cplcomp
     character(len=*), intent(in)            :: label
     integer,          intent(in),  optional :: index
     character(len=*), intent(in)            :: userRoutine
     character(len=*), intent(in),  optional :: sharedObj
     integer,          intent(out), optional :: rc
DESCRIPTION:

Attach userRoutine.

The arguments are:

cplcomp
The ESMF_CplComp to attach to.
label
Label of method.
[index]
Integer modifier to distinguish multiple entries with the same label.
userRoutine
Name of user-supplied subroutine to be associated with the label, specified as a character string.

The subroutine must have the exact interface shown in ESMF_MethodCplCompAdd for the userRoutine argument. Arguments in userRoutine must not be declared as optional, and the types, intent and order must match. Prior to Fortran-2008, the subroutine must be either a module scope procedure, or an external procedure that has a matching interface block specified for it. An internal procedure which is contained within another procedure must not be used. From Fortran-2008 onwards, an internal procedure contained within either a main program or a module procedure may be used. If the internal procedure is contained within a module procedure, it is subject to initialization requirements. See: 16.4.8

[sharedObj]
Name of shared object that contains userRoutine. If the sharedObj argument is not provided the executable itself will be searched for userRoutine.
[rc]
Return code; equals ESMF_SUCCESS if there are no errors.

22.4.9 ESMF_MethodExecute - Execute user method attached to GridComp


INTERFACE:

   ! Private name; call using ESMF_MethodExecute()
   subroutine ESMF_MethodGridCompExecute(gcomp, label, index, existflag, &
     userRc, rc)
ARGUMENTS:
     type(ESMF_GridComp)                     :: gcomp
     character(len=*), intent(in)            :: label
     integer,          intent(in),  optional :: index
     logical,          intent(out), optional :: existflag
     integer,          intent(out), optional :: userRc
     integer,          intent(out), optional :: rc
DESCRIPTION:

Execute attached method.

The arguments are:

gcomp
The ESMF_GridComp to attach to.
label
Label of method.
[index]
Integer modifier to distinguish multiple entries with the same label.
[existflag]
Returned .true. indicates that the method specified by label exists and was executed. A return value of .false. indicates that the method does not exist and consequently was not executed. By default, i.e. if existflag was not specified, the latter condition will lead to rc not equal ESMF_SUCCESS being returned. However, if existflag was specified, a method not existing is not an error condition.
[userRc]
Return code set by attached method before returning.
[rc]
Return code; equals ESMF_SUCCESS if there are no errors.

22.4.10 ESMF_MethodExecute - Execute user method attached to CplComp


INTERFACE:

   ! Private name; call using ESMF_MethodExecute()
   subroutine ESMF_MethodCplCompExecute(cplcomp, label, index, existflag, &
     userRc, rc)
ARGUMENTS:
     type(ESMF_CplComp)                      :: cplcomp
     character(len=*), intent(in)            :: label
     integer,          intent(in),  optional :: index
     logical,          intent(out), optional :: existflag
     integer,          intent(out), optional :: userRc
     integer,          intent(out), optional :: rc
DESCRIPTION:

Execute attached method.

The arguments are:

cplcomp
The ESMF_CplComp to attach to.
label
Label of method.
[index]
Integer modifier to distinguish multiple entries with the same label.
[existflag]
Returned .true. indicates that the method specified by label exists and was executed. A return value of .false. indicates that the method does not exist and consequently was not executed. By default, i.e. if existflag was not specified, the latter condition will lead to rc not equal ESMF_SUCCESS being returned. However, if existflag was specified, a method not existing is not an error condition.
[userRc]
Return code set by attached method before returning.
[rc]
Return code; equals ESMF_SUCCESS if there are no errors.

22.4.11 ESMF_MethodRemove - Remove user method attached to GridComp


INTERFACE:

   ! Private name; call using ESMF_MethodRemove()
   subroutine ESMF_MethodGridCompRemove(gcomp, label, index, rc)
ARGUMENTS:
     type(ESMF_GridComp)                      :: gcomp
     character(len=*),  intent(in)            :: label
      integer,          intent(in),  optional :: index
    integer,            intent(out), optional :: rc
DESCRIPTION:

Remove attached method.

The arguments are:

gcomp
The ESMF_GridComp to attach to.
label
Label of method.
[index]
Integer modifier to distinguish multiple entries with the same label.
[rc]
Return code; equals ESMF_SUCCESS if there are no errors.

22.4.12 ESMF_MethodRemove - Remove user method attached to CplComp


INTERFACE:

   ! Private name; call using ESMF_MethodRemove()
   subroutine ESMF_MethodCplCompRemove(cplcomp, label, index, rc)
ARGUMENTS:
     type(ESMF_CplComp)                      :: cplcomp
     character(len=*), intent(in)            :: label
     integer,          intent(in),  optional :: index
     integer,          intent(out), optional :: rc
DESCRIPTION:

Remove attached method.

The arguments are:

cplcomp
The ESMF_CplComp to attach to.
label
Label of method.
[index]
Integer modifier to distinguish multiple entries with the same label.
[rc]
Return code; equals ESMF_SUCCESS if there are no errors.

23 Web Services

23.1 Description

The goal of the ESMF Web Services is to provide the tools to allow ESMF Users to make their Components available via a web service. The first step is to make the Component a service, and then make it accessible via the Web.

Figure 11: The diagram describes the ESMF Web Services software architecture. The architecture defines a multi-tiered set of applications that provide a flexible approach for accessing model components.
\scalebox{0.5}{\includegraphics{webservices}}

At the heart of this architecture is the Component Service; this is the application that does the model work. The ESMF Web Services part provides a way to make the model accessible via a network API (Application Programming Interface). ESMF provides the tools to turn a model component into a service as well as the tools to access the service from the network.

The Process Controller is a stand-alone application that provides a control mechanism between the end user and the Component Service. The Process Controller is responsible for managing client information as well as restricting client access to a Component Service. (The role of the Process Controller is expected to expand in the future.)

The tomcat/axis2 application provides the access via the Web using standard SOAP protocols. Part of this application includes the SOAP interface definition (using a WSDL file) as well as some java code that provides the access to the Process Controller application.

Finally, the Registrar maintains a list of Component Services that are currently available; Component Services register themselves with the Registrar when they startup, and unregister themselves when they shutdown. The list of available services is maintained in an XML file and is accessible from the Registrar using its network API.

23.1.1 Creating a Service around a Component

23.1.2 Code Modifications

One of the goals in providing the tools to make Components into services was to make the process as simple and easy as possible. Any model component that has been implemented using the ESMF Component Framework can easily be turned into a Component Services with just a minor change to the Application driver code. (For details on the ESMF Framework, see the ESMF Developers Documentation.)

The primary function in ESMF Web Services is the ESMF_WebServicesLoop routine. This function registers the Component Service with the Registrar and then sets up a network socket service that listens for requests from a client. It starts a loop that waits for incoming requests and manages the routing of these requests to all PETs. It is also responsible for making sure the appropriate ESMF routine (ESMF_Initialize, ESMF_Run or ESMF_Finalize) is called based on the incoming request. When the client has completed its interaction with the Component Service, the loop will be terminated and it will unregister the Component Service from the Registrar.

To make all of this happen, the Application Driver just needs to replace its calls to ESMF_Initialize, ESMF_Run, and ESMF_Finalize with a single call to ESMF_WebServicesLoop.

	use ESMF_WebServMod
	....

	call ESMF_WebServicesLoop(gridComponent, portNumber, returnCode)

That's all there is to turning an ESMF Component into a network-accessible ESMF Component Service. For a detailed example of an ESMF Component turned into an ESMF Component Service, see the Examples in the Web Services section of the Developer' Guide.

23.1.3 Accessing the Service

Now that the Component is available as a service, it can be accessed remotely by any client that can communicate via TCP sockets. The ESMF library, in addition to providing the service tools, also provides the classes to create C++ clients to access the Component Service via the socket interface.

However, the goal of ESMF Web Services is to make an ESMF Component accessible through a standard web service, which is accomplished through the Process Controller and the Tomcat/Axis2 applications

23.1.4 Client Application via C++ API

Interfacing to a Component service is fairly simple using the ESMF library. The following code is a simple example of how to interface to a Component Service in C++ and request the initialize operation (the entire sample client can be found in the Web Services examples section of the ESMF Distribution):

	#include "ESMCI_WebServCompSvrClient.h"

	int  main(int  argc, char*  argv[])
	{
   	    int    portNum = 27060;
      	    int    clientId = 101;
   	    int    rc = ESMF_SUCCESS;

   	    ESMCI::ESMCI_WebServCompSvrClient   
                         client("localhost", portNum, clientId);

   	    rc = client.init();
   	    printf("Initialize return code: %d\n", rc);
	}

To see a complete description of the NetEsmfClient class, refer to the netesmf library section of the Web Services Reference Manual.

23.1.5 Process Controller

The Process Controller is basically just a instance of a C++ client application. It manages client access to the Component Service (only 1 client can access the service at a time), and will eventually be responsible for starting up and shutting down instances of Component Services (planned for a future release). The Process Controller application is built with the ESMF library and is included in the apps section of the distribution.

23.1.6 Tomcat/Axis2

The Tomcat/Axis2 "application" is essentially the Apache Tomcat server using the Apache Axis2 servlet to implement web services using SOAP protocols. The web interface is defined by a WSDL file, and its implementation is handled by the Component Connector java code. Tomcat and Axis2 are both open source projects that should be downloaded from the Apache web site, but the WSDL file, the Component Connector java code, and all required software for supporting the interface can be found next to the ESMF distribution in the web_services_server directory. This code is not included with the ESMF distribution because they can be distributed and installed independent of each other.

23.2 Use and Examples

The following examples demonstrate how to use ESMF Web Services.

23.2.1 Making a Component available through ESMF Web Services

In this example, a standard ESMF Component is made available through the Web Services interface.

The first step is to make sure your callback routines for initialize, run and finalize are setup. This is done by creating a register routine that sets the entry points for each of these callbacks. In this example, we've packaged it all up into a separate module.

module ESMF_WebServUserModel

  ! ESMF Framework module
  use ESMF

  implicit none

  public ESMF_WebServUserModelRegister

  contains

  !-------------------------------------------------------------------------
  !  The Registration routine
  !  
  subroutine ESMF_WebServUserModelRegister(comp, rc)
    type(ESMF_GridComp)  :: comp
    integer, intent(out) :: rc

    ! Initialize return code
    rc = ESMF_SUCCESS

    print *, "User Comp1 Register starting"

    ! Register the callback routines.

    call ESMF_GridCompSetEntryPoint(comp, ESMF_METHOD_INITIALIZE, &
                                    userRoutine=user_init, rc=rc)
    if (rc/=ESMF_SUCCESS) return ! bail out

    call ESMF_GridCompSetEntryPoint(comp, ESMF_METHOD_RUN, &
                                    userRoutine=user_run, rc=rc)
    if (rc/=ESMF_SUCCESS) return ! bail out

    call ESMF_GridCompSetEntryPoint(comp, ESMF_METHOD_FINALIZE, &
                                    userRoutine=user_final, rc=rc)
    if (rc/=ESMF_SUCCESS) return ! bail out

    print *, "Registered Initialize, Run, and Finalize routines"
    print *, "User Comp1 Register returning"

  end subroutine

  !-------------------------------------------------------------------------
  !  The Initialization routine
  !  
  subroutine user_init(comp, importState, exportState, clock, rc)
    type(ESMF_GridComp)  :: comp
    type(ESMF_State)     :: importState, exportState
    type(ESMF_Clock)     :: clock
    integer, intent(out) :: rc

    ! Initialize return code
    rc = ESMF_SUCCESS

    print *, "User Comp1 Init"

  end subroutine user_init

  !-------------------------------------------------------------------------
  !  The Run routine
  !  
  subroutine user_run(comp, importState, exportState, clock, rc)
    type(ESMF_GridComp)  :: comp
    type(ESMF_State)     :: importState, exportState
    type(ESMF_Clock)     :: clock
    integer, intent(out) :: rc

    ! Initialize return code
    rc = ESMF_SUCCESS

    print *, "User Comp1 Run"

  end subroutine user_run

  !-------------------------------------------------------------------------
  !  The Finalization routine
  !  
  subroutine user_final(comp, importState, exportState, clock, rc)
    type(ESMF_GridComp)  :: comp
    type(ESMF_State)     :: importState, exportState
    type(ESMF_Clock)     :: clock
    integer, intent(out) :: rc

    ! Initialize return code
    rc = ESMF_SUCCESS

    print *, "User Comp1 Final"

  end subroutine user_final

end module ESMF_WebServUserModel

The actual driver code then becomes very simple; ESMF is initialized, the component is created, the callback functions for the component are registered, and the Web Service loop is started.

program WebServicesEx
#include "ESMF.h"

  ! ESMF Framework module
  use ESMF
  use ESMF_TestMod

  use ESMF_WebServMod
  use ESMF_WebServUserModel

  implicit none

  ! Local variables
  type(ESMF_GridComp) :: comp1     !! Grid Component
  integer             :: rc        !! Return Code
  integer             :: finalrc  !! Final return code
  integer             :: portNum   !! The port number for the listening socket

A listening socket will be created on the local machine with the specified port number. This socket is used by the service to wait for and receive requests from the client. Check with your system administrator to determine an appropriate port to use for your service.

  finalrc = ESMF_SUCCESS

  call ESMF_Initialize(defaultlogfilename="WebServicesEx.Log", &
                    logkindflag=ESMF_LOGKIND_MULTI, rc=rc)

  ! create the grid component 
  comp1 = ESMF_GridCompCreate(name="My Component", rc=rc)

  ! Set up the register routine 
  call ESMF_GridCompSetServices(comp1, &
          userRoutine=ESMF_WebServUserModelRegister, rc=rc)

  portNum = 27060

  ! Call the Web Services Loop and wait for requests to come in
  !call ESMF_WebServicesLoop(comp1, portNum, rc=rc)

The call to ESMF_WebServicesLoop will setup the listening socket for your service and will wait for requests from a client. As requests are received, the Web Services software will process the requests and then return to the loop to continue to wait.

The 3 main requests processed are INIT, RUN, and FINAL. These requests will then call the appropriate callback routine as specified in your register routine (as specified in the ESMF_GridCompSetServices call). In this example, when the INIT request is received, the user_init routine found in the ESMF_WebServUserModel module is called.

One other request is also processed by the Component Service, and that is the EXIT request. When this request is received, the Web Services loop is terminated and the remainder of the code after the ESMF_WebServicesLoop call is executed.

  call ESMF_Finalize(rc=rc)

end program WebServicesEx

23.3 Restrictions and Future Work

  1. Manual Control of Process. Currently, the Component Service must be manually started and stopped. Future plans include having the Process Controller be responsible for controlling the Component Service processes.
  2. Data Streaming. While data can be streamed from the web server to the client, it is not yet getting the data directly from the Component Service. Instead, the Component Service exports the data to a file which the Process Controller can read and return across the network interface. The data streaming capabilities will be a major component of future improvements to the Web Services architecture.

23.4 Class API

23.4.1 ESMF_WebServicesLoop


INTERFACE:

   subroutine ESMF_WebServicesLoop(comp, portNum, clientId, registrarHost, rc)
ARGUMENTS:
     type(ESMF_GridComp)                         :: comp
     integer,            intent(inout), optional :: portNum
     character(len=*),   intent(in),    optional, target :: clientId
     character(len=*),   intent(in),    optional, target :: registrarHost
     integer,            intent(out),   optional :: rc
DESCRIPTION:

Encapsulates all of the functionality necessary to setup a component as a component service. On the root PET, it registers the component service and then enters into a loop that waits for requests on a socket. The loop continues until an "exit" request is received, at which point it exits the loop and unregisters the service. On any PET other than the root PET, it sets up a process block that waits for instructions from the root PET. Instructions will come as requests are received from the socket.

The arguments are:

[comp]
ESMF_CplComp object that represents the Grid Component for which routine is run.
[portNum]
Number of the port on which the component service is listening.
[clientId]
Identifier of the client responsible for this component service. If a Process Controller application manages this component service, then the clientId is provided to the component service application in the command line. Otherwise, the clientId is not necessary.
[registrarHost]
Name of the host on which the Registrar is running. Needed so the component service can notify the Registrar when it is ready to receive requests from clients.
[rc]
Return code; equals ESMF_SUCCESS if there are no errors.

23.4.2 ESMF_WebServicesCplCompLoop


INTERFACE:

   subroutine ESMF_WebServicesCplCompLoop(comp, portNum, clientId, registrarHost, rc)
ARGUMENTS:
     type(ESMF_CplComp)                         :: comp
     integer,           intent(inout), optional :: portNum
     character(len=*),  intent(in),    optional, target :: clientId
     character(len=*),  intent(in),    optional, target :: registrarHost
     integer,           intent(out),   optional :: rc
DESCRIPTION:

Encapsulates all of the functionality necessary to setup a component as a component service. On the root PET, it registers the component service and then enters into a loop that waits for requests on a socket. The loop continues until an "exit" request is received, at which point it exits the loop and unregisters the service. On any PET other than the root PET, it sets up a process block that waits for instructions from the root PET. Instructions will come as requests are received from the socket.

The arguments are:

[comp]
ESMF_CplComp object that represents the Grid Component for which routine is run.
[portNum]
Number of the port on which the component service is listening.
[clientId]
Identifier of the client responsible for this component service. If a Process Controller application manages this component service, then the clientId is provided to the component service application in the command line. Otherwise, the clientId is not necessary.
[registrarHost]
Name of the host on which the Registrar is running. Needed so the component service can notify the Registrar when it is ready to receive requests from clients.
[rc]
Return code; equals ESMF_SUCCESS if there are no errors.

esmf_support@ucar.edu